[RECOVERY] Safestrap Recovery v3.7x [05/15/2014 V3.73 - TWRP 2.7.0.0]

Search This thread
By:
Advanced…
J

john-ammu

Senior Member
Jul 29, 2013
53
2
i accidentally uninstalled safestrap recovery and data factory reset

IM NOT RESPONSIBLE FOR ANY THING DO AT YOUR OWN RISK ITS 100% WORKED ON MY DROID BIONIC

IF YOU HAVE UNINSTALL SAFESTRAP RECOVERY AND FACTORY DATA RESET NOW AFTER RED LOGO YOUR
DROID BIONIC SHOWS GRAYISH/ BLACK SCREEN RSD LITE DO NOT FLASHING SYSTEM.IMG 15/22 IT JUST KEEP
SENDING FOR A LONG TIME.

1 just remember download the official stock firmware that you have installed before custom rom ics / j.b
2 charge battery with external charger or use factory cable
3 extract stock frimware
4 copy and past it on fastboot/adb folder
Installation

Install drivers
Boot your Droid Bionic into AP Fastboot mode
Power off the device (by battery pull if necessary)
While powering up the device, hold the Volume Down button until the screen says “AP Fastboot”
Open a terminal window on your computer.
Extract the fastboot-images.zip and fastboot binary to the same folder.
Change directory “cd” to this folder within the terminal
Issue the following commands:

Windows
fastboot flash boot boot.img
fastboot flash system system.img
fastboot -w
fastboot reboot
Congratulations! You’ve restored your Motorola Droid Bionic.
 
Last edited:
Oggie7797

Oggie7797

Senior Member
Jan 10, 2014
1,068
641
26
Jordan, Arkansas
Mentor.37 said:
Anyway i can tell you that some days ago i built a versione without the splashscreen at boot time for several devices, xt875 included, if interested you can find it here.
Click to expand...
Click to collapse
Has anyone tried this? My mom runs cm11 on her bionic and she comments on the slow boot due to splash and my dad has one that is stock jb with xposed because god knows if he has a simple way into recovery he will nuke his phone and cause the Earth's poles to flip and end life as we know it (I'm not exaggerating) lol and I don't have the time to back stuff up and sbf if needed...


Sent from my XT894 using XDA Free mobile app
 
You must log in or register to reply here.

Similar threads

nitroglycerine33
[ROM] Eclipse v3.0 (6/5/12)
Replies
521
Views
144K
The Doctor04
The Doctor04
D
  • Locked
[ROM] [R3]BLURR3D V2.0 PBX MOTO Kernel (10/22/2011)
Replies
3K
Views
286K
W
whodat70003
dhacker29
[ROM][4.2.2][OFFICIAL] LiquidSmooth v2.2.1 - targa - 4|15|13
Replies
756
Views
98K
T
theistus
kennethpenn
[FXZ] Droid Bionic Stock 5.5.1_84_DBN-55
Replies
132
Views
107K
C
cyberkeeper1
Terror_1
[DEPRECIATED LIST] One Stop Shop
Replies
109
Views
188K
tucstwo
tucstwo

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 67
    Hashcode
    Hashcode
    SAFESTRAP v3.73 (2nd-System Bootstrap / Recovery)

    ATTENTION: I will be stopping official Safestrap support on 9/1/2014. For more information please see:
    https://plus.google.com/111109372727398356624/posts/AtoJ3xLj35b

    ** INSERT STANDARD DISCLAIMER: I'm not responsible for any damage you do to your phone using my tools. Always have a fastboot available for disaster recovery. **

    Download the APK Installer:
    Mirror 1: Goo.im
    Mirror 2: Crackflasher
    FOLLOW THESE INSTRUCTIONS: How to Safestrap
    [ DOUBLE-CHECK you have the "Targa" version ]

    NOTABLE TWRP-BASE CHANGES:
    • Key/button vibration in recovery and MANY more 2.7.0.0 updates
    • Screen saving in recovery. Can set the timeout under Advanced->Settings->Screen *Don't freak out of the screen is dark, try the power button.
    • SElinux support in recovery (1st boot won't take so long)
    • and much much more.. check the TWRP changelog here: http://www.teamw.in/project/twrp2

