Titan LCD lights up but no Windows/text/pictures/

---

My Titan slipped, the screen broke. The screen broke but the phone was functioning.

I tried and replaced the digitizer.

Now, when I power up, nothing comes on the screen (no windows etc).

The phone boots fine, LCD is lit, I can hear the sounds during boot, phone is charging etc etc.

Anyone know what might be the issue ? Only thing that went wrong during repair was the volume control cable broke. I thought I cannot use the volume control but can that me the cause ?

Any help is appreciated.

Thanks

Not sure what is wrong with your phone, but wondering where you got a new digitizer?

Originally Posted by Woodway

Not sure what is wrong with your phone, but wondering where you got a new digitizer?

From eBay (China Shipped) for $35. Can get from US sellers for about $48.
Search "320885889472" on ebay

If the screen doesn't turn on at all check to see the bottom ribbon cable is not damaged and inserted correctly.
If it turns on but the touch doesn't register correctly check that the top ribbon cable is inserted right, and also that "ALL" of the pins in the connector are in place!!

Sent from my PI39100 using XDA Windows Phone 7 App

Thanks for the reply.

The screen turns on a but its all white light.
I don't see anything else like windows loading, logos etc. I checked both ribbons, it can hears the sounds while booting, basically cannot see anything related to software.

Originally Posted by IronMan1289

If the screen doesn't turn on at all check to see the bottom ribbon cable is not damaged and inserted correctly.
If it turns on but the touch doesn't register correctly check that the top ribbon cable is inserted right, and also that "ALL" of the pins in the connector are in place!!

Sent from my PI39100 using XDA Windows Phone 7 App

Did you also replace the LCD?
Have you tried a hard reset if it's a software issue?
Also with the original digitizer on did it boot up?

Sent from my PI39100 using XDA Windows Phone 7 App

Originally Posted by IronMan1289

Did you also replace the LCD?
Have you tried a hard reset if it's a software issue?
Also with the original digitizer on did it boot up?

Sent from my PI39100 using XDA Windows Phone 7 App

As I wrote the volume ribbon is broken and therefore, I can't hard reset it. I think that is the issue.

So if you are assuming it is in fact a software issue try connecting to Zune and restoring!

Sent from my PI39100 using XDA Windows Phone 7 App