[UPDATE 7!/DEV/ANDROID/ROM]Project DroiD2

Search This thread
By:
Advanced…
J

jiangxue

Member
Feb 11, 2010
24
6
open exec error

i use xdandroid with kernel Image(on megandroid).i get so many <open exec error>. looked it not find files.
in the next i touch the screen,have response . next the screem become black.
oh i Remember in andboot have Establish data.img.
 
J

jiangxue

Member
Feb 11, 2010
24
6
kernel problem?!

i use htc touch pro2 with xdandroid and use initrd.gz on megandroid.rar.
it can boot!
so i think we need To compile kernel.

have someone can do it?
 
D

DaCommanda

Member
Mar 9, 2012
32
3
Augsburg
Maybe a loop????

Hy everybody....

I'm new to XDA-Developers, but I followed every Post in this thread.
So I decided to join. :)

The last few entries were interesting to me, that I downloaded the megandroid.rar.

As I tried it on my Touch2/Mega, I figured out, that there is maybe a loop in accessing the SD-Card.:confused:

Maybe it could help to use the firmware of HTC Buzz aka Wildfire.

I also can try it by myself (and for us(!!!)), but I need some help in compiling the initrd.gz and zImage.

By the way I'm using Ubuntu 11.04 as System-OS on my computer.

I hope I can help developing a working Android for our Mega.


Greetings

DaCommanda
 
Last edited:
D

DaCommanda

Member
Mar 9, 2012
32
3
Augsburg
CPUFREQ Recover Policy - WTF?!?!?!

My Mega hangs there at boot: [607.718701 ] perflock_notifier_call : cpufreq recover policy 480000 528000 :(

Do you think that we can fix this issue by setting a fixed cpufrequency???

Maybe with "SET CPUFREQ RECOVER 528000" or somthing like that??? :confused:
 
J

jiangxue

Member
Feb 11, 2010
24
6
We cant found problem.isnt it?

And i have a idea for found problem.
We can use initrd to Test and we can found the problem is there .
 
G

GuestK00163

Guest
As you could see in my last message, i bought a android phone, but thats not a reason to say that touch 2 is useless!
 
Z

zebo283

New member
May 1, 2012
2
0
[ 371.629103] init:waitpid returned pid 175, status = 000000b
[ 372.177771] init: procces 'servicemanager', pid 175 exited
[ 372.708003] init 'servicemanager' killing any children in process group
[ 373.368597] smsm_irq_handler: 891 :ARM9 will go crash!!! ##
[ 373.401848] ARM9 has CRASHED
[ 373.534968] smem: DIAG ''
[ 373.668051]
[ 373.668056]
[ 373.668063] board-mega.c: banamas reset
[ 373.668071]
htc mega opening for wm
please help me :confused:
 
F

forcible79

Member
May 30, 2012
10
0
HTC Touch2 T3333 Android!

Hello Guys. I am quite new in this forum. I read all conversations and because of i am new i couldn't understand anything:)

Just my question is can i use android in my HTC Touch2 T3333 in stead of windows. If need to read any page and you answer me, i will be pleased.

How can i do this what should i do etc..
 
E

ebk71

Member
Jan 23, 2007
36
2
forcible79 said:
Hello Guys. I am quite new in this forum. I read all conversations and because of i am new i couldn't understand anything:)

Just my question is can i use android in my HTC Touch2 T3333 in stead of windows. If need to read any page and you answer me, i will be pleased.

How can i do this what should i do etc..
Click to expand...
Click to collapse

No! But you are not serious are you? If you had read all conversations you would have understand this topic is about developing android to run on touch. And that hasn't succeeded yet..............and probably wil not happen.
 
You must log in or register to reply here.

Similar threads

A
  • Locked
[Ended] Android on HTC Touch2 [9/8/10] Project Started, Phone Received
Replies
462
Views
313K
Mr. Clown
Mr. Clown
F
Project [ROM/ANDROID] Android fo HTC MEGA//Updated 15/01/2011
Replies
281
Views
179K
S
smala
Captainkrtek
  • Locked
10/12/10 - Updated - Android On Mega, Project Thread and Status Updates
Replies
183
Views
92K
Mr. Clown
Mr. Clown
bornotty
[ROM/BOUNTY] Touch2/Mega Android Port
Replies
133
Views
81K
xTerraH
xTerraH
udK
Mega - ROM - Hotfix - User Manual - roll-up thread
Replies
98
Views
118K
A
acimport

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 13
    R
    RDilus
    UPDATE 7
    Im still alive in trying but still stuck in haret mean while i created a android version that SHOULD work if i could boot it more on this later!

    UPDATE 6
    If you are a dev or got any thing to ask i opened a chat in EFNET (IRC)
    Channel name is #DroiD2 see you there!

