Yes sir.
hTc Evo [3D]
flashed fine after renaming, not touching the hboot unless its eng.
radios etc working so far
i know this is a dumb question but ill ask anyway..... flashing hBoot 1.50.0000 will kill s-off, correct?
i know this is a dumb question but ill ask anyway..... flashing hBoot 1.50.0000 will kill s-off, correct?
realized I wasn't clear, I edited the post
I flashed the "firmware minus hboot"
Update Zips
These must be flashed through the Recovery.
Note About Mods: Since this update is Android 2.3.4, while the old one was 2.3.3, all of the framework mods will need to be remade for this version. Using any of the old ones will cause issues and could make the ROM unstable.Completely Stock 2.08.651.2 ROM - As is from using the OTA update
Shooter_2.08.651.2_odexed_rooted-signed.zip (MD5: 662790FC8DAF4B86CAFD27AE29E02CFC)
Shooter_2.08.651.2_deodexed_rooted-signed.zip (MD5: 77D088F46CC37BF2C2CE9227CED4AC94)Stock 2.08.651.2 With HTC/Sprint Spyware Removed
[ROM] Stock 2.08.651.2 With HTC/Sprint Spyware Removed
Firmware
These must be flashed through fastboot/hboot.
Rmk40 from the Sensation side has a thread containing info about the different partitions here. At the moment it looks like the radio, rcdata and RPM partitions are the only ones of use to us, but you should be fine if you decide to update everything else as well. Also, if you need an easy way to check MD5 sums you can find a windoze tool for it here(Thx riggsAndroid!).Full 2.08.651.2 Firmware Zip Extracted From The RUU
This is mainly for devs but it can also be used to restore your phone if needed. Flashing it will restore your phone to a completely stock state and will wipe everything!
PG86IMG_2.08.651.2.zip (MD5: 29F1698BCBF478A7297703D812718D35)All 2.08.651.2 Firmware Minus hBoot
PG86IMG_2.08.651.2_firmware_nohboot.zip (MD5: BCEA75347F8194EB1C10B2711E98A225)
hBoot 1.50.0000
PG86IMG_hboot_1.50.0000.zip (MD5: 2952A5405CB542533C68D9A13B8F0958)
All of the PG86IMGs below are included in PG86IMG_2.08.651.2_firmware_nohboot.zip.Radio & PRI Updates Radio 0.97.10.0808 PRI 1.24_003
PG86IMG_radio_pri.zip (MD5: E28414AAC6F91CE9D7B3615B2999AD3A)
RPM Possible fix for Black SOD
PG86IMG_rpm.zip (MD5: DE69396C8922FAD3AC82E5F836EE95FB)
SBL Secure/Secondary Bootloader?
PG86IMG_sbl.zip (MD5: 5604349AD611241CF1AC152FD3B0DE45)
TZ Trusted Zone - Not sure of it's purpose
PG86IMG_tz.zip (MD5: 75749FBCCE1331A5A85D2A154E15B276)
PG2F2_SPCUSTOM - No idea what it is
PG86IMG_pg2f2_spcustom.zip (MD5: 7A7DE8659A0771919A14B0C299CA18CC)
OK, so I'm on the OTA prior to this one (the latest as of yesterday) and I have s-off and am rooted. I want to stay stock + s-off + root but I want the goodies in the latest OTA, so which of these should I take? I just want to update the phone as if I had taken the OTA but keep root and s-off. It's not clear to me which files I should take and in which order from the OP. A simple instruction set like (1) wipe dalvik, (2) put PG...zip on the root, (3) reboot, etc. That'd help me a lot. There are so many files in the OP though that I don't know which I should fool with.
Original post can be found here.OK, no takers so I'll answer myself. Not my first rodeo as I about wore out my power and down buttons installing Deck ROM's on my Evo 4G. I took a closer look at the files in the OP and it became clearer since I've done this sort of thing many times. So... for anyone on stock rooted OTA who wants to just update, here's what I did. Note these instructions are for TWRP recovery. Works, s-off and root confirmed after the update:
(1) Download Shooter_2.08.651.2_odexed_rooted-signed.zip and PG86IMG_2.08.651.2_firmware_nohboot.zip from OP.
(2) Put Shooter_2.08.651.2_odexed_rooted-signed.zip on the SD card root.
(3) Power down. Pull battery if you run fastboot.
(4) Hold power and down volume to enter bootloader.
(5) Select "Recovery" and then go to the "Wipe" menu and wipe the Dalvik Cache.
(6) Back to the main Recovery menu and choose the option to install a ZIP.
(6) Select Shooter_2.08.651.2_odexed_rooted-signed.zip from the list of files and then confirm.
(7) BE PATIENT. It's a big file and you could see nothing happen for a few minutes.
(8) Process should eventually complete. You can go back in the recovery menu and reboot. Once successfully rebooted, if you want to update the radios, PRI, etc., continue below.
(9) To update the radios, PRI, etc., rename PG86IMG_2.08.651.2_firmware_nohboot.zip to PG86IMG.zip and put it on the root of the SD card.
(10) Once again, use power and volume down to boot to the bootloader. This time, it should find PG86IMG.zip automatically and will prompt you to update. Say yes and let it go.
(11) When the update is complete, choose the option to reboot.
(12) Remember to remove the PG86IMG.zip file from the root.
Mike