[GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Counter

Search This thread

fluffi444

Senior Member
Nov 19, 2012
1,600
932
Amazon Fire TV
Samsung Galaxy S9+
Meaning i will flash with KSA original firmware first and then flash with your rooted ones?

Thanks.

That's what I wrote... exactly! :D

These rooted files (made by diego and me) are not the complete FW... We flash only CRC (cache) and SYSTEM Files with this procedure... So it is needed to have the FULL FW (of the same Version as the rooted files) installed before...

Test your phone with the FULL KSA FW and see if it works - otherwise go back to FULL JED FW again.... And wait for the JB update! After its global release (up to now only for RUS available) there will be some other ways to root... Probably more easier...
 
Last edited:

elcaste

New member
Jan 15, 2013
1
0
Rooting

Request

PDA: LD4
PHONE: LD4
CSC: LF1 (CGU)

Model Number: GT-I9070
Android Version: 2.3.6
Baseband version: I9070UBLD4
Build Number: GINGERBREAD.UBLD4
 
Jan 14, 2013
7
2
GB
meettomy.site
Hi, I'm a newbie. I took me 3 nights to read all related forums before I decided to root my phone. I've never done this earlier. I just rooted my I9070 10 minutes ago. Know I got to find related post to find what to be done next like application, ROM, etc. Thank you guys for the guide.:laugh:
 

Shaaan

Inactive Recognized Developer
May 6, 2011
2,387
4,718
Mumbai
Hi, I'm a newbie. I took me 3 nights to read all related forums before I decided to root my phone. I've never done this earlier. I just rooted my I9070 10 minutes ago. Know I got to find related post to find what to be done next like application, ROM, etc. Thank you guys for the guide.:laugh:

This is how a user should be. Read, read and read..

Sent from my GT-I9070 using xda premium
 

earthspiritraven

Senior Member
Nov 8, 2012
53
9
Durango
Hey fluffi remember our conversation about the /system/bin vs. /system/xbin on jan 01/02?
Today I've gotten an error with the combination /system/bin + superuser in my i9070. Root explorer and link2sd were working perfectly until today, but I do not know exactly from when they stopped working. From jan 01 until now I've done the following:
- installed go launcher
- installed dictionary.com app
The latter I had to download in my tab, transfer to sd card and then installed to the phone (said it wasn't available in my country). I remember this being the last thing I did in root explorer. Maybe conflicting apps?
Anyway thought it was interesting to mention... waiting for jb. Maybe meantime re-root rom with su in /system/xbin

Sent from my Colortab-MID using xda app-developers app
 

fluffi444

Senior Member
Nov 19, 2012
1,600
932
Amazon Fire TV
Samsung Galaxy S9+
Hey fluffi remember our conversation about the /system/bin vs. /system/xbin on jan 01/02?
Today I've gotten an error with the combination /system/bin + superuser in my i9070. Root explorer and link2sd were working perfectly until today, but I do not know exactly from when they stopped working. From jan 01 until now I've done the following:
- installed go launcher
- installed dictionary.com app
The latter I had to download in my tab, transfer to sd card and then installed to the phone (said it wasn't available in my country). I remember this being the last thing I did in root explorer. Maybe conflicting apps?
Anyway thought it was interesting to mention... waiting for jb. Maybe meantime re-root rom with su in /system/xbin

Sent from my Colortab-MID using xda app-developers app

Very strange, isn't it? :)

Give it a try and copy the su to xbin. If your device is still rooted it will be easy to do.... I recommend to use SuperSU and its su binary....
http://xdaforums.com/showthread.php?t=1538053
 

emme1

Senior Member
Nov 10, 2012
110
22
R: [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Coun

I have a question...
The rooting method in the bin or xbin folder is compatible with Jb firmware there is another way to make the root?
________________________
Inviato dal mio☆Pimped☆GT-I9070P con Tapatalk 2
Se ti sono stato d'aiuto, non ringraziarmi, non mi interessa
 

shut_down

Senior Member
Sep 26, 2010
7,764
3,551
Belgrade
Samsung Galaxy S21 FE
Одг: [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Co

I have a question...
The rooting method in the bin or xbin folder is compatible with Jb firmware there is another way to make the root?
________________________
Inviato dal mio☆Pimped☆GT-I9070P con Tapatalk 2
Se ti sono stato d'aiuto, non ringraziarmi, non mi interessa

Why do you need any other root method for JB, it has easy way with stock recovery. Without increasing binary counter.

