Star N8000, firmware and rom

here the official post of STAR N8000
it is a different phone with different firmware of haipai Noble i9220 e Star I9220 dpad. For this phone you must see right topic.

here a photo of Star N8000
the led is on the right of camera.

For flashing with FlashtooL see the good guide of Bruno martins:
http://bm-smartphone-reviews.blogspot.it/2012/05/mt6575-flashing-tutorial.html#comment-form

Firmware Stock
Latest (05.07.2012) official firmware for N8000 - 20120705_e1808_v75_jbl1l THANKS TO Kyrie1965
http://narod.ru/disk/57204199001.bb08022cc3658b67af84bc83bd330b0c/20120705_e1808_v75_jbl1.zip.html

Changes (compared to 0612):
- enhanced KD50M4-51NB-A4 display driver
- TV bug fixes
- RX—392A display driver bug fixes
- OmniVision OV5640 sensor bug fixes
- RX—323A display driver bug fixes

12 June Firmware with recovery stock Kernel 12 June
http://www.mediafire.com/?yoirinkclioiq

CWM Recovery
http://www.mediafire.com/download.php?htx4lkktne1jmzg

Root
http://www.mediafire.com/download.php?dlzzsq7fb1zlzzb
Root by CWM with superuser
http://www.mediafire.com/download.php?m9ghiy5ml24miud
Upgrade Root by CWM with SuperSu 0.94
http://www.mediafire.com/download.php?j4aewykt9e8u5b3

Repartiton FIx
2gb
http://www.mediafire.com/download.php?1m6bprmy7o9hd37
2,5gb
http://www.mediafire.com/download.php?95kfu55t3x36t20

CUSTOM ROM
STAR N8000 custom ROM: Taiwan101_STAR-N8000_V.05 BY JOHNNY
https://rapidshare.com/files/1870830247/Taiwan101_STAR-N8000_V.05-1.zip

If after flashing, you have problems with your front camera or display, you must use SPMDT tool for flash new firmware and you must put the right settings for your device.
soon i make a videoguide.... meanwhile people send me the setting that you have used..
http://www.mediafire.com/download.php?1ycvu9ywv7vjnhv
UPDATE 20-07-2012

MT6575 Driver Installtion Step by Step

I have experienced so much frustration installing the drivers for the first time, in order to use it with SP-Flash Tool and SP-MDT Tool.
It took a lot of research, trial and error, and hair-pulling activities before I was able to finally do it.

So to help our newbies out there, I hope this guide may help you.

This is for you if your problem is:

• The Flasht Tool or SP-MDT Tool cannot detect your phone.
• When you plug your phone, you hear it connecting, and disconnecting immediately in Windows.
• Your phone goes into connecting and disconnecting state.
• Your phone can be flashed via the SP-Flash Tool, but not through the SP-MDT Tool

The Basics:
There are actually 2 different types of drivers for this phone:
1. The USB driver
- You need to have this installed in order for you to use it via ADB Devices, USB Debugging mode, TPSparky Root tool, etc.
- This driver is needed for activities where the phone remains turned on.
- The component of this driver will appear as MT65xx ADB Interface device
2. The Preloader driver
- You need to have this installed in order for you to use it with the Flashing Tool and SP-MDT Tool
- This driver is needed for activities where the phone is turned off.
- There are two components of this driver: The Meditatek USB VCOM driver and the Mediatek USB DA VCOM driver

The Tools:
There are two types of tools you can use for updating this phone:
1. The SP-Flash Tool
- This is easier to use as long as you have correctly installed the device drivers
- This is recommended for flashing only a few parts of the ROM, like for example, changing only the recovery, uboot, and boot images.
2. The SP-MDT Tool
- This is an advanced tool which allows you to set the display drivers
- The installation of the driver is a little more complex for this tool in order for your phone to be detected
- If you are able to successfully flash using the SP-Flashtool, but then your display is black, wrong color, twisted, etc, this tool is what you need.


There are a lot of people who are able to successfully install drivers and flash using the SP-Flashtool,
but to no success when using the SP-MDT tool.
In my experience, once I got to make the SP-MDT tool work, I had no use for SP-Flashtool anymore.


The Procedure
First of all, if you have installed the drivers already, and think it doesn't work, I recommend to clear out all
Android drivers you have installed using the USB Deview tool.
Delete all those drivers there that starts with MT.
Also delete any other drivers you might have installed for your old or other Android Devices.

ADB Interface Device

1. Turn your phone on and switch on the USB Debuggin mode under Settings>Developer Options.
2. Plug your phone to your computer
3. On the Hardware Update Wizard, select Install from a specific list or specific location (Advanced) option. Click Next.
4. Choose Don't search. I will choose the driver to install option. Click Next.
5. On the Hardware Type screen, select Show All Devices then click Next. (Some of you may not see this screen)
6. Click the Have Disk... button.
7. On the pop-up, click the Browse button and look for the android_winusb.inf driver in your hard drive (link below).
   Open it then Click OK.
8. Click the Next button and wait for Windows to install the driver.
9. You may be notified by windows about failure for driver verification, just select Continue Anyway
10. Once done, it should successfully install the driver.
11. Check if you phone can be detected now via the ADB Devices.

You can now use the TPSparky root tool to root your phone and install SuperUser.


