So very Jealous!!!
Benny. How about doing some of that magic for the V11a rom?
Good Job!!!
If you edited the build.prop to change the device identifier it probably won't work. If you didn't it probably will.
Working fine in my V71a, I have noticed an overall speed improvement..
Enviado desde mi HTC Sensation usando Tapatalk 2
I'll try it.Download my rom rom and replace the boot.img with yours, make a back up and flash it to if it works
I loaded benny's "tweaked" rom from the Optik onto mu V11A.
Replaced the boot.img with a backup from my rom.
No Data Wipe!!!
Everything so far looking good. Just replaced the launched with Go Launcher HD, as the stock launcher on the Optic is not HD.
Will give more feedback if I find anything not working..
THX B
I found this on page zte spain. It appears that says something about updating, I'll try and comment.
http://wwwen.zte.com.cn/endata/mobile/Spain/
It is a system restore . It works like my 10" recovery. It recovers SmartTab10-MSM8260-V02d-Dec022011-Vodafone-ES version from stock recovery(3e) using external sdcard.
I found this on page zte spain. It appears that says something about updating, I'll try and comment.
http://wwwen.zte.com.cn/endata/mobile/Spain/
so with this update I believe we can build a stock version
the version for V71A you can download also from this mirror
http://wtrns.fr/Xjk18D4e2MxaxQw
Please note that will be only 14 days available to download
A new optimized version of CWM for 7"and 10" tabs has been put together by joe.stone. I will also keep utkanos' links available below for those who prefer his versions or wish to thank him for his early efforts in making our tablets awesome
For those who have troubles with cwm recovery (freeze while backup ) i have created a new version. Flashable from fastboot.
10" CWM Recovery
7" CWM Recovery
Credit goes to joe.stone.
If you updated your tablet ROM via OTA or updater exe and can no longer install CWM, follow the following instructions:.
In firmware v03b fastboot flash is disabled and from a running system flash_image will fail too.
Download the twrp recovery http://goo.im/devs/joestone/twrp/v71_recovery.img
download the twrp recovery zip flashable version too
http://goo.im/devs/joestone/twrp/V71A_TWRP.zip
download kernel #60
http://www.4shared.com/zip/tzrUo5_N/v7_kernel_60.html?
copy the two zip files to the sdcard
If you want flash kernel#60 then do the following:
adb reboot bootloader
the tablet will reboot and you will get only a blank screen . Be sure that the drivers are installed from windows update for the fastboot interface.
check it with : fastboot devices. If you get waiting for device the drivers are not installed.
fastboot boot v71_recovery.img
The twrp recovery comes up. Now you can install twrp by selecting install menu. Browse to the v71twrp.zip on the sd and install it. Now you have permanent twrp recovery.
now go back to install menu browse to the v7_kernel_60.zip and install it.
reboot and enjoy.
These are kernel #60 links for the other models :
Sprint Optik (V55)
http://www.4shared.com/zip/RTZrSXyV/v55_kernel_60.html?
SmartTab10 (V11A)
http://www.4shared.com/zip/PrW1TWHF/v10_kernel_60.html?
OR
You can flash cwm using adb , you need root rights .The best is when adbd is running in root mode (for eaxample kernel#60).
Download this :flash_image binary
then turn on usb debugging.
to flash cwm you need the following commands:
adb push CWMrecovery.img /data/local/tmp
(where cwmrecovery.img is the name of the cwm image file name.)
adb push flash_image /data/local/tmp
adb shell chmod 755 /data/local/tmp/flash_image
adb shell (you need # not $ for flashing , so if you got $ type su to get #)
cd /data/local/tmp
./flash_image /dev/block/mmcblk0p18 CWMrecovery.img
Dont forget to remove the install-recovery.sh file from /system/etc othervise it will install stock recovery at system start if it has not the stock recovery.
To revert the bootloader you need to flash NON-HLOS.bin"to "/dev/block/mmcblk0p1" and "emmc_appsboot.mbn" to "/dev/block/mmcblk0p7" from a previous version .
Utkanos' v11a version is here.
Utkanos' v71a version is here.
Credit goes to utkanos, mobilx and koush. I have also attached these files at the end of the post.