    DEVICE SPECIFIC SAFESTRAP CHANGES:
    • [05/15] (3.73) Bugfix for dual SD card UMS mounting and pull in TWRP changes
    • [04/14] (3.72) Mostly other device updates
    • [01/15] (3.71) Code cleanup
    • [01/15] (3.71) Minor hijack updates
    • [12/18] (3.70) Mount cleanup during hijack / debugging output
    • [12/18] (3.70) Splashscreen: Instant stock boot key (needs to be set for Moto OMAP4's still)
    • [11/13] (3.65) recovery init.rc cleanup
    • [11/13] (3.65) fix updater build for cm 10.1 and 10.2
    • [09/20] (3.60) Better handling for virtual images > 2gb
    • [09/20] (3.60) Much improved block device handling
    • [09/20] (3.60) Bugfix in script translation
    • [09/20] (3.60) hijack / init.rc tweaks
    • [09/20] (3.60) update to TWRP 2.6.3.0 base recovery
    • [09/06] (3.53) Fixed mass_storage in recovery (via Mount menu)
    • [09/06] (3.53) Added Webtop to partition backup list (optional)
    • [09/06] (3.53) New virtual systems created will be 640mb (got reset 600mb)
    • [09/06] (3.53) Fixed file selector when changing from internal to external storage (previously location wouldn't update)
    • [09/05] (3.52) added "Reboot to Recovery" in APK
    • [09/04] (3.51) Disabled screen blank while creating a rom-slot
    • [09/04] (3.51) Fixed openrecovery script processing for stock slot to re-inject hijack after .zip install (cmupdater on stock now works)
    • [08/30] (3.50) If running a new CM10.1/CM10.2 ROM (08/30 or later) you *should* be able to install Safestrap and update the recovery w/o having to go back to stock. If Safestrap shows "recovery not installed" while you're on a ROM-slot, then that ROM hasn't been updated and it won't work. Swap back to stock ROM and update Safestrap from there.
    • [08/30] (3.50) Worked on stock ROM flashing and *should* work with CM10.1/CM10.2 builds on or after 08/30 *WILL NOT WORK WITH OLDER ROMs.*
    • [08/30] (3.50) Battery meter is back
    • [08/30] (3.50) Updated TWRP theme
    • [08/30] (3.50) Added partition sizes to ROM-slot screen when it's ACTIVE
    • [08/30] (3.50) Added "Check FS" function to ROM-slot screen when it's ACTIVE
    • [08/30] (3.50) Complete re-write against TWRP 2.6 base (up from version 2.2.2.1): TWRP changelog for reference
    • [12/29] (3.11) Allow use of custom updater-binary in .zip files for flashing on stock ROM (virtual slots still use prebuilt updater-binary in recovery).
    • [12/29] (3.11) BUGFIX: Fixed fake flash error at the end of a .zip install. (No real error, .zip installs fine)
    • [12/29] (3.10) Early support for booting custom ROMs on stock partitions.
    • [12/29] (3.10) Enable flashing to stock ROM *BE CAREFUL -- NEW FEATURE -- STILL TESTING*
      • After .zip installations, nandroid restore or system wipe on the stock ROM: the current Safestrap files are restored to the system partition (Doesn't include the APK in /data -- so if you're restoring an old backup, be sure to update the Safestrap APK)
      • During the Safestrap files restore a check is done to be sure there are minimal files on /system to re-enter Safestrap
    • [12/29] (3.10) New virtual system partitions will be 640mb (closer match to stock RAZR/D4)
    • [12/27] (3.07) Bugfix: missed some changes in Safestrap 3.06
    • [12/26] (3.06) Bugfix/Update for JB4.1 OTA for DroidRAZR (Non-JB devices can also use)
    • [10/17] (3.05) Fixed SD card / emmc sharing in recovery (UMS)
    • [10/17] (3.05) Fixed recovery installation/removal from ROM-slots
    • [10/14] Updated to v3.04 BETA.
    • [10/14] Recovery is now based off TWRP 2.2.2.1 (fully featured touch-based recovery)
    • [10/14] Can create up to 4 Virtual ROM-slots to flash ROMs to and when "Active" ALL TWRP functions affect that ROM-slot (For example: Flashing .zips, Backup and Restore)
    • [10/14] Nearly instant swapping from ROM to ROM
    • [10/14] User selectable data partition sizes during ROM slot creation: 1GB, 2GB or 3GB
    • [10/14] ROM slots are saved on the internal emmc space so that preinstall and webtop partitions are no longer used and shouldn't break OTAs.
    • [10/14] Charging in recovery
    • [10/14] Supports "Reboot Recovery" from Android OS

    Entry to recovery via Splashscreen on boot-up. The screen stays up for around 8-10 seconds and if you hit the menu button, it takes you to Safestrap Recovery.


    SPECIAL THANKS TO:

    • The entire TWRP team who has built an AMAZING recovery system.
    • The testers which have helped in past and present versions of Safestrap, knowing that it could mean they brick their devices.

    As always, let me know what you think!