USB VCOM and USB DA VCOM drivers

• Launch your Device Manager and Expand the Ports (COM & LPT) section.
• Resize the screen ofyour Device Manager in a way that you see the Ports section without having to scroll down the window.
• Make this window always visible. Do not minimize it.

PART 1

1. Turn off your phone and remove the battery.
2. Plug your phone into your PC and wait for it to be detected.
3. Windows should automatically bring up the Hardware Update Wizard.
   If it did not, that means you have not totally deleted the old drivers using the USB Deview tool.
4. On the Hardware Update Wizard, select Install from a specific list or specific location (Advanced) option. Click Next.
5. Choose Don't search. I will choose the driver to install option. Click Next.
6. On the Hardware Type screen, select Show All Devices then click Next. (Some may not see this screen)
7. Click the Have Disk... button.
8. On the pop-up, click the Browse button and look for the driver in your hard drive. Open it then Click OK.
9. Click the Next button and wait for Windows to install the driver.
10. You may be notified by windows about failure for driver verification, just select Continue Anyway
11. Once done, it should successfully install the driver.
12. The device manager should refresh and you should see the driver in the Ports section.
    But then you will notice it will disappear, and you will hear the USB disconnected sound right away. This is alright.

PART 2

1. Disconnect your phone from USB
2. Insert the battery back
3. Plug your phone into the computer again.
4. You should be prompted for the drivers again.
5. Follow the same steps above and use the same driver file.
6. Once installed, the phone will disappear from Device Manager again. That is alright. Do not worry.

After Parts 1 and 2 above, you should have been able to install both the USB VCOM and USB DA VCOM drivers.
You should now be able to flash using both of the flash tools.


SP-Flashtool can detect it but not SP-MDT tool
In order for SP-MDT tool to work, your driver should be installed between COM1 and COM16.
If not, then SP-MDT cannot flash your phone.

To solve it, you must force assign the COM port for your phone.
These steps are a little tricky so you must have quick hands.

1. Turn off your phone and disconnect from your computer
2. Remove battery for a few seconds, then put it back. Don't turn on.
3. On your device manager, focus your eyes on the Ports section
4. Connect your phone to the USB.
5. The device manager shall refresh and you should see your phone under the Ports section with the COM# in parenthesis (ex: COM8).
   If the COM# of your phone is COM17 and up, then we have to change it.
   Your eyes should be quick because this will disappear in a few seconds.
6. Disconnect again the phone from USB.
7. Remove battery again, then put it back.
8. Now, position your mouse over the part where you saw your phone in the Ports section.
9. Connect your phone to the USB.
10. When the Device Manager refreshes and shows your devices, immediately double click it before it disappears again.
11. The properties of the device should now pop-up.
12. Click the Port Setttings tab and click the Advanced.. button.
13. On the bottom of the new window is a COM Port Number drop-down menu, showing the current port # assigned to your phone.
14. Click the drop-down and select any available COM ports between COM1 and COM16. (I used COM8 with mine).
15. Click OK, then OK again.
16. Disconnect and Reconnect your phone again and make sure that device manager already show it under the COM# you assigned.
17. Your device should now be detected by the SP-MDT Tool.

This method is rather troublesome. If your SP-Flash Tool is already working, then stick with it. It is not sensitive to the COM# port number.
If you just want to set the correct drivers, simply open the scatter file of the ROM you want to flash with SP-MDT Tool, set the drivers, then exit SP-MDT Tool.
What it does is it saves that setting somehow in the uboot of the ROM.
Then open SP-Flashtool, open the scatter file of the same ROM you set with MDT earlier, flash the uboot.bin.
It should flash the uboot with the proper driver setting you made in SP-MDT tool.


If this steps have helped you, I will really appreciate if you thank me using the Thanks button, before just replying to my post and saying thanks.


*********************
android_winusb.inf driver.

Hi johnnysnavely,

Here is the steps that i followed,
1) open the "Multiport Flash Tool" click on -> File -> Open Download Agent File, a file browser window will open, select "MTK_AllInOne_DA.bin" file. ->refer to attached SP_MPD1.jpg
2) click on Scatter File Button, a file browser window will open, go to JUNE ROM Folder and select "MT6575_Android_scatter_emmc.txt" file -> refer to attached SP_MPD2.jpg
3) click on the button with "????????" on the right hand side of the screen, a "Choose LCD and Sensor" would pop-up, click on unlock , choose
0v5640_yuv (back camera), hi704_yuv (front camera), RX_50RM_392A (display) on the 3 dropdown box. -> refer to attached SP_MPD3.jpg
4) choose "Preloader --> DA" on the bottom right of the screen.

you have to check all com ports on the pc/laptop, you can remove and uninstall/install the deivces/drivers, please check the below site ->"www"

aximusers.com/forum/threads/7507-Removing-hidden-Com-ports-on-PC-High-com-numbers.-> refer to attached ComPort.jpg
5)your Phone driver should be installed with 3-16 com ports, if not, you have uninstall other devices that are grey and installl the phone driver again with the phone plug into usb port. later unplug the phone after phone driver installation.

6) click on "startall" and plug the phone to the USB port.

Hope this helps

rom uploaded you can try

http://xdaforums.com/showpost.php?p=28701097&postcount=193

caviar44 said:

Thanks angelobiz for all your help.

I am a pure newbie

I tried to follow the tutorial about flasing but I do not know where to find the file MT6575_Android_scatter_emmc.txt !
Should I create it ?


caviar

Click to expand...

Click to collapse

Here it is.