Originally Posted by Unscrewed

Thanks for the great advice everyone, I really appreciate it.



I'm going to try this first, if it doesn't work, I'll follow samsamuel's advice.

I love this community!

May take couple of adjustment to get it good & best do a little at a time.
Will only work if is contact issue between plugs, if issue is broken contact leg or poor connector leg solder joint to mainboard then no benefit.
Post back if get it working ...

Originally Posted by Mister B

May take couple of adjustment to get it good & best do a little at a time.
Will only work if is contact issue between plugs, if issue is broken contact leg or poor connector leg solder joint to mainboard then no benefit.
Post back if get it working ...

Sure thing! I have one question, though. How do I correctly open up the device without damaging it (too much)?

Torx screwdriver and a thin credit card, there break down videos on youtube.

As above really, do your homework on stripdown & take a lot of care, back cover is easy if done right, plectrum is useful plastic tool for prying things apart or get hold of decent plastic opening tools, credit card can be used but too thick really.