[Q] Returning to stock [SOLVED]

Search This thread

redelmos

Member
Apr 11, 2014
11
3
I wanted to experiment a bit with rooting. I guess I wasn't extremely informed. Anyways, I used the Guru reset(I can't post outside links) , and I guess did not have the matching software. My touchscreen does not work, I tried to do the OTA update like suggested but after the restart to install the update it said the update failed. Now my Wi-Fi is stuck "turning on" so I can't try to run the update again. I don't know what to do, and I can't find it. I don't know what else to include so that you can help me but if you have questions I'll answer to the best of my knowledge.
 
Last edited:

nkk71

Inactive Recognized Developer / Contributor
May 26, 2010
8,741
7,571
53
Beirut
I wanted to experiment a bit with rooting. I guess I wasn't extremely informed. Anyways, I used the Guru reset(I can't post outside links) , and I guess did not have the matching software. My touchscreen does not work, I tried to do the OTA update like suggested but after the restart to install the update it said the update failed. Now my Wi-Fi is stuck "turning on" so I can't try to run the update again. I don't know what to do, and I can't find it. I don't know what else to include so that you can help me but if you have questions I'll answer to the best of my knowledge.

start by posting a "fastboot getvar all" (excluding IMEI and s/n)
 

redelmos

Member
Apr 11, 2014
11
3
start by posting a "fastboot getvar all" (excluding IMEI and s/n)

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT361W903656
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4179mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
 
Last edited:

nkk71

Inactive Recognized Developer / Contributor
May 26, 2010
8,741
7,571
53
Beirut
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) gencheckpt: 0

1- edit your post and remove IMEI (that shouldnt be shared publicly)

2- since you are S-On you need to relock your bootloader using fastboot oem lock then you can use this RUU.EXE:
RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2.exe

note that your bootloader will say RELOCKED not LOCKED, the only way to set it back to LOCKED is if you are S-Off. but the phone will be completely stock after the RUU, so unless you're selling the phone or going for warranty, then RELOCKED shouldnt matter.
 
  • Like
Reactions: redelmos

redelmos

Member
Apr 11, 2014
11
3
1- edit your post and remove IMEI (that shouldnt be shared publicly)

2- since you are S-On you need to relock your bootloader using fastboot oem lock then you can use this RUU.EXE:
RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2.exe

note that your bootloader will say RELOCKED not LOCKED, the only way to set it back to LOCKED is if you are S-Off. but the phone will be completely stock after the RUU, so unless you're selling the phone or going for warranty, then RELOCKED shouldnt matter.

It worked, Thank you! I've ran multiple RUU exes and I've tried some .zips but all of them were the wrong version I guess. I've been working on this for around 4 days now, and this is a huge load off my mind.
 

nkk71

Inactive Recognized Developer / Contributor
May 26, 2010
8,741
7,571
53
Beirut
It worked, Thank you! I've ran multiple RUU exes and I've tried some .zips but all of them were the wrong version I guess. I've been working on this for around 4 days now, and this is a huge load off my mind.

:cowboy:

if all is good now, can you also edit main thread title to include [SOLVED], thanks
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    (bootloader) version: 0.5
    (bootloader) version-bootloader: 1.56.0000
    (bootloader) version-baseband: 4T.24.3218.09
    (bootloader) version-misc: PVT SHIP S-ON
    (bootloader) product: m7_ul
    (bootloader) modelid: PN0712000
    (bootloader) cidnum: CWS__001
    (bootloader) gencheckpt: 0

    1- edit your post and remove IMEI (that shouldnt be shared publicly)

    2- since you are S-On you need to relock your bootloader using fastboot oem lock then you can use this RUU.EXE:
    RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2.exe

    note that your bootloader will say RELOCKED not LOCKED, the only way to set it back to LOCKED is if you are S-Off. but the phone will be completely stock after the RUU, so unless you're selling the phone or going for warranty, then RELOCKED shouldnt matter.