Послато са GT-I9070 користећи Тапаток 2
 

emme1

Senior Member
Nov 10, 2012
110
22
R: [GT-I9070] [ROOT] Rooting your Galaxy S Advance without increasing the Binary Coun

Yes but it will compatible with any others Jb firmware that will released from Samsung and nfc version too?
I know that with the method we speak in this thread any firm have his file to flash...
I like to learn

Sorry I think my English is very bad....

________________________
Inviato dal mio☆Pimped☆GT-I9070P con Tapatalk 2
Se ti sono stato d'aiuto, non ringraziarmi, non mi interessa
 

fluffi444

Senior Member
Nov 19, 2012
1,600
932
Amazon Fire TV
Samsung Galaxy S9+
  • Like
Reactions: emme1

Top Liked Posts

  • There are no posts matching your filters.
  • 87
    DISCLAIMER:


    I'm NOT responsible for any damage you cause to your phone.
    Be sure to follow the steps correctly.



    REQUIREMENTS:
    • Windows

    • Samsung KIES and all drivers installed.

    • ODIN for flashing the firmware.



    HOW TO ROOT:
    1. Download the Pre-Rooted firmware that matches the firmware your using.


    2. Extract the RAR file, you will end up with a folder with two files in it.
      SYSTEM_YOURFIRMWARE.tar.md5 and CSC_YOURFIRMWARE.tar.md5


    3. Close any KIES application that might be open.


    4. Open ODIN.


    5. Select the file SYSTEM_YOURFIRMWARE.tar.md5 as PDA.


    6. Select the file CSC_YOURFIRMWARE.tar.md5 as CSC.


    7. Verify that ONLY "AUTO REBOOT" and "F. RESET TIME" are selected.
      Do NOT select "Repartition"


    8. Boot your phone in "DOWNLOAD MODE" by holding POWER + HOME + VOL. DOWN


    9. Plug your phone usb cable to your computer.
      If you've never connected your phone to your computer in download mode you'll have to wait for it to install the drivers


    10. Click the "START" button and wait for it to finish.
      Do NOT unplug the usb cable before ODIN finishes its job.


      If you did everything correctly, after a few minutes, ODIN will show the message "PASS"
      Then you can remove the usb cable.
      Your device will reboot in Recovery Mode and will finish the installation.
      When it finishes, it will reboot and start the Android System.



    11. Now, go to the "Google Play Store" and Install the app "Super SU" (or "Superuser").





    That's it! :good:
    Now, enjoy your rooted Galaxy S Advance! :cool:
    You can go back to Download Mode to check that your Binary Counter hasn't increased.



    DONATIONS:
    Consider making a donation,
    It helps support developers so they can keep doing a great job!
    Donate via Paypal :good:
    38
    GT-I9070 Rooted Firmwares:


    REGION: ARO (Argentina) | PDA: I9070UBLD1 | CSC: I9070UVOLD1
    DOWNLOAD

    REGION: AUT (Switzerland) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
    DOWNLOAD