    SCREENSHOTS (showing slightly older TWRP base)
    View
    11
    Hashcode
    Hashcode
    OP updated for Safestrap v3.11:

    Download the APK Installer Here for "BIONIC, RAZR/MAXX and DROID 4"
    md5sum: 546060f221487ed35cc2f023c7e5d0f1
    FOLLOW THESE INSTRUCTIONS: How to Safestrap
    [ DOUBLE-CHECK you have the BIONIC/RAZR/DROID4 VERSION ]

    CHANGES:
    • [12/29] (3.11) Allow use of custom updater-binary in .zip files for flashing on stock ROM (virtual slots still use prebuilt updater-binary in recovery).
    • [12/29] (3.11) BUGFIX: Fixed fake flash error at the end of a .zip install. (No real error, .zip installs fine)
    • [12/29] (3.10) Early support for booting custom ROMs on stock partitions.
    • [12/29] (3.10) Enable flashing to stock ROM *BE CAREFUL -- NEW FEATURE -- STILL TESTING*
      • After .zip installations, nandroid restore or system wipe on the stock ROM: the current Safestrap files are restored to the system partition (Doesn't include the APK in /data -- so if you're restoring an old backup, be sure to update the Safestrap APK)
      • During the Safestrap files restore a check is done to be sure there are minimal files on /system to re-enter Safestrap
    • [12/29] (3.10) New virtual system partitions will be 640mb (closer match to stock RAZR/D4)
    • [12/27] (3.07) Bugfix: missed some changes in Safestrap 3.06
    • [12/26] (3.06) Bugfix/Update for JB4.1 OTA for DroidRAZR (Non-JB devices can also use)
    View
    9
    Hashcode
    Hashcode
    Updated OP for Safestrap v3.72 for Bionic

    Enjoy
    View
    8
    Hashcode
    Hashcode
    New version of Safestrap in the OP.

    VERY NEW VERSION OF SAFESTRAP WITH A LOT OF NEW CODE -- IT COULD CONTAIN BUGS WHICH WOULD NEED A FASTBOOT PROCESS TO RECOVER FROM. BE WARNED.

    BUG WARNING: Screen will blank out while building a new ROM-slot. Device won't respond to power button till the slot is done building. So be patient.

    ** INSERT STANDARD DISCLAIMER: I'm not responsible for any damage you do to your phone using my tools. Always have a fastboot available for disaster recovery. **

    ** I have more features planned, but I really wanted to get this updated release out. **

    SAFESTRAP 3.50 for Targa based on TWRP 2.6.1.0

    Download the APK Installer
    md5sum: a45be93c2cc3457bd5116d7ed1145b2a
    FOLLOW THESE INSTRUCTIONS: How to Safestrap
    [ DOUBLE-CHECK you have the "Targa" version ]

    NOTABLE TWRP-BASE CHANGES:
    • Screen saving in recovery. Can set the timeout under Advanced->Settings->Screen *Don't freak out of the screen is dark, try the power button.* Also, when the screen blanks while building a new ROM-slot, you can't wake it up till it's done. I'll fix that in the next version.
    • SElinux support in recovery (1st boot won't take so long)
    • and much much more.. check the TWRP changelog here: http://www.teamw.in/project/twrp2

    SAFESTRAP CHANGES:
    • [08/30] (3.50) If running a new CM10.1/CM10.2 ROM (08/30 or later) you *should* be able to install Safestrap and update the recovery w/o having to go back to stock. If Safestrap shows "recovery not installed" while you're on a ROM-slot, then that ROM hasn't been updated and it won't work. Swap back to stock ROM and update Safestrap from there.
    • [08/30] (3.50) Worked on stock ROM flashing and *should* work with CM10.1/CM10.2 builds on or after 08/30 *PROBABLY WILL NOT WORK WITH OLDER ROMs.*
    • [08/30] (3.50) Battery meter is back
    • [08/30] (3.50) Updated TWRP theme
    • [08/30] (3.50) Added partition sizes to ROM-slot screen when it's ACTIVE
    • [08/30] (3.50) Added "Check FS" function to ROM-slot screen when it's ACTIVE
    • [08/30] (3.50) Complete re-write against TWRP 2.6 base (up from version 2.2.2.1): TWRP changelog for reference
    View
    6
    Hashcode
    Hashcode
    UPDATED OP with a Bugfix version of Safestrap 3.51:

    Download the APK Installer
    md5sum: fb0effa5ef24951a1f9af699a3be6125
    FOLLOW THESE INSTRUCTIONS: How to Safestrap
    [ DOUBLE-CHECK you have the "Targa" version ]

    ** I have more features planned, but I really wanted to get this updated release out. **

    SAFESTRAP CHANGES:
    • [09/04] (3.51) Disabled screen blank while creating a rom-slot
    • [09/04] (3.51) Fixed openrecovery script processing for stock slot to re-inject hijack after .zip install (cmupdater on stock now works)
    View

New posts