It is possible, but it won't boot that easily. To get it booting will take a lot of time, like till June next year (provided you do not give up).

Good to know that nAa still working hard on minis...!!

Sent from my LT26i using xda app-developers app

Originally Posted by sgt. meow

It is possible, but it won't boot that easily. To get it booting will take a lot of time, like till June next year (provided you do not give up).

The kernel that nAa is building is like 2.6.32.6 or something?

Originally Posted by pongnamu

The kernel that nAa is building is like 2.6.32.6 or something?

Actually 2.6.32.9

Originally Posted by ktg7777

Actually 2.6.32.9

Thanks for correcting

Sent from my E10i using xda app-developers app

Συμπατριώτη έκανα μαλακία!

Hello there. I did something silly, I was on gb nAa with minicm7 and I wanted to try cm10.
So I used flashtool to flash the new jb kernel for minicm10, I flashed minicm10 all ok!

But because it was a little bit more slow than 7 i rushed and I wanted to roll back to MiniCM7.

So I FORGOT the "uninstall" step for the new kernel and I just used flashtool to install the old nAa kernel.

So now, I got no recovery, cannot do anything with the back button and plugging the usb (so no seus and/or flashtool).

It's a super brick.

Is there anything I can do to un-brick from this situation ?

I remind: no boot, just got stuck in the nAa logo, no recovery, no back button + usb combination for seus.

Originally Posted by chrismfz

Συμπατριώτη έκανα μαλακία!

Hello there. I did something silly, I was on gb nAa with minicm7 and I wanted to try cm10.
So I used flashtool to flash the new jb kernel for minicm10, I flashed minicm10 all ok!

But because it was a little bit more slow than 7 i rushed and I wanted to roll back to MiniCM7.

So I FORGOT the "uninstall" step for the new kernel and I just used flashtool to install the old nAa kernel.

So now, I got no recovery, cannot do anything with the back button and plugging the usb (so no seus and/or flashtool).

It's a super brick.

Is there anything I can do to un-brick from this situation ?

I remind: no boot, just got stuck in the nAa logo, no recovery, no back button + usb combination for seus.

Prepare flashtool to flash the old kernel, and then:
While your phone is on the nAa logo, plug in your usb-cable, press home and power together and as soon as the screen goes black, press back-button to go into flashmode.

Originally Posted by chrismfz

Συμπατριώτη έκανα μαλακία!

Hello there. I did something silly, I was on gb nAa with minicm7 and I wanted to try cm10.
So I used flashtool to flash the new jb kernel for minicm10, I flashed minicm10 all ok!

But because it was a little bit more slow than 7 i rushed and I wanted to roll back to MiniCM7.

So I FORGOT the "uninstall" step for the new kernel and I just used flashtool to install the old nAa kernel.

So now, I got no recovery, cannot do anything with the back button and plugging the usb (so no seus and/or flashtool).

It's a super brick.

Is there anything I can do to un-brick from this situation ?

I remind: no boot, just got stuck in the nAa logo, no recovery, no back button + usb combination for seus.

your phone is not brick.

> keep your phone on in whatever state (i believe in that situation your phone cant be turn off except leaving battery to drain)
> prepare flashtools to install nAa JB kernel
> connect your usb cable phone to computer
> force restart your phone by pressing home and power button together.
> nAa JB kernel will be flashing
> now, you can enter cwm to start "uninstall step"

Originally Posted by SFU11

your phone is not brick.

> keep your phone on in whatever state (i believe in that situation your phone cant be turn off except leaving battery to drain)
> prepare flashtools to install nAa JB kernel
> connect your usb cable phone to computer
> force restart your phone by pressing home and power button together.
> nAa JB kernel will be flashing
> now, you can enter cwm to start "uninstall step"

I can reboot it with home+power. I can also shut it down because I cut it open and I remove the battery cable.

But pressing back + usb plug doesn't boot. Flashtool doesn't sees it.
Only when I leave the back button it will open again.
That's why I said no back+usb

Originally Posted by chrismfz

I can reboot it with home+power. I can also shut it down because I cut it open and I remove the battery cable.

But pressing back + usb plug doesn't boot. Flashtool doesn't sees it.
Only when I leave the back button it will open again.
That's why I said no back+usb

Okay. But you can try my method... you don't have to turn off your phone and using back button..