    UPDATE 5
    It seems windows 6.1 works with haret alot better.
    I installed this rom
    http://xdaforums.com/showthread.php?t=756020
    and used the exe from UPDATE 4 and the default.txt from UPDATE 3.
    Now it don't restart or boot it freeze so it is a step closer of booting android.
    Since the HTC Touch Cruise have the exact same specs we could use those roms to run it on the HTC Touch2 so ill almost get in android now we are one step closer again!

    UPDATE 4
    I was searching in the other android post for this device and found a haret that works but still no android boot.
    I will attach the file below and make a short movie of my progress so far now.
    Remove the ''.zip'' part to get it work.

    UPDATE 3
    Update time!
    At this moment i am fixing the default.txt and getting one step closer now!
    Here is the new default.txt code

    Code: 
    Set RAMSIZE 0x8000000
Set RAMADDR 0x1000000
set MTYPE 2305
set KERNEL zImage
Set initrd initrd.lzma
Set cmdline ""board-mega.panel_type=1 pm.sleep_mode=1 mddi.width=320 mddi.height=480 no_console_suspend board-htcmega-battery.battery_capacity=1100 clock-7x00.mddi=0xa51 lcd.density=160 ppp.nostart=0 sys_partition=/sdcard/andboot/system.img data_partition=/sdcard/andboot/data.img"
boot

    Still i getting this error.
    ''Terminating haret due to unhandled exception (pc=011c4640)''
    A older Haret might fix it but don't know at this moment i am using 0.5.2
    But i am getting one step closer now!

    UPDATE 2
    Ok this is a kernel and rom that might also work on the Touch2 and got the correct settings also.
    But i need still a MTYPE without that i can't boot.
    Here is the default.txt code for now.
    Code: 
    set RAMSIZE 0x08000000 set RAMADDR 0x10000000 set MTYPE 2293 set KERNEL zImage set initrd initrd.lzma set cmdline "no_console_suspend  ppp.nostart=0 hw3d.version=1 mddi.width=240 mddi.height=320 clock-7x00.mddi=0xa51 board-htcpolaris.panel_type=1 board-htcpolaris.no_boot_vibration=0 sys_partition=/sdcard/andboot/system.img data_partition=/sdcard/andboot/data.img"
boot
    I know it is from the porlaris but they have the same hardware so it SHOULD work.
    Here is a link to the rom i trying to use for now.
    http://www.megaupload.com/?d=839R4Z47

    UPDATE
    It appears the HTC Touch Cruise have also the exact same specs and hardware and that device got a android port!!! (NAND/SD HARET/ANDBOOT)
    LINK
    http://xdaforums.com/forumdisplay.php?f=640

    Only diffrence of those two are HTC Touch Cruise have other hard buttons and have Windows CE kernel 5.2 and the HTC Touch2 got Windows CE 5.2.2
    But this gonna make it even more easy!

    Since no one have ported droid to this device yet i gonna make a start my self.
    I am also want some help ofcourse but back to main topic.

    Since this cpu is a 32bit Qualcomm MSM7225, 528MHz ram 256mb and rom 512mb android porting dont need to be hard at all!
    In fact really easy to-do because there alot phones with the same specs same as the Touch2 and they run droid also.
    Here is a device list with same cpu ,amount of rom/ram and resolution

    HTC Tattoo A3232 (HTC Click 100)
    T-Mobile Pulse Mini (Huawei U8110)
    HTC Wildfire A3333 (HTC Buzz)
    Vodafone 858 Smart (Huawei U8160)

    So porting droid to it won't be that hard.
    The close one to the Touch2 is HTC Click only some buttoms are diff (and some other functions i dindt talk about it yet).

    There is hope and Project DroiD2 will bring it!
    View
    5
    kipill
    kipill
    There is some progress, now booting the kernel freeze at:
    Code: 
    [131127.830810] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
    View
    5
    kipill
    kipill
    Nice news!

    Now we can see Framebuffer console,when kernel booting :)
    hpim1070e.th.jpg
    [/URL]
    Big thanks for Schlund!
    View
    4
    kipill
    kipill
    Haret works!

    Please,Be patient.Yesterday I added the vbro code in head.S of kernel and its work!So haret works and kernel is relocated in RAM.Later I will try add this code into board-mega.c - need to know how works MMU on in Linux and device initialization.
    View
    4
    kipill
    kipill
    Hey,guys!Its really my photocam bug :D I use Tatoo kernel sources some is added, some is removed. But the process of debugging has become much easier and I hope soon to be released. Now loading crash on stage:
    Code: 
    pmem: 1 init
pmem_adsp: 0 init
    .... and unhandled exception :)
    View

New posts