As mentioned in;
http://xdaforums.com/showthread.php?t=837266
in case it got lost at the end, we now have the US TMobile Galaxy Tab making/receiving phone calls.
Download Odin3 v1.70
to flash.
Used;
P1_20100909.pit
for formating. Selected 'Repartition' 'AutoReboot' 'fResetTime'. That rebooted with nothing apparently working but the filesystem structure was setup.
Download P1000XXJHA
for the base rom.
Then, unchecked the 'repartion' part (as the structure is setup, don't want to screw it up, the next flashing needs to 'drop in' where the structure is.
Then, loading into the JHA.rar just downloaded, flash that and reboot.
To update to latest;
download and flash;
P1000OXAJK1.tar
Pop in your SIM.
At this point, reboot. It'll probably show 'Emergency Calls only'
Went into the wireless/Mobile Settings/NetworkOperators and made sure it was connected to TMobile.
At that point, I made my first call and it worked.
Received a call too, also working.
Good luck. If there's an easier way todo this, I'm all ears as I had a few moments of 'uh oh, why's it now showing anything' but the fantastic forum posts here with people having the same problem resolved that.
Only working on Edge at this time also.
No idea how later updates will work too, so caveat emptor.
*Edit. Further adventures.
So, now having the euro stuff on to make calls, but having the issues, wanted to try a few things. Put the US Tmobile back on to get 3g but lose voice.
Firing up a call, logs showing;
[ 11-19 19:11:19.179 2578:0xa12 D/GSM ]
Poll ServiceState done: oldSS=[0 home T-Mobile T-Mobile 310260 (manual) UMTS CSS not supported -1 -1RoamInd: -1DefRoamInd: -1EmergOnly: false] newSS=[0 home T-Mobile T-Mobile 310260 (manual) UMTS CSS not supported -1 -1RoamInd: -1DefRoamInd: -1EmergOnly: false] oldGprs=0 newGprs=0 oldType=UMTS newType=UMTS
[ 11-19 19:11:19.179 2578:0xa12 D/GSM ]
[GsmMultiDCT] GSMDataConnTrack handleMessage { what=29 when=46864 }
[ 11-19 19:11:19.242 2578:0xa12 D/GSM ]
[GsmMultiDCT] Get PreferredAPN
[ 11-19 19:11:19.242 2578:0xa12 D/GSM ]
[GsmMultiDCT] Clean up connection due to apnChanged
[ 11-19 19:11:19.242 2578:0xa12 D/GSM ]
[GsmMultiDCT] setState: DISCONNECTING
[ 11-19 19:11:19.242 2578:0xa12 D/GSM ]
[GsmMultiDCT] cleanUpConnection: teardown, call conn.disconnect
Interesting the error message shows it's APN. Leads me to (wildly) guess that a new radio COULD be worked out, but also the carriers could send out an update message to allow it to work without other upgrades. If so, then there may be an 'enable switch' we can use to get it working too.
http://xdaforums.com/showthread.php?t=837266
in case it got lost at the end, we now have the US TMobile Galaxy Tab making/receiving phone calls.
Download Odin3 v1.70
to flash.
Used;
P1_20100909.pit
for formating. Selected 'Repartition' 'AutoReboot' 'fResetTime'. That rebooted with nothing apparently working but the filesystem structure was setup.
Download P1000XXJHA
for the base rom.
Then, unchecked the 'repartion' part (as the structure is setup, don't want to screw it up, the next flashing needs to 'drop in' where the structure is.
Then, loading into the JHA.rar just downloaded, flash that and reboot.
To update to latest;
download and flash;
P1000OXAJK1.tar
Pop in your SIM.
At this point, reboot. It'll probably show 'Emergency Calls only'
Went into the wireless/Mobile Settings/NetworkOperators and made sure it was connected to TMobile.
At that point, I made my first call and it worked.
Received a call too, also working.
Good luck. If there's an easier way todo this, I'm all ears as I had a few moments of 'uh oh, why's it now showing anything' but the fantastic forum posts here with people having the same problem resolved that.
Only working on Edge at this time also.
No idea how later updates will work too, so caveat emptor.
*Edit. Further adventures.
So, now having the euro stuff on to make calls, but having the issues, wanted to try a few things. Put the US Tmobile back on to get 3g but lose voice.
Firing up a call, logs showing;
[ 11-19 19:11:19.179 2578:0xa12 D/GSM ]
Poll ServiceState done: oldSS=[0 home T-Mobile T-Mobile 310260 (manual) UMTS CSS not supported -1 -1RoamInd: -1DefRoamInd: -1EmergOnly: false] newSS=[0 home T-Mobile T-Mobile 310260 (manual) UMTS CSS not supported -1 -1RoamInd: -1DefRoamInd: -1EmergOnly: false] oldGprs=0 newGprs=0 oldType=UMTS newType=UMTS
[ 11-19 19:11:19.179 2578:0xa12 D/GSM ]
[GsmMultiDCT] GSMDataConnTrack handleMessage { what=29 when=46864 }
[ 11-19 19:11:19.242 2578:0xa12 D/GSM ]
[GsmMultiDCT] Get PreferredAPN
[ 11-19 19:11:19.242 2578:0xa12 D/GSM ]
[GsmMultiDCT] Clean up connection due to apnChanged
[ 11-19 19:11:19.242 2578:0xa12 D/GSM ]
[GsmMultiDCT] setState: DISCONNECTING
[ 11-19 19:11:19.242 2578:0xa12 D/GSM ]
[GsmMultiDCT] cleanUpConnection: teardown, call conn.disconnect
Interesting the error message shows it's APN. Leads me to (wildly) guess that a new radio COULD be worked out, but also the carriers could send out an update message to allow it to work without other upgrades. If so, then there may be an 'enable switch' we can use to get it working too.
Last edited: