It's been 3 days I've been up and down the forums, was on CM11, dirty flashed over the nebulas, ran into a few problems decided to go back and make it a clean flash, got 4.1.1, couldn't find one CASUAL that worked, went to 4.1.2, same problem, Yes i tried other cables, other computers, no difference.
Then updated 4.3 boot looped all kinds of problems tried Nand Erase All, didn't work, one way or another root66 stopped working. nothing would flash, it would all fail or if it did say it worked it just boot looped,
I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5
To work. So now I'm 4.3 Stock, with no root.
I want to get back to Nebulas,
I want to take this step by step because it's been a nightmare and I can't find any solutions to questions that have been asked before.
From what I research the next step is to flash:
sch-i605-16gb.pit file
+
KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5
But when I try I get sboot.bin fail. Got a tip somewhere to flash the just the PIT, this actually fixed it without needing to flash anything else.
Now I know I'm down grading so it's going to boot loop because nothing is compatible. Boot into recovery and do a wipe to fix that. I boot into the OS just to make sure I'm doing 4.1.2. Which it is. and enable usb debugging.
Now to root and bootloader.
I try the newest verison of CASUAL R991b-JenkinsBuild
I get Error Failed to confirm end of pit file transfer
Pit Upladoing Failed
ok, so I pull battery and reboot. Trying R515b because that's the one in the tutorial:
I get Pit upload successful
Error: Bootloader upload failed!
This corrupt the bootloader and it will fail the boot, taking a step back and reflashing the mc3 fixes this.
Then I try this tip "most times you will need to delete and uninstall the Samsung Mobile usb from your Computer's device manager while ur device is connected already in download mode. i failed several times to execute casual successfully until i did this and it worked like charm!"
That didn't do anything, Tried verision 535 same results.
Said screw that I'll just flash some Root and recovery. But it always fails to flash recovery.img or if i put in the PIT and say repartition it will fail after the NAND Write Start. I've tried
openrecovery-twrp-2.6.3.1-t0ltevzw.img
CF-Auto-Root-t0ltevzw-t0ltevzw-schi605.tar.md5
philz_touch_6.07.9-i605.tar.md5
and none work.
Any idea what I should do at this point? Everything fails the only thing I can do is flash 4.1.2 and 4.3 reliable.
Then updated 4.3 boot looped all kinds of problems tried Nand Erase All, didn't work, one way or another root66 stopped working. nothing would flash, it would all fail or if it did say it worked it just boot looped,
I605VRUEMJ9_I605VZWEMJ9_I605VRUEMJ9_HOME.tar.md5
To work. So now I'm 4.3 Stock, with no root.
I want to get back to Nebulas,
I want to take this step by step because it's been a nightmare and I can't find any solutions to questions that have been asked before.
From what I research the next step is to flash:
sch-i605-16gb.pit file
+
KIES_HOME_I605VRAMC3_I605VZWAMC3_1098177_REV04_user_low_ship.tar.md5
But when I try I get sboot.bin fail. Got a tip somewhere to flash the just the PIT, this actually fixed it without needing to flash anything else.
Now I know I'm down grading so it's going to boot loop because nothing is compatible. Boot into recovery and do a wipe to fix that. I boot into the OS just to make sure I'm doing 4.1.2. Which it is. and enable usb debugging.
Now to root and bootloader.
I try the newest verison of CASUAL R991b-JenkinsBuild
I get Error Failed to confirm end of pit file transfer
Pit Upladoing Failed
ok, so I pull battery and reboot. Trying R515b because that's the one in the tutorial:
I get Pit upload successful
Error: Bootloader upload failed!
This corrupt the bootloader and it will fail the boot, taking a step back and reflashing the mc3 fixes this.
Then I try this tip "most times you will need to delete and uninstall the Samsung Mobile usb from your Computer's device manager while ur device is connected already in download mode. i failed several times to execute casual successfully until i did this and it worked like charm!"
That didn't do anything, Tried verision 535 same results.
Said screw that I'll just flash some Root and recovery. But it always fails to flash recovery.img or if i put in the PIT and say repartition it will fail after the NAND Write Start. I've tried
openrecovery-twrp-2.6.3.1-t0ltevzw.img
CF-Auto-Root-t0ltevzw-t0ltevzw-schi605.tar.md5
philz_touch_6.07.9-i605.tar.md5
and none work.
Any idea what I should do at this point? Everything fails the only thing I can do is flash 4.1.2 and 4.3 reliable.