I tried a swap last night and it worked without any problems.
My primary CM9 nightly is now my secondary, and my secondary FOXHOUND PsychoMantis V2 is now primary
I tried a swap last night and it worked without any problems.
Two small quastions:
1. Any thoughts or opinions about change to ext4 filesystem?
2. In siyah 3.2 there will be great variability in selecting CPU frequencies, will we be able to to change voltage for the corresponding selected frequency?
Changelog for 3.2:
User selectable frequency table. Available frequencies are: (in MHz) 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800, 700, 600, 500, 400, 300, 200, 100, 50, 25. Default set is 1400, 1200, 1000, 800, 500, 200. You will be able to select 5-step(samsung default), 6-step(new SiyahKernel default), 7-step (new SiyahKernel default + 1500MHz), 8-step (old SiyahKernel Default), 9-step (old SiyahKernel Default + 1500MHz) or 18-step(all) in ExTweaks. If you want to have your own set you will be able to echo it to scaling_available_frequencies. The only limitation is that you won’t be able to delete 500, 800 and 1000MHz steps.
not released yet.
You can get them here http://www.gokhanmoral.com/
SGSII is already using ext4.
Siyah has supported that since the first few releases.
I got two SODs and a hang today,but none of them gave any rcu related messages in last_kmsg.One SOD in particular was pretty scary though,it hanged while I was asleep,my alarm didn't ring(Not that I gave a ****,I overslept 3 hours and loved it ) and was connected to the charger,so when I woke up it was really hot.It's still alive fortunately...
Still man,if you want I can test stuff,I just don't know if I could be of help.
yesterday i had one hang on scrolling in taptalk and i forgot to take the latest kmsg i dont have any sod every thing ok even i'm uving
edit: i found latest kmsg on /proc hope it help last_kmsg
dose any one try to make wipe data in 3.1.2 i want to try latest cm9
i'm scaring from wipe
Nope,your hang,as was my first SOD,are probably caused by undervolting,no rcu stuff in both.See,I'm undervolting too,and heavily I'd say.But bear in mind that,even if your highest frequency is tested for stability at a given voltage for say 30 minutes,it can still crash after continuous processing for hours.My first SOD was probably caused by that(and has happened again).Some app caused the CPU to "stick" at 1.4GHz for LONG time periods overnight,resulting in a SOD(Whole night on the charger,left it with 25% battery and found it with 34% ).I think such hanging can be caused when load skyrockets "unexpectedly" and your device isn't 100% stable with a certain frequency/voltage combo,but I could be wrong with this one as it's purely based on my powers of observation.
I tried a swap last night and it worked without any problems.
My primary CM9 nightly is now my secondary, and my secondary FOXHOUND PsychoMantis V2 is now primary
Hi guys,
i'm one of the guy that had bricked his gs2. i have the pleasure to tell you that samsung service fix my phone in warranty
so far, so good
Hi guys,
i'm one of the guy that had bricked his gs2. i have the pleasure to tell you that samsung service fix my phone in warranty
so far, so good
samsung service the best i have many time ago one problem whit my sgs 1 and samsung repair in 1 week in warranty and send me the devaice whit unlock bootloaders
do you know if they used jtag to fix it? because they have changed motherboard to me.Hi guys,
i'm one of the guy that had bricked his gs2. i have the pleasure to tell you that samsung service fix my phone in warranty
so far, so good
i don't know if you need an external sd for it, but you need enough storage to copy all stuff of the primary rom i think to another location. but swapping works just fine. but it does nothing different than what i described before for installing a zip to the second rom. should take even a little bit longer until you're finished this way.Then must be there something difference what causes that it does not work for me, but you. E.g. I don't have external SD... Maybe it is a criterion of swapping ROMs? What are your conditions? Free space, external SD, version of Siyah?
do you know if they used jtag to fix it? because they have changed motherboard to me.
What did you tell to samsung??just for curiozity...
Inviato dal mio GT-I9100 usando Tapatalk
What did you tell to samsung??just for curiozity...
Inviato dal mio GT-I9100 usando Tapatalk
Probably that some guy with a gun shot it for its money...Or that someone raped it maybe.
Seriously now,a "it just died" should suffice,they don't need to know more.