Also attached, is the original 7-inch stock recovery file, for users who may wish to return to stock and have not performed backup.
--> Plug your tablet into usb, launch a command line, and use "adb reboot bootloader"
--> Download the CWM Recovery image from the link that fits your device.
--> Place it into the adb/fastboot folder (I am assuming you have downloaded fastboot already from the link above, during the root procedure).
--> In the command line, navigate to that folder (use "cd <path>").
--> input the command "fastboot flash recovery <filename>".
--> Reboot into recovery mode (should be Power + Volume down).
--> You should now be in CWM Recovery, and can now attempt to perform a nandroid backup.
Also, in order to prevent a possible hang, you should:
--> Reboot the tablet into the Android OS;
--> Mount it through USB;
--> Go into the clockworkmod folder;
--> Create an empty file with no extension called ".hidenandroidprogress"
After a period of testing this will be submitted to the Koush's Rom Manager. Source code is also available herehere, linked from utkanos' post.
What works:
Nandroid backup/restore on internal sdcard
Battery stats wipe
Dalvik wipe
Cache wipe
etc.
What does not work so far:
USB mass storage
credits:
utkanos
Koush
Also, Benny3 has put together a CWM-flashable ROM package for the V55 tablet, including Joe's kernel #60 and a number of useful goodies. You can thank him and download the package from here.Here it is.
There is a new kernel version available. The new version is #60 and flashable from cwm recovery .
Changelog :
-Revert GPU overclock
-Revert change of system audio files (because of bootloops on some devices after installation #55)
-Increased system volume on kernel level
-Changed VMALLOC_RESERVE=0x19000000 to VMALLOC_RESERVE=0x10000000
-Added Apple Magicmouse HID support
-Added Microsoft HID support
-Changed cpu minimum freq 345MHz to 432 MHz to avoid the black screen effect (the screen does not wake up , you have to reset )
V55_kernel_60.zip Hope will work fine on v55.
V7_kernel_60.zip
V10_kernel_60.zip
It is a mmcblk device not mtdblock
dd if=/dev/block/mmcblk0p8 of=/sdcard/boot_backup.img
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery_backup.img
It is recommended that you skip these steps and proceed to flashing clockwork mod for your respective device from the start using fastboot, and from inside CWM install joe's kernel (or custom rom), which you can find below. Joe's kernels and rom already come with significant updates to stock Vodafone systems, and are pre-rooted.
We will use superboot to root. What does superboot do? It puts the SU binary and makes a 'insecure' kernel to be loaded temporarily on to the device through ADB remount. So it's only purpose is to make ROOT. After execution, you will still be on the stock kernel, only with root privileges.
This method is for the advanced users only who want to have root before we have a fully functional CWM running. With the CWM the root method will be easier.
IMPORTANT!
At this point we have no way to repair a broken device to a factory state. We can unroot and that is it. It is advisable do make dump of your rom before making any changes to the system. We are not responsible for any damage that can occur in the root process and after that.
What will you need?
--> Download Fastboot+Superboot.img from here.
--> Install ADB through the SDK, download from here, although the ADB included with the ZTE drivers should also work.
--> Install the ZTE drivers, you can find them here, although they should already be included on your device when first mounting it.
--> don't forget to enable USB debugging in the tablet's application settings.
--> Put the fastboot.exe and the superboot.img files in the working directory you will be running adb from (Default should be at "C:\Program Files\ZTE Handset USB Driver".
--> Open a Command Line (Start Menu > Run > CMD) and navigate to the working directory. (Use "cd C:\Program Files\ZTE Handset USB Driver" or alter the path accordingly).
--> Write the following commands withing the command line:
--> adb reboot bootloader
--> fastboot boot superboot.img
--> The device should now boot with the Superuser.apk installed and SU in the /system/xbin/su, as well as allowing you adb root commands. Now run the following:
--> adb remount
--> adb shell
--> ln -s /system/xbin/su /system/bin/su
--> You can now exit the ADB shell and reboot the tablet.
--> Install busybox from the market and check the SU binary version with the Superuser.apk - try to update. If it succeed you are done.
Credits:
sangemaru
utkanos
PaulOBrien from modaco and his superboot solution