i waited for my friend to buy his neo v now that he has we are about to do the testpoint procedure on both of our phones. i have some questions tho ..
1.the order of things (as guided from 1st post) is:
-turn off phone, remove battery cover, remove testpoint cap.
-start s1tool, connect the phone in flash mode (holding BACK when connecting via USB)
-connect testpoint (battery negative connector on phone !!NOT THE MINUS OF THE BATTERY!! -- wire with paperclip -- testpoint dot)
-hold BACK button and connect the USB while testpoint IS CONNECTED. (remove testpoint here or later?)
-(install drivers if needed, i connected the phone in flash mode BEFORE i did testpoint procedure so the drivers are installed when I DO THE PROCEDURE AND DONT HAVE TO INSTALL THEM IN MID OPERATION)
-(is this the right driver: SEMC Flash Device, driver version 2.2.0.5, dirver provider Sony Ericsson Mobile Communications, date 04.05.2010)
-press Patch SEMCBoot button in s1tool.
-the s1tool does its magic and tells when to remove testpoint (that is few seconds)
-done. u have testpoint unlocked bootloader, witch keeps DRM keys and can be relocked via the restore button in s1tool (just connect the phone in flash mode and press restore)
so....
-do we do this with battery in or out? on pics i dont see any battery arround so i guess its with batery out.
-will i be able to update via pc companion / SEUS?
-am i right about the order of things?
thx alot and i hope this will help alot more ppl.