    REGION: CHL (Claro Chile) | PDA: I9070UBLD4 | CSC: I9070CHLLE3
    DOWNLOAD

    REGION: CHO (Chile) | PDA: I9070UBLD4 | CSC: I9070CHOLE1
    DOWNLOAD

    REGION: CNX (Vodafone RO) | PDA: I9070XXLF4 | CSC: I9070CNXLC1
    DOWNLOAD

    REGION: COA (Cosmote Romania) | PDA: I9070XXLD1 | CSC: I9070OXFLC2
    DOWNLOAD

    REGION: DBT (Germany) | PDA: I9070XXLD1 | CSC: I9070DBTLC1
    DOWNLOAD

    REGION: EUR (Greece) | PDA: I9070XXLD3 | CSC: I9070XXLD4
    DOWNLOAD

    REGION: HUI (H3G Italy) | PDA: I9070NELH2 | CSC: I9070HUILH2
    DOWNLOAD

    REGION: INU (India) | PDA: I9070DDLJ1 | CSC: I9070DDLJ1
    DOWNLOAD

    REGION: INU (India) | PDA: I9070DDLI1 | CSC: I9070DDLD4
    DOWNLOAD

    REGION: ITV (Italy) | PDA: I9070XXLD3 | CSC: I9070ITVLD1
    DOWNLOAD

    REGION: LUX (Luxemburg) | PDA: I9070XXLD1 | CSC: I9070LUXLC1
    DOWNLOAD

    REGION: NEE (Nordic Countries) | PDA: I9070XXLD1 | CSC: I9070OXXLD1
    DOWNLOAD

    REGION: OMN (Vodafone IT) | PDA: I9070BULE2 | CSC: I9070OMNLE1
    DOWNLOAD

    REGION: OXA (Open Europe) | PDA: I9070XXLD1 | CSC: I9070OXALD1
    DOWNLOAD

    REGION: OXX | PDA: I9070XXLE2 | CSC: I9070OXXLD4
    DOWNLOAD

    REGION: PRT (Play PL) | PDA: I9070XXLF4 | CSC: I9070PRTLF1
    DOWNLOAD

    REGION: SWC (Swisscom CH) | PDA: I9070BULE2 | CSC: I9070SWCLC1
    DOWNLOAD

    REGION: TCE (Mexico) | PDA: I9070UBLD1 | CSC: I9070TCELC1
    DOWNLOAD

    REGION: TCL (Vodafone PT) | PDA: I9070XXLE2 | CSC: I9070TCLLE1
    DOWNLOAD

    REGION: TRA (Croatia) | PDA: I9070XXLD3 | CSC: I9070OXFLE1
    DOWNLOAD

    REGION: TTT (Trinidad and Tobago) | PDA: I9070UBLD1 | CSC: I9070UUBLC1
    DOWNLOAD

    REGION: UFN (Movistar AR) | PDA: I9070VSLD1 | CSC: I9070TFGLD1
    DOWNLOAD

    REGION: XEO (Poland) | PDA: I9070XXLD1 | CSC: I9070XXLD1
    DOWNLOAD

    REGION: XME (Malaysia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: XSE (Indonesia) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: XTC (Sun Philippines) | PDA: I9070DXLD1 | CSC: I9070OLBLD1
    DOWNLOAD

    REGION: ZTM (TIM Brasil) | PDA: I9070VJLD1 | CSC: I9070ZTMLD1
    DOWNLOAD










    Requests Suspended till JB ROM is released!

    root your phone before making the ota update and the root will remain.

    do not use kies to update the phone.
    17
    GT-I9070P (NFC Version) Rooted Firmwares:



    REGION: ATO (Open Austria) | PDA: I9070PXXLD4 | CSC: I9070PATOLE1
    DOWNLOAD

    REGION: DBT (Germany) | PDA: I9070PXXLD2 | CSC: I9070PDBTLD2
    DOWNLOAD

    REGION: SEB (Baltic) | PDA: I9070PXXLD4 | CSC: I9070PSEBLD1
    DOWNLOAD

    REGION: TIM (TIM Italy) | PDA: I9070PAILE1 | CSC: I9070PTIMLD1
    DOWNLOAD

    REGION: TMU (T-Mobile UK) | PDA: I9070PBVLF1 | CSC: I9070PTMULE1
    DOWNLOAD

    REGION: TMZ (T-Mobile CZ) | PDA: I9070PBOLE2 | CSC: I9070PTMZLE2
    DOWNLOAD

    REGION: TPL (T-Mobile PL) | PDA: I9070PBOLE2 | CSC: I9070PTPLLE3
    DOWNLOAD

    REGION: VDH (Hungary) | PDA: I9070PBXXLE1 | CSC: I9070PVDHLE1
    DOWNLOAD


    8
    I did root more firmwares,
    I just need some time to upload them.
    I'll upload them tonight.
    7
    okay guys,
    now I have 10 requests for the I9070 and 7 for the I9070P (that's around 5gb for me to download and then upload)
    but I'll start uploading them today

    Code:
    I9070
    1.  XSE DXLD1 LBLD1
    2.  EUR XXLD3
    3.  CNX XXLF4 CNXLC1
    4.  CHO UBLD1 CHOLD4
    5.  XTC DXLD1 OLBLD1
    6.  TRA XXLD3
    7.  XME DXLD1 OLBLD1
    8.  INU DDLJ1 ODDLJ1
    9.  PRT XXLF4 PRTLF1
    10. TCE UBLD1
    
    + 7 more I9070P firmwares

    please wait for me to upload these before making more requests



    Alright. Thanks so much.

    Certo, muito obrigado.:laugh:

    CHO reuploaded. please test the new link.