Porting Android L (LPV81B) to tuna, help needed, ...
- Thread starter Carlos_Manuel
- Start date
The issues weren't with the drivers as I was working with los93sol as he was going through it so new preview images and some binaries aren't gonna magically make it work now.
As far as a few days, you got a few weeks. There is just new preview images coming and not official factory images yet.
You won't see those or source till at least one of the new nexus devices go to ship which is looking to be nov 9th
Sent from my LG-D851
I thought the major issue was that the preview images had a lot of graphics things hardcoded in? There have been SDK ports in the past obviously, but I wonder if that same thing would still be a problem. Either way, at this point an SDK port isn't worth it with source drop being close.
That was for the 1+1 and g3 mostly were we needed updated code for the qhd screen but on the gnex, we didn't have the egl3.1 binaries to match up with L.
The bigger problem on the gnex was no code to use to support the chipset so it was practically impossible and I know @los93sol tried every way we could think of to get around it
Sent from my LG-D851
The bigger problem on the gnex was no code to use to support the chipset so it was practically impossible and I know @los93sol tried every way we could think of to get around it
Sent from my LG-D851
The moment is arrived! http://www.xda-developers.com/andro...gn=Feed:+xda-developers/ShsH+(xda-developers)
Sent from my Galaxy Nexus using XDA Free mobile app
Sent from my Galaxy Nexus using XDA Free mobile app
Good luck with building with that and enjoy your kit Kat
Sent from my LG-D851
---------- Post added at 02:19 AM ---------- Previous post was at 02:12 AM ----------
Wait. It is happening
Sent from my LG-D851
Good luck with building with that and enjoy your kit Kat
Sent from my LG-D851
---------- Post added at 02:19 AM ---------- Previous post was at 02:12 AM ----------
Wait. It is happening
Sent from my LG-D851
I won't try to build Lollipop because I have lots of exams at University so I'll expect other builds
Sent from my Galaxy Nexus using XDA Free mobile app
After getting BT fixed or at least getting video graphics fixed from my new notebook running Ubuntu 14, then I'll start syncing LP sources (when the sources are completely pushed...)... :silly: :silly: :silly: :silly: :silly: :silly: :silly:
Last edited:
Are there any major changes in Lollipop that would break compatibility with our current kernel? (3.0.x)
I don't know. 3.0.** should work just fine...
Edit: for compiling, we need some changes to the kernel headers...
Last edited:
does the rom from download link boot??
Hi all!
-------------------------------------------------- EDIT --------------------------------------------
I have given up with porting this a long time ago.. I am waiting for sources.
Gladly @los93sol has made a lot of progress with Android L porting to Tuna.
So I am trying to port android L 'LPV81B' SDK system (Android L Preview armeabi-v7) to Tuna, but I need help. I've never ported ROMs to Samsung Galaxy Nexus and I need help from developers or users with knowledge of porting who are interested. so I leave here my port ROM of Andorid L SDK 'LPV81B'. It's not booting, it hangs on Google splash logo. Feel free to do (almost whatever) what you want with this port, I hope somebody gets it working on tuna.
What's already done:
Added Maguro and tuna vendor files (not toro/toro+) to system/lib/vendor, system/lib/, system/bin/
Added keylayout files to usr, including touchscreen file for mms_ts
Removed goldfish files from lib/hw/ replaced them with tuna's files and added missing *default.so files to lib/hw/
system/bin:
replaced vold, rild, sensorservice.. + added tuna's files (I don't remember what else)
system/lib/:
replaced egl folder, replaced libEGL.so, libgles*.so files, added tuna's files
system/etc/:
added tuna's files, replaced some files
build.prop edited to use tuna's files form lib/hw/, added board.platform to omap4
added tuna's boot files, init.rc, ueventd.rc and some other files are Android L's files, init file and sbin folder are tuna's
Kernel my built 3.0.72 AOSP tuna omap kernel:
https://android.googlesource.com/kernel/omap/+/android-omap-tuna-3.0-jb-mr2
etc.
_______________________
ROM have been made flashable with JustArchi's toolkit, mounting lines and unmounting lines, + other lines have been taken from my ROM Dreams KK.. to make this Android L ROM port flashable. - Thanks to @JustArchi
________________________
I really hope somebody gets this working
Here's SDK system dump with the ramdisk: http://xdaforums.com/showthread.php?p=53699397
Here's my ported Android L:
https://mega.co.nz/#!l1VmHLCa!Q9kj3Usps7lb8LQ7LqX4vmb4Pfblv5wnp5SCymrUhb0
dmesg log:
Code:<6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 3.0.72-gfb3c9ac (carlos@Carlos) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Tue Jun 24 08:29:38 EEST 2014 <4>[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache <4>[ 0.000000] Machine: Tuna <6>[ 0.000000] Reserving 16777216 bytes SDRAM for VRAM <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc <6>[ 0.000000] OMAP4460 ES1.1 <6>[ 0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000 <6>[ 0.000000] SMC: Allocated workspace of 0x300000 Bytes at (0xbfd00000) <7>[ 0.000000] On node 0 totalpages: 182272 <7>[ 0.000000] free_area_init_node: node 0, pgdat c082a780, node_mem_map c09da000 <7>[ 0.000000] Normal zone: 256 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 32512 pages, LIFO batch:7 <7>[ 0.000000] HighMem zone: 1792 pages used for memmap <7>[ 0.000000] HighMem zone: 147712 pages, LIFO batch:31 <6>[ 0.000000] PERCPU: Embedded 5 pages/cpu @c11e1000 s7520 r0 d12960 u32768 <7>[ 0.000000] pcpu-alloc: s7520 r0 d12960 u32768 alloc=8*4096 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 180224 <5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 mem=1G vmalloc=768M omap_wdt.timer_margin=30 no_console_suspend ...... .... <5>[ 4.130737] type=1403 audit(1403816123.789:2): policy loaded auid=4294967295 ses=4294967295 <4>[ 4.131378] SELinux: Loaded policy from /sepolicy <5>[ 4.141021] type=1404 audit(1403816123.804:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 <6>[ 4.843627] max17040 4-0036: online = 1 vcell = 4175000 soc = 100 status = 4 health = 1 temp = 380 charger status = 1 <3>[ 6.071197] init: /init.rc: 291: invalid command 'restorecon_recursive' <3>[ 6.075195] init: invalid line ueventd.rc line for 'subsystem' <3>[ 6.075256] init: invalid line ueventd.rc line for 'devname' <3>[ 6.205108] init: /dev/hw_random not found <6>[ 6.205261] keychord: using input dev tuna-gpio-keypad for fevent <7>[ 6.241729] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts <7>[ 6.242126] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 6.244201] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 6.244476] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 6.311859] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts <6>[ 6.322509] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null) <7>[ 6.322662] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr <6>[ 6.329345] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) <7>[ 6.329467] SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr <6>[ 6.752258] EXT4-fs (mmcblk0p11): recovery complete <6>[ 6.760589] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro <7>[ 6.760986] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr <6>[ 6.804168] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.0/by-name/cache <6>[ 6.823547] mms_ts 3-0048: fw version 0x65 already present <6>[ 6.824981] mms_ts 3-0048: Melfas MMS-series touch controller initialized <6>[ 6.959716] SELinux: Context u:object_r:system_library_file:s0 is not valid (left unmapped). <6>[ 7.065216] omap-rproc omap-rproc.1: Loaded BIOS image ducati-m3.bin, size 4515868 <6>[ 7.065582] omap-rproc omap-rproc.1: BIOS image version is 2 <6>[ 7.083343] e2fsck: e2fsck 1.42.9 (28-Dec-2013) <6>[ 7.083892] e2fsck: /dev/block/platform/omap/omap_hsmmc.0/by-name/cache: clean, 25/27648 files, 3619/110592 blocks <6>[ 7.088287] omap-iommu omap-iommu.0: iommu_get: ducati qos_request <6>[ 7.098297] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic <7>[ 7.098663] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr <4>[ 7.105407] omap_hwmod: ipu: failed to hardreset <6>[ 7.106201] omap-iommu omap-iommu.0: ducati: version 2.1 <6>[ 7.112304] omap-rproc omap-rproc.1: remote processor ipu is now up <6>[ 7.125701] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 7.125793] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 7.125854] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 7.125976] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 7.126068] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32 <6>[ 7.126312] rpmsg_client_sample rpmsg3: new channel: 0x400 <-> 0x32! <6>[ 7.126434] rpmsg_server_sample rpmsg1: incoming msg 1 (src: 0x32) <7>[ 7.126525] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.126647] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33 <6>[ 7.126770] rpmsg_client_sample rpmsg4: new channel: 0x401 <-> 0x33! <6>[ 7.126922] rpmsg_client_sample rpmsg3: incoming msg 1 (src: 0x32) <7>[ 7.127014] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.127105] rpmsg_server_sample rpmsg1: incoming msg 2 (src: 0x32) <7>[ 7.127227] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.127349] rpmsg_client_sample rpmsg4: incoming msg 2 (src: 0x33) <7>[ 7.127410] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.127532] rpmsg_client_sample rpmsg3: incoming msg 3 (src: 0x32) <7>[ 7.127593] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.127716] rpmsg_server_sample rpmsg1: incoming msg 3 (src: 0x32) <7>[ 7.127838] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.127899] rpmsg_client_sample rpmsg4: incoming msg 4 (src: 0x33) <7>[ 7.128021] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.128143] rpmsg_client_sample rpmsg3: incoming msg 5 (src: 0x32) <7>[ 7.128204] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.128326] rpmsg_server_sample rpmsg1: incoming msg 4 (src: 0x32) .... <6>[ 7.524139] EXT4-fs (mmcblk0p12): recovery complete <6>[ 7.527954] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro <7>[ 7.528198] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr <6>[ 7.569702] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.0/by-name/userdata <6>[ 7.638824] e2fsck: e2fsck 1.42.9 (28-Dec-2013) <6>[ 7.638977] e2fsck: /dev/block/platform/omap/omap_hsmmc.0/by-name/userdata: clean, 14792/887696 files, 3277276/3549691 blocks <6>[ 7.659973] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic <7>[ 7.660186] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr <6>[ 7.665710] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) <7>[ 7.799957] SELinux: 512 avtab hash slots, 1323 rules. <7>[ 7.800994] SELinux: 512 avtab hash slots, 1323 rules. <7>[ 7.801086] SELinux: 1 users, 2 roles, 288 types, 1 bools, 1 sens, 1024 cats <7>[ 7.801422] SELinux: 84 classes, 1323 rules <6>[ 7.955230] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c <6>[ 7.955596] rpmsg_omx rpmsg-omx1: new OMX connection srv channel: 1024 -> 60! <5>[ 8.182861] type=1403 audit(1403816127.835:4): policy loaded auid=4294967295 ses=4294967295 <4>[ 8.183563] SELinux: Loaded policy from /sepolicy <3>[ 8.212005] init: /dev/hw_random not found <3>[ 8.225158] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <5>[ 8.228179] type=1400 audit(1403816127.882:5): avc: denied { entrypoint } for pid=117 comm="init" path="/sbin/healthd" dev=rootfs ino=1530 scontext=u:r:healthd:s0 tcontext=u:object_r:rootfs:s0 tclass=file <3>[ 8.231079] healthd: wakealarm_init: timerfd_create failed <4>[ 8.232604] healthd: BatteryPresentPath not found <6>[ 8.232696] binder: 117:117 transaction failed 29189, size 0-0 <3>[ 8.274200] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64' <3>[ 8.277954] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery' <3>[ 8.282501] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}' <3>[ 8.282623] init: powerctl: cannot expand '${sys.powerctl}' <3>[ 8.282714] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}' <3>[ 8.282867] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes' <3>[ 8.282989] init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}' <3>[ 8.283142] init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd' <3>[ 8.285034] HDCP: failed to load keys <3>[ 8.288024] init: property 'persist.sys.tuna.off_mode' doesn't exist while expanding '${persist.sys.tuna.off_mode}' <3>[ 8.288177] init: cannot expand '${persist.sys.tuna.off_mode}' while writing to '/d/pm_debug/enable_off_mode' <3>[ 8.288330] init: property 'ril.modem.lte.powercontrol' doesn't exist while expanding '${ril.modem.lte.powercontrol}' <3>[ 8.288482] init: cannot expand '${ril.modem.lte.powercontrol}' while writing to '/sys/bus/usb/devices/1-1/power/control' <3>[ 8.288726] android_usb: already disabled <6>[ 8.292419] adb_open <6>[ 8.292541] adb_bind_config <7>[ 8.351928] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts <6>[ 8.428070] warning: `rild' uses 32-bit capabilities (legacy support in use) <6>[ 8.474822] request_suspend_state: wakeup (3->0) at 8459930422 (2014-06-26 20:55:28.136474609 UTC) <3>[ 8.476287] init: untracked pid 157 exited <3>[ 8.483306] init: sys_prop: permission denied uid:1001 name:net.rmnet1.dns1 <3>[ 8.483886] init: sys_prop: permission denied uid:1001 name:net.rmnet1.dns2 <3>[ 8.484161] init: sys_prop: permission denied uid:1001 name:net.rmnet1.gw <3>[ 8.484558] init: sys_prop: permission denied uid:1001 name:net.rmnet2.dns1 <3>[ 8.484802] init: sys_prop: permission denied uid:1001 name:net.rmnet2.dns2 <3>[ 8.485015] init: sys_prop: permission denied uid:1001 name:net.rmnet2.gw <6>[ 8.533813] [MODEM_IF] misc_open : umts_boot0 <6>[ 8.533935] omap_hsi omap_hsi.0: HSI clock is now 96000000 <6>[ 8.534423] omap_hsi omap_hsi.0: Entering RX wakeup in 3 wires mode (no CAWAKE) <6>[ 8.534576] [MODEM_IF] xmm6260_off() <6>[ 8.534637] [MODEM_IF] xmm6260_on() <6>[ 8.584960] android_work: sent uevent USB_STATE=CONNECTED <6>[ 8.589721] android_work: sent uevent USB_STATE=DISCONNECTED <6>[ 8.716918] android_work: sent uevent USB_STATE=CONNECTED <6>[ 8.718109] android_usb gadget: high speed config #1: android <6>[ 8.718444] android_work: sent uevent USB_STATE=CONFIGURED <6>[ 8.849334] [MODEM_IF] misc_release : umts_boot0 <3>[ 8.849548] omap_hsi omap_hsi.0: hsi_write_cancel ch 0 <3>[ 8.849731] omap_hsi omap_hsi.0: __hsi_write_cancel : -125 <3>[ 8.850067] omap_hsi omap_hsi.0: hsi_read_cancel ch 0 <3>[ 8.850250] omap_hsi omap_hsi.0: __hsi_read_cancel : -125 <3>[ 8.850585] omap_hsi omap_hsi.0: __hsi_write_cancel : -61 <3>[ 8.850769] omap_hsi omap_hsi.0: __hsi_read_cancel : -61 <6>[ 8.851196] [MODEM_IF] misc_open : umts_boot1 <6>[ 8.851409] omap_hsi omap_hsi.0: Entering RX wakeup in 4 wires mode <4>[ 11.463836] adbd (163): /proc/163/oom_adj is deprecated, please use /proc/163/oom_score_adj instead. <6>[ 12.762847] [MODEM_IF] misc_release : umts_boot1 <3>[ 12.763061] omap_hsi omap_hsi.0: hsi_write_cancel ch 0 <3>[ 12.763244] omap_hsi omap_hsi.0: __hsi_write_cancel : -61 <3>[ 12.763580] omap_hsi omap_hsi.0: hsi_read_cancel ch 0 <3>[ 12.763763] omap_hsi omap_hsi.0: __hsi_read_cancel : -125 <3>[ 12.764099] omap_hsi omap_hsi.0: __hsi_write_cancel : -61 <3>[ 12.764251] omap_hsi omap_hsi.0: __hsi_read_cancel : -61 <6>[ 12.766326] [MODEM_IF] misc_open : umts_ipc0 <6>[ 12.766723] omap_hsi omap_hsi.0: Entering RX wakeup in 4 wires mode <6>[ 12.767089] [MODEM_IF] misc_open : umts_rfs0 <6>[ 12.865051] [MODEM_IF] PA EVENT : reset =1, pa=1, cp_dump=0 <6>[ 12.865386] [MODEM_IF] umts_ipc0 state changed: ONLINE <3>[ 13.566467] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 13.594909] request_suspend_state: wakeup (0->0) at 13580017087 (2014-06-26 20:55:33.256561274 UTC) <3>[ 18.800872] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 18.831329] request_suspend_state: wakeup (0->0) at 18816466098 (2014-06-26 20:55:38.493010285 UTC) <3>[ 23.847930] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 23.867980] request_suspend_state: wakeup (0->0) at 23853097546 (2014-06-26 20:55:43.529641733 UTC) <3>[ 28.888519] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 28.936553] request_suspend_state: wakeup (0->0) at 28922431907 (2014-06-26 20:55:48.598976094 UTC) <3>[ 33.969146] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 33.984466] request_suspend_state: wakeup (0->0) at 33969387436 (2014-06-26 20:55:53.645931623 UTC) <3>[ 33.985656] init: untracked pid 212 exited <3>[ 38.999359] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 39.027862] request_suspend_state: wakeup (0->0) at 39012501632 (2014-06-26 20:55:58.689045819 UTC) <3>[ 43.043426] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 43.071044] request_suspend_state: wakeup (0->0) at 43056482398 (2014-06-26 20:56:02.733026585 UTC) <3>[ 48.096984] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 48.130218] request_suspend_state: wakeup (0->0) at 48115475675 (2014-06-26 20:56:07.792019862 UTC) <3>[ 48.131042] init: untracked pid 235 exited <3>[ 53.161621] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 53.167266] request_suspend_state: wakeup (0->0) at 53154605724 (2014-06-26 20:56:12.831149911 UTC) <6>[ 57.695526] max17040 4-0036: online = 1 vcell = 4193750 soc = 100 status = 4 health = 1 temp = 380 charger status = 1 <3>[ 58.200683] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 58.219146] request_suspend_state: wakeup (0->0) at 58202364779 (2014-06-26 20:56:17.878908966 UTC) <3>[ 63.238891] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 63.261810] request_suspend_state: wakeup (0->0) at 63246652032 (2014-06-26 20:56:22.923196219 UTC) <3>[ 68.279937] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 68.309631] request_suspend_state: wakeup (0->0) at 68294739707 (2014-06-26 20:56:27.971283894 UTC) <3>[ 73.325622] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 73.346221] request_suspend_state: wakeup (0->0) at 73331359760 (2014-06-26 20:56:33.007903947 UTC) <3>[ 78.378356] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 78.397674] request_suspend_state: wakeup (0->0) at 78382801800 (2014-06-26 20:56:38.059345987 UTC) <3>[ 83.425231] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 83.444305] request_suspend_state: wakeup (0->0) at 83429443660 (2014-06-26 20:56:43.105987847 UTC) <3>[ 88.461547] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 88.474304] request_suspend_state: wakeup (0->0) at 88459411788 (2014-06-26 20:56:48.135955975 UTC) <3>[ 93.503448] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 93.525085] request_suspend_state: wakeup (0->0) at 93510195024 (2014-06-26 20:56:53.186739211 UTC) <3>[ 98.543792] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 98.570678] request_suspend_state: wakeup (0->0) at 98555816902 (2014-06-26 20:56:58.232361089 UTC) <3>[ 103.589935] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 103.617095] request_suspend_state: wakeup (0->0) at 103602194329 (2014-06-26 20:57:03.278738516 UTC) <6>[ 108.052307] max17040 4-0036: online = 1 vcell = 4173750 soc = 100 status = 4 health = 1 temp = 380 charger status = 1 <3>[ 108.633270] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 108.651397] request_suspend_state: wakeup (0->0) at 108636644275 (2014-06-26 20:57:08.313188462 UTC) <3>[ 113.690826] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 113.711181] request_suspend_state: wakeup (0->0) at 113696326351 (2014-06-26 20:57:13.372870538 UTC) <3>[ 118.737731] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 118.752807] request_suspend_state: wakeup (0->0) at 118737953464 (2014-06-26 20:57:18.414497651 UTC) <3>[ 123.776916] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 123.804351] request_suspend_state: wakeup (0->0) at 123789523770 (2014-06-26 20:57:23.466067957 UTC) <3>[ 128.820800] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 128.834411] request_suspend_state: wakeup (0->0) at 128819544505 (2014-06-26 20:57:28.496088692 UTC) <3>[ 133.862792] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 133.881927] request_suspend_state: wakeup (0->0) at 133867059960 (2014-06-26 20:57:33.543604147 UTC) <3>[ 138.909484] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 138.929931] request_suspend_state: wakeup (0->0) at 138915153950 (2014-06-26 20:57:38.591698137 UTC) <3>[ 143.945800] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 143.959167] request_suspend_state: wakeup (0->0) at 143944311243 (2014-06-26 20:57:43.620855430 UTC) <3>[ 148.985076] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 149.007598] request_suspend_state: wakeup (0->0) at 148992737246 (2014-06-26 20:57:48.669281433 UTC) <3>[ 154.034515] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 154.055023] request_suspend_state: wakeup (0->0) at 154040197721 (2014-06-26 20:57:53.716711401 UTC) <3>[ 159.077636] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 159.089447] max17040 4-0036: online = 1 vcell = 4171250 soc = 100 status = 4 health = 1 temp = 380 charger status = 1 <6>[ 159.097839] request_suspend_state: wakeup (0->0) at 159082977740 (2014-06-26 20:57:58.759521927 UTC) <3>[ 164.117767] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 164.133422] request_suspend_state: wakeup (0->0) at 164118566298 (2014-06-26 20:58:03.795110485 UTC) <3>[ 169.152801] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 169.173797] request_suspend_state: wakeup (0->0) at 169158892589 (2014-06-26 20:58:08.835436776 UTC) <3>[ 174.198608] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 174.219665] request_suspend_state: wakeup (0->0) at 174204803463 (2014-06-26 20:58:13.881347650 UTC) <3>[ 179.245605] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 179.265258] request_suspend_state: wakeup (0->0) at 179250401072 (2014-06-26 20:58:18.926945259 UTC) <3>[ 184.292449] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 184.312805] request_suspend_state: wakeup (0->0) at 184297908810 (2014-06-26 20:58:23.974452997 UTC) <3>[ 189.339233] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 189.351104] request_suspend_state: wakeup (0->0) at 189336241279 (2014-06-26 20:58:29.012785466 UTC)
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
36Hi all!
-------------------------------------------------- EDIT --------------------------------------------
I have given up with porting this a long time ago.. I am waiting for sources.
Gladly @los93sol has made a lot of progress with Android L porting to Tuna.
So I am trying to port android L 'LPV81B' SDK system (Android L Preview armeabi-v7) to Tuna, but I need help. I've never ported ROMs to Samsung Galaxy Nexus and I need help from developers or users with knowledge of porting who are interested. so I leave here my port ROM of Andorid L SDK 'LPV81B'. It's not booting, it hangs on Google splash logo. Feel free to do (almost whatever) what you want with this port, I hope somebody gets it working on tuna.
What's already done:
Added Maguro and tuna vendor files (not toro/toro+) to system/lib/vendor, system/lib/, system/bin/
Added keylayout files to usr, including touchscreen file for mms_ts
Removed goldfish files from lib/hw/ replaced them with tuna's files and added missing *default.so files to lib/hw/
system/bin:
replaced vold, rild, sensorservice.. + added tuna's files (I don't remember what else)
system/lib/:
replaced egl folder, replaced libEGL.so, libgles*.so files, added tuna's files
system/etc/:
added tuna's files, replaced some files
build.prop edited to use tuna's files form lib/hw/, added board.platform to omap4
added tuna's boot files, init.rc, ueventd.rc and some other files are Android L's files, init file and sbin folder are tuna's
Kernel my built 3.0.72 AOSP tuna omap kernel:
https://android.googlesource.com/kernel/omap/+/android-omap-tuna-3.0-jb-mr2
etc.
_______________________
ROM have been made flashable with JustArchi's toolkit, mounting lines and unmounting lines, + other lines have been taken from my ROM Dreams KK.. to make this Android L ROM port flashable. - Thanks to @JustArchi
________________________
I really hope somebody gets this working
Here's SDK system dump with the ramdisk: http://xdaforums.com/showthread.php?p=53699397
Here's my ported Android L:
https://mega.co.nz/#!l1VmHLCa!Q9kj3Usps7lb8LQ7LqX4vmb4Pfblv5wnp5SCymrUhb0
dmesg log:
Code:<6>[ 0.000000] Initializing cgroup subsys cpu <5>[ 0.000000] Linux version 3.0.72-gfb3c9ac (carlos@Carlos) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Tue Jun 24 08:29:38 EEST 2014 <4>[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache <4>[ 0.000000] Machine: Tuna <6>[ 0.000000] Reserving 16777216 bytes SDRAM for VRAM <4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc <6>[ 0.000000] OMAP4460 ES1.1 <6>[ 0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000 <6>[ 0.000000] SMC: Allocated workspace of 0x300000 Bytes at (0xbfd00000) <7>[ 0.000000] On node 0 totalpages: 182272 <7>[ 0.000000] free_area_init_node: node 0, pgdat c082a780, node_mem_map c09da000 <7>[ 0.000000] Normal zone: 256 pages used for memmap <7>[ 0.000000] Normal zone: 0 pages reserved <7>[ 0.000000] Normal zone: 32512 pages, LIFO batch:7 <7>[ 0.000000] HighMem zone: 1792 pages used for memmap <7>[ 0.000000] HighMem zone: 147712 pages, LIFO batch:31 <6>[ 0.000000] PERCPU: Embedded 5 pages/cpu @c11e1000 s7520 r0 d12960 u32768 <7>[ 0.000000] pcpu-alloc: s7520 r0 d12960 u32768 alloc=8*4096 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 180224 <5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 mem=1G vmalloc=768M omap_wdt.timer_margin=30 no_console_suspend ...... .... <5>[ 4.130737] type=1403 audit(1403816123.789:2): policy loaded auid=4294967295 ses=4294967295 <4>[ 4.131378] SELinux: Loaded policy from /sepolicy <5>[ 4.141021] type=1404 audit(1403816123.804:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 <6>[ 4.843627] max17040 4-0036: online = 1 vcell = 4175000 soc = 100 status = 4 health = 1 temp = 380 charger status = 1 <3>[ 6.071197] init: /init.rc: 291: invalid command 'restorecon_recursive' <3>[ 6.075195] init: invalid line ueventd.rc line for 'subsystem' <3>[ 6.075256] init: invalid line ueventd.rc line for 'devname' <3>[ 6.205108] init: /dev/hw_random not found <6>[ 6.205261] keychord: using input dev tuna-gpio-keypad for fevent <7>[ 6.241729] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts <7>[ 6.242126] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 6.244201] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 6.244476] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 6.311859] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts <6>[ 6.322509] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null) <7>[ 6.322662] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr <6>[ 6.329345] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) <7>[ 6.329467] SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr <6>[ 6.752258] EXT4-fs (mmcblk0p11): recovery complete <6>[ 6.760589] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro <7>[ 6.760986] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr <6>[ 6.804168] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.0/by-name/cache <6>[ 6.823547] mms_ts 3-0048: fw version 0x65 already present <6>[ 6.824981] mms_ts 3-0048: Melfas MMS-series touch controller initialized <6>[ 6.959716] SELinux: Context u:object_r:system_library_file:s0 is not valid (left unmapped). <6>[ 7.065216] omap-rproc omap-rproc.1: Loaded BIOS image ducati-m3.bin, size 4515868 <6>[ 7.065582] omap-rproc omap-rproc.1: BIOS image version is 2 <6>[ 7.083343] e2fsck: e2fsck 1.42.9 (28-Dec-2013) <6>[ 7.083892] e2fsck: /dev/block/platform/omap/omap_hsmmc.0/by-name/cache: clean, 25/27648 files, 3619/110592 blocks <6>[ 7.088287] omap-iommu omap-iommu.0: iommu_get: ducati qos_request <6>[ 7.098297] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic <7>[ 7.098663] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr <4>[ 7.105407] omap_hwmod: ipu: failed to hardreset <6>[ 7.106201] omap-iommu omap-iommu.0: ducati: version 2.1 <6>[ 7.112304] omap-rproc omap-rproc.1: remote processor ipu is now up <6>[ 7.125701] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 7.125793] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 7.125854] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 7.125976] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 7.126068] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32 <6>[ 7.126312] rpmsg_client_sample rpmsg3: new channel: 0x400 <-> 0x32! <6>[ 7.126434] rpmsg_server_sample rpmsg1: incoming msg 1 (src: 0x32) <7>[ 7.126525] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.126647] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33 <6>[ 7.126770] rpmsg_client_sample rpmsg4: new channel: 0x401 <-> 0x33! <6>[ 7.126922] rpmsg_client_sample rpmsg3: incoming msg 1 (src: 0x32) <7>[ 7.127014] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.127105] rpmsg_server_sample rpmsg1: incoming msg 2 (src: 0x32) <7>[ 7.127227] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.127349] rpmsg_client_sample rpmsg4: incoming msg 2 (src: 0x33) <7>[ 7.127410] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.127532] rpmsg_client_sample rpmsg3: incoming msg 3 (src: 0x32) <7>[ 7.127593] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.127716] rpmsg_server_sample rpmsg1: incoming msg 3 (src: 0x32) <7>[ 7.127838] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.127899] rpmsg_client_sample rpmsg4: incoming msg 4 (src: 0x33) <7>[ 7.128021] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.128143] rpmsg_client_sample rpmsg3: incoming msg 5 (src: 0x32) <7>[ 7.128204] rpmsg_sample_cb68 65 6c 6c 6f 20 77 6f 72 6c 64 21 hello world! <6>[ 7.128326] rpmsg_server_sample rpmsg1: incoming msg 4 (src: 0x32) .... <6>[ 7.524139] EXT4-fs (mmcblk0p12): recovery complete <6>[ 7.527954] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro <7>[ 7.528198] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr <6>[ 7.569702] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.0/by-name/userdata <6>[ 7.638824] e2fsck: e2fsck 1.42.9 (28-Dec-2013) <6>[ 7.638977] e2fsck: /dev/block/platform/omap/omap_hsmmc.0/by-name/userdata: clean, 14792/887696 files, 3277276/3549691 blocks <6>[ 7.659973] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic <7>[ 7.660186] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr <6>[ 7.665710] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) <7>[ 7.799957] SELinux: 512 avtab hash slots, 1323 rules. <7>[ 7.800994] SELinux: 512 avtab hash slots, 1323 rules. <7>[ 7.801086] SELinux: 1 users, 2 roles, 288 types, 1 bools, 1 sens, 1024 cats <7>[ 7.801422] SELinux: 84 classes, 1323 rules <6>[ 7.955230] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c <6>[ 7.955596] rpmsg_omx rpmsg-omx1: new OMX connection srv channel: 1024 -> 60! <5>[ 8.182861] type=1403 audit(1403816127.835:4): policy loaded auid=4294967295 ses=4294967295 <4>[ 8.183563] SELinux: Loaded policy from /sepolicy <3>[ 8.212005] init: /dev/hw_random not found <3>[ 8.225158] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <5>[ 8.228179] type=1400 audit(1403816127.882:5): avc: denied { entrypoint } for pid=117 comm="init" path="/sbin/healthd" dev=rootfs ino=1530 scontext=u:r:healthd:s0 tcontext=u:object_r:rootfs:s0 tclass=file <3>[ 8.231079] healthd: wakealarm_init: timerfd_create failed <4>[ 8.232604] healthd: BatteryPresentPath not found <6>[ 8.232696] binder: 117:117 transaction failed 29189, size 0-0 <3>[ 8.274200] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64' <3>[ 8.277954] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery' <3>[ 8.282501] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}' <3>[ 8.282623] init: powerctl: cannot expand '${sys.powerctl}' <3>[ 8.282714] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}' <3>[ 8.282867] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes' <3>[ 8.282989] init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}' <3>[ 8.283142] init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd' <3>[ 8.285034] HDCP: failed to load keys <3>[ 8.288024] init: property 'persist.sys.tuna.off_mode' doesn't exist while expanding '${persist.sys.tuna.off_mode}' <3>[ 8.288177] init: cannot expand '${persist.sys.tuna.off_mode}' while writing to '/d/pm_debug/enable_off_mode' <3>[ 8.288330] init: property 'ril.modem.lte.powercontrol' doesn't exist while expanding '${ril.modem.lte.powercontrol}' <3>[ 8.288482] init: cannot expand '${ril.modem.lte.powercontrol}' while writing to '/sys/bus/usb/devices/1-1/power/control' <3>[ 8.288726] android_usb: already disabled <6>[ 8.292419] adb_open <6>[ 8.292541] adb_bind_config <7>[ 8.351928] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts <6>[ 8.428070] warning: `rild' uses 32-bit capabilities (legacy support in use) <6>[ 8.474822] request_suspend_state: wakeup (3->0) at 8459930422 (2014-06-26 20:55:28.136474609 UTC) <3>[ 8.476287] init: untracked pid 157 exited <3>[ 8.483306] init: sys_prop: permission denied uid:1001 name:net.rmnet1.dns1 <3>[ 8.483886] init: sys_prop: permission denied uid:1001 name:net.rmnet1.dns2 <3>[ 8.484161] init: sys_prop: permission denied uid:1001 name:net.rmnet1.gw <3>[ 8.484558] init: sys_prop: permission denied uid:1001 name:net.rmnet2.dns1 <3>[ 8.484802] init: sys_prop: permission denied uid:1001 name:net.rmnet2.dns2 <3>[ 8.485015] init: sys_prop: permission denied uid:1001 name:net.rmnet2.gw <6>[ 8.533813] [MODEM_IF] misc_open : umts_boot0 <6>[ 8.533935] omap_hsi omap_hsi.0: HSI clock is now 96000000 <6>[ 8.534423] omap_hsi omap_hsi.0: Entering RX wakeup in 3 wires mode (no CAWAKE) <6>[ 8.534576] [MODEM_IF] xmm6260_off() <6>[ 8.534637] [MODEM_IF] xmm6260_on() <6>[ 8.584960] android_work: sent uevent USB_STATE=CONNECTED <6>[ 8.589721] android_work: sent uevent USB_STATE=DISCONNECTED <6>[ 8.716918] android_work: sent uevent USB_STATE=CONNECTED <6>[ 8.718109] android_usb gadget: high speed config #1: android <6>[ 8.718444] android_work: sent uevent USB_STATE=CONFIGURED <6>[ 8.849334] [MODEM_IF] misc_release : umts_boot0 <3>[ 8.849548] omap_hsi omap_hsi.0: hsi_write_cancel ch 0 <3>[ 8.849731] omap_hsi omap_hsi.0: __hsi_write_cancel : -125 <3>[ 8.850067] omap_hsi omap_hsi.0: hsi_read_cancel ch 0 <3>[ 8.850250] omap_hsi omap_hsi.0: __hsi_read_cancel : -125 <3>[ 8.850585] omap_hsi omap_hsi.0: __hsi_write_cancel : -61 <3>[ 8.850769] omap_hsi omap_hsi.0: __hsi_read_cancel : -61 <6>[ 8.851196] [MODEM_IF] misc_open : umts_boot1 <6>[ 8.851409] omap_hsi omap_hsi.0: Entering RX wakeup in 4 wires mode <4>[ 11.463836] adbd (163): /proc/163/oom_adj is deprecated, please use /proc/163/oom_score_adj instead. <6>[ 12.762847] [MODEM_IF] misc_release : umts_boot1 <3>[ 12.763061] omap_hsi omap_hsi.0: hsi_write_cancel ch 0 <3>[ 12.763244] omap_hsi omap_hsi.0: __hsi_write_cancel : -61 <3>[ 12.763580] omap_hsi omap_hsi.0: hsi_read_cancel ch 0 <3>[ 12.763763] omap_hsi omap_hsi.0: __hsi_read_cancel : -125 <3>[ 12.764099] omap_hsi omap_hsi.0: __hsi_write_cancel : -61 <3>[ 12.764251] omap_hsi omap_hsi.0: __hsi_read_cancel : -61 <6>[ 12.766326] [MODEM_IF] misc_open : umts_ipc0 <6>[ 12.766723] omap_hsi omap_hsi.0: Entering RX wakeup in 4 wires mode <6>[ 12.767089] [MODEM_IF] misc_open : umts_rfs0 <6>[ 12.865051] [MODEM_IF] PA EVENT : reset =1, pa=1, cp_dump=0 <6>[ 12.865386] [MODEM_IF] umts_ipc0 state changed: ONLINE <3>[ 13.566467] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 13.594909] request_suspend_state: wakeup (0->0) at 13580017087 (2014-06-26 20:55:33.256561274 UTC) <3>[ 18.800872] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 18.831329] request_suspend_state: wakeup (0->0) at 18816466098 (2014-06-26 20:55:38.493010285 UTC) <3>[ 23.847930] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 23.867980] request_suspend_state: wakeup (0->0) at 23853097546 (2014-06-26 20:55:43.529641733 UTC) <3>[ 28.888519] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 28.936553] request_suspend_state: wakeup (0->0) at 28922431907 (2014-06-26 20:55:48.598976094 UTC) <3>[ 33.969146] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 33.984466] request_suspend_state: wakeup (0->0) at 33969387436 (2014-06-26 20:55:53.645931623 UTC) <3>[ 33.985656] init: untracked pid 212 exited <3>[ 38.999359] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 39.027862] request_suspend_state: wakeup (0->0) at 39012501632 (2014-06-26 20:55:58.689045819 UTC) <3>[ 43.043426] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 43.071044] request_suspend_state: wakeup (0->0) at 43056482398 (2014-06-26 20:56:02.733026585 UTC) <3>[ 48.096984] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 48.130218] request_suspend_state: wakeup (0->0) at 48115475675 (2014-06-26 20:56:07.792019862 UTC) <3>[ 48.131042] init: untracked pid 235 exited <3>[ 53.161621] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 53.167266] request_suspend_state: wakeup (0->0) at 53154605724 (2014-06-26 20:56:12.831149911 UTC) <6>[ 57.695526] max17040 4-0036: online = 1 vcell = 4193750 soc = 100 status = 4 health = 1 temp = 380 charger status = 1 <3>[ 58.200683] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 58.219146] request_suspend_state: wakeup (0->0) at 58202364779 (2014-06-26 20:56:17.878908966 UTC) <3>[ 63.238891] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 63.261810] request_suspend_state: wakeup (0->0) at 63246652032 (2014-06-26 20:56:22.923196219 UTC) <3>[ 68.279937] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 68.309631] request_suspend_state: wakeup (0->0) at 68294739707 (2014-06-26 20:56:27.971283894 UTC) <3>[ 73.325622] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 73.346221] request_suspend_state: wakeup (0->0) at 73331359760 (2014-06-26 20:56:33.007903947 UTC) <3>[ 78.378356] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 78.397674] request_suspend_state: wakeup (0->0) at 78382801800 (2014-06-26 20:56:38.059345987 UTC) <3>[ 83.425231] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 83.444305] request_suspend_state: wakeup (0->0) at 83429443660 (2014-06-26 20:56:43.105987847 UTC) <3>[ 88.461547] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 88.474304] request_suspend_state: wakeup (0->0) at 88459411788 (2014-06-26 20:56:48.135955975 UTC) <3>[ 93.503448] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 93.525085] request_suspend_state: wakeup (0->0) at 93510195024 (2014-06-26 20:56:53.186739211 UTC) <3>[ 98.543792] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 98.570678] request_suspend_state: wakeup (0->0) at 98555816902 (2014-06-26 20:56:58.232361089 UTC) <3>[ 103.589935] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 103.617095] request_suspend_state: wakeup (0->0) at 103602194329 (2014-06-26 20:57:03.278738516 UTC) <6>[ 108.052307] max17040 4-0036: online = 1 vcell = 4173750 soc = 100 status = 4 health = 1 temp = 380 charger status = 1 <3>[ 108.633270] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 108.651397] request_suspend_state: wakeup (0->0) at 108636644275 (2014-06-26 20:57:08.313188462 UTC) <3>[ 113.690826] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 113.711181] request_suspend_state: wakeup (0->0) at 113696326351 (2014-06-26 20:57:13.372870538 UTC) <3>[ 118.737731] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 118.752807] request_suspend_state: wakeup (0->0) at 118737953464 (2014-06-26 20:57:18.414497651 UTC) <3>[ 123.776916] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 123.804351] request_suspend_state: wakeup (0->0) at 123789523770 (2014-06-26 20:57:23.466067957 UTC) <3>[ 128.820800] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 128.834411] request_suspend_state: wakeup (0->0) at 128819544505 (2014-06-26 20:57:28.496088692 UTC) <3>[ 133.862792] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 133.881927] request_suspend_state: wakeup (0->0) at 133867059960 (2014-06-26 20:57:33.543604147 UTC) <3>[ 138.909484] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 138.929931] request_suspend_state: wakeup (0->0) at 138915153950 (2014-06-26 20:57:38.591698137 UTC) <3>[ 143.945800] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 143.959167] request_suspend_state: wakeup (0->0) at 143944311243 (2014-06-26 20:57:43.620855430 UTC) <3>[ 148.985076] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 149.007598] request_suspend_state: wakeup (0->0) at 148992737246 (2014-06-26 20:57:48.669281433 UTC) <3>[ 154.034515] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 154.055023] request_suspend_state: wakeup (0->0) at 154040197721 (2014-06-26 20:57:53.716711401 UTC) <3>[ 159.077636] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 159.089447] max17040 4-0036: online = 1 vcell = 4171250 soc = 100 status = 4 health = 1 temp = 380 charger status = 1 <6>[ 159.097839] request_suspend_state: wakeup (0->0) at 159082977740 (2014-06-26 20:57:58.759521927 UTC) <3>[ 164.117767] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 164.133422] request_suspend_state: wakeup (0->0) at 164118566298 (2014-06-26 20:58:03.795110485 UTC) <3>[ 169.152801] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 169.173797] request_suspend_state: wakeup (0->0) at 169158892589 (2014-06-26 20:58:08.835436776 UTC) <3>[ 174.198608] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 174.219665] request_suspend_state: wakeup (0->0) at 174204803463 (2014-06-26 20:58:13.881347650 UTC) <3>[ 179.245605] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 179.265258] request_suspend_state: wakeup (0->0) at 179250401072 (2014-06-26 20:58:18.926945259 UTC) <3>[ 184.292449] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 184.312805] request_suspend_state: wakeup (0->0) at 184297908810 (2014-06-26 20:58:23.974452997 UTC) <3>[ 189.339233] init: cannot setexeccon('u:r:logd:s0'): Invalid argument <6>[ 189.351104] request_suspend_state: wakeup (0->0) at 189336241279 (2014-06-26 20:58:29.012785466 UTC)9Glad to see more developers taking an interest in this now. I have made some significant progress over the weekend. I did a checkout of the l preview branch, merged shiny's tree in and made the required changes to get it to compile. The build doesn't produce a fully working ramdisk and kernel, but it was valid enough that I was able to hand edit it to get the l preview branch booting up on my Toro, this is build 4.4.4.43.43.43. Now, this in and of itself doesn't mean a whole lot, but it gave me a fresh libc.so and most of the other libs that are dependencies for L. I should note that tf_daemon and libsec-ril_lte.so will need to be hacked to eliminate MD5_Init from the linked tables in both binaries and I had to disable both of those proprietary binaries in init to get the rom to boot. That means, as you would expect, it is VERY unstable, but it boots! So, having that working I then merged in app, app-priv, and framework from hammerhead's L preview image, the result...better than before, but still not quite there! It gets all the way up to art trying to do it's thing then dies there, but that's a whole lot further than we were before, zygote is actually starting up at this point and we're onto the framework!!! I am going to mess around with the proprietary libs first as I believe that the same method to fix those can be used to fix the new art libs as well.8Still google splash logo, at least now I got kernel log.. using tuna's files again, just some minor modifications to init.rc nd default.rc and init.environ.rc and ueventd.rcCode:2014 at 05:07:51 <4>[ 4.099365] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) <4>[ 4.147308] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) <6>[ 4.151611] mmc1: new high speed SDIO card at address 0001 <4>[ 4.153503] F1 signature read @0x18000000=0x16844330 <4>[ 4.163360] DHD: dongle ram size is set to 294912(orig 294912) <4>[ 4.164886] wl_create_event_handler thr:5d started <4>[ 4.172973] p2p0: P2P Interface Registered <4>[ 4.173370] dhd_attach thr:5e started <4>[ 4.173706] dhd_attach thr:5f started <4>[ 4.174224] dhd_attach thr:60 started <4>[ 4.180725] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33 <4>[ 4.180908] wifi_set_power = 0 <4>[ 4.702758] =========== WLAN placed in RESET ======== <6>[ 4.704620] fsa9480 4-0025: cable detect change, from 'unknown/none' to 'usb-peripheral' <6>[ 4.707366] twl_rtc twl_rtc: setting system clock to 2014-06-27 16:37:24 UTC (1403887044) <6>[ 4.709777] Freeing init memory: 292K <7>[ 4.729614] SELinux: 512 avtab hash slots, 1323 rules. <7>[ 4.730285] SELinux: 512 avtab hash slots, 1323 rules. <7>[ 4.730346] SELinux: 1 users, 2 roles, 288 types, 1 bools, 1 sens, 1024 cats <7>[ 4.730560] SELinux: 84 classes, 1323 rules <7>[ 4.731658] SELinux: Completing initialization. <7>[ 4.731811] SELinux: Setting up existing superblocks. <7>[ 4.731903] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts <7>[ 4.732086] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts <7>[ 4.732238] SELinux: initialized (dev bdev, type bdev), not configured for labeling <7>[ 4.732513] SELinux: initialized (dev proc, type proc), uses genfs_contexts <7>[ 4.732696] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 4.732788] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts <7>[ 4.736877] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs <7>[ 4.737030] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs <7>[ 4.737091] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling <7>[ 4.737213] SELinux: initialized (dev devpts, type devpts), uses transition SIDs <7>[ 4.737335] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts <7>[ 4.737457] SELinux: initialized (dev mtd_inodefs, type mtd_inodefs), not configured for labeling <7>[ 4.737579] SELinux: initialized (dev usbfs, type usbfs), not configured for labeling <7>[ 4.737670] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 4.737762] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts <6>[ 4.741699] max17040 4-0036: online = 1 vcell = 4146250 soc = 97 status = 3 health = 1 temp = 370 charger status = 0 <6>[ 4.756744] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1380000,Calib=1190000,margin=0 <5>[ 4.816436] type=1403 audit(1403887044.601:2): policy loaded auid=4294967295 ses=4294967295 <4>[ 4.816680] SELinux: Loaded policy from /sepolicy <5>[ 4.819824] type=1404 audit(1403887044.609:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 <6>[ 5.732238] max17040 4-0036: online = 1 vcell = 4140000 soc = 97 status = 3 health = 1 temp = 370 charger status = 0 <3>[ 6.660217] init: /init.zygote32.rc: 1: ignored duplicate definition of service 'zygote' <3>[ 6.792755] init: /dev/hw_random not found <6>[ 6.792877] keychord: using input dev tuna-gpio-keypad for fevent <7>[ 6.843353] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts <7>[ 6.843780] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 6.845855] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 6.846130] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <7>[ 6.889709] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts <6>[ 6.900207] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null) <7>[ 6.900299] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr <6>[ 6.906707] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) <7>[ 6.906829] SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr <6>[ 6.918640] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro <7>[ 6.918762] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr <6>[ 6.944427] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.0/by-name/cache <4>[ 7.014617] sr_class1p5_calib_work: core Stop sampling: Voltage Nominal=962000 samples=12 <6>[ 7.015167] sr_class1p5_calib_work: core: Calibration complete: Voltage:Nominal=962000,Calib=886240,margin=38000 <4>[ 7.015533] sr_class1p5_calib_work: mpu Stop sampling: Voltage Nominal=1025000 samples=13 <6>[ 7.015930] sr_class1p5_calib_work: mpu: Calibration complete: Voltage:Nominal=1025000,Calib=840000,margin=10000 <6>[ 7.125274] omap-rproc omap-rproc.1: Loaded BIOS image ducati-m3.bin, size 4515868 <6>[ 7.125701] omap-rproc omap-rproc.1: BIOS image version is 2 <6>[ 7.143646] SELinux: Context u:object_r:system_library_file:s0 is not valid (left unmapped). <6>[ 7.149780] omap-iommu omap-iommu.0: iommu_get: ducati qos_request <4>[ 7.163757] omap_hwmod: ipu: failed to hardreset <6>[ 7.164031] omap-iommu omap-iommu.0: ducati: version 2.1 <6>[ 7.170013] omap-rproc omap-rproc.1: remote processor ipu is now up <6>[ 7.183441] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 7.183502] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 7.183624] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 7.183746] omap_rpmsg_mbox_callback: received echo reply from ipu ! <6>[ 7.183837] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32 <6>[ 7.184143] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33 <6>[ 7.184387] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx addr 0x3c <6>[ 7.184631] rpmsg_omx rpmsg-omx0: new OMX connection srv channel: 1024 -> 60! <6>[ 7.189514] mms_ts 3-0048: fw version 0x65 already present <6>[ 7.189758] mms_ts 3-0048: Melfas MMS-series touch controller initialized <6>[ 7.200073] e2fsck: e2fsck 1.42.9 (28-Dec-2013) <6>[ 7.200164] e2fsck: /dev/block/platform/omap/omap_hsmmc.0/by-name/cache: clean, 25/27648 files, 3624/110592 blocks <6>[ 7.211639] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic <7>[ 7.211761] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr <6>[ 7.222045] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro <7>[ 7.222167] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr <6>[ 7.256744] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/omap/omap_hsmmc.0/by-name/userdata <6>[ 7.311737] e2fsck: e2fsck 1.42.9 (28-Dec-2013) <6>[ 7.311828] e2fsck: /dev/block/platform/omap/omap_hsmmc.0/by-name/userdata: clean, 15941/887696 files, 3283963/3549691 blocks <6>[ 7.321990] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=panic <7>[ 7.322113] SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr <6>[ 7.326110] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) <6>[ 7.354278] SELinux: Context u:object_r:adb_keys_file:s0 is not valid (left unmapped). <6>[ 7.429229] SELinux: Context u:object_r:media_data_file:s0 is not valid (left unmapped). <6>[ 7.442504] SELinux: Context u:object_r:media_rw_data_file:s0 is not valid (left unmapped). <3>[ 7.462097] init: /dev/hw_random not found <5>[ 7.476837] type=1400 audit(1403887047.257:4): avc: denied { entrypoint } for pid=119 comm="init" path="/sbin/healthd" dev=rootfs ino=1558 scontext=u:r:healthd:s0 tcontext=u:object_r:rootfs:s0 tclass=file <3>[ 7.478515] healthd: wakealarm_init: timerfd_create failed <4>[ 7.481567] healthd: BatteryPresentPath not found <6>[ 7.481811] binder: 119:119 transaction failed 29189, size 0-0 <3>[ 7.487213] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64' <3>[ 7.547943] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}' <3>[ 7.548034] init: powerctl: cannot expand '${sys.powerctl}' <3>[ 7.548187] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}' <3>[ 7.548339] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes' <3>[ 7.548522] init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}' <3>[ 7.548675] init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd' <3>[ 7.549560] init: property 'persist.sys.tuna.off_mode' doesn't exist while expanding '${persist.sys.tuna.off_mode}' <3>[ 7.549713] init: cannot expand '${persist.sys.tuna.off_mode}' while writing to '/d/pm_debug/enable_off_mode' <3>[ 7.549865] init: property 'ril.modem.lte.powercontrol' doesn't exist while expanding '${ril.modem.lte.powercontrol}' <3>[ 7.550018] init: cannot expand '${ril.modem.lte.powercontrol}' while writing to '/sys/bus/usb/devices/1-1/power/control' <3>[ 7.550231] android_usb: already disabled <6>[ 7.555053] adb_open <6>[ 7.555114] mtp_bind_config <6>[ 7.555206] adb_bind_config <6>[ 7.561218] SELinux: Context u:object_r:install_data_file:s0 is not valid (left unmapped). <3>[ 7.564971] HDCP: failed to load keys <7>[ 7.673126] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts <6>[ 7.679260] warning: `daemonsu' uses 32-bit capabilities (legacy support in use) <6>[ 7.730468] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null) <6>[ 7.738555] request_suspend_state: wakeup (3->0) at 7731872560 (2014-06-27 16:37:27.523559570 UTC) <6>[ 7.827636] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx addr 0x3c <6>[ 7.828002] rpmsg_omx rpmsg-omx1: new OMX connection srv channel: 1024 -> 60! <6>[ 7.844421] android_work: sent uevent USB_STATE=CONNECTED <6>[ 7.849060] android_work: sent uevent USB_STATE=DISCONNECTED <3>[ 7.855743] init: sys_prop: permission denied uid:1001 name:net.rmnet1.dns1 <3>[ 7.856018] init: sys_prop: permission denied uid:1001 name:net.rmnet1.dns2 <3>[ 7.856414] init: sys_prop: permission denied uid:1001 name:net.rmnet1.gw <3>[ 7.856781] init: sys_prop: permission denied uid:1001 name:net.rmnet2.dns1 <3>[ 7.857025] init: sys_prop: permission denied uid:1001 name:net.rmnet2.dns2 <3>[ 7.857208] init: sys_prop: permission denied uid:1001 name:net.rmnet2.gw <6>[ 7.884918] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null) <6>[ 7.900512] EXT4-fs (mmcblk0p10): re-mounted. Opts: (null) <6>[ 7.906433] [MODEM_IF] misc_open : umts_boot0 <6>[ 7.906555] omap_hsi omap_hsi.0: HSI clock is now 96000000 <6>[ 7.907073] omap_hsi omap_hsi.0: Entering RX wakeup in 3 wires mode (no CAWAKE) <6>[ 7.907226] [MODEM_IF] xmm6260_off() <6>[ 7.907287] [MODEM_IF] xmm6260_on() <7>[ 7.930236] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs <6>[ 7.976226] android_work: sent uevent USB_STATE=CONNECTED <6>[ 7.977325] android_usb gadget: high speed config #1: android <6>[ 7.977508] android_work: sent uevent USB_STATE=CONFIGURED <6>[ 8.223937] [MODEM_IF] misc_release : umts_boot0 <3>[ 8.224273] omap_hsi omap_hsi.0: hsi_write_cancel ch 0 <3>[ 8.224487] omap_hsi omap_hsi.0: __hsi_write_cancel : -125 <3>[ 8.224822] omap_hsi omap_hsi.0: hsi_read_cancel ch 0 <3>[ 8.225006] omap_hsi omap_hsi.0: __hsi_read_cancel : -125 <3>[ 8.225341] omap_hsi omap_hsi.0: __hsi_write_cancel : -61 <3>[ 8.225555] omap_hsi omap_hsi.0: __hsi_read_cancel : -61 <6>[ 8.225982] [MODEM_IF] misc_open : umts_boot1 <6>[ 8.226196] omap_hsi omap_hsi.0: Entering RX wakeup in 4 wires mode <6>[ 12.207489] [MODEM_IF] misc_release : umts_boot1 <3>[ 12.207611] omap_hsi omap_hsi.0: hsi_write_cancel ch 0 <3>[ 12.207672] omap_hsi omap_hsi.0: __hsi_write_cancel : -61 <3>[ 12.207794] omap_hsi omap_hsi.0: hsi_read_cancel ch 0 <3>[ 12.207855] omap_hsi omap_hsi.0: __hsi_read_cancel : -125 <3>[ 12.207946] omap_hsi omap_hsi.0: __hsi_write_cancel : -61 <3>[ 12.208007] omap_hsi omap_hsi.0: __hsi_read_cancel : -61 <6>[ 12.208709] [MODEM_IF] misc_open : umts_ipc0 <6>[ 12.208862] omap_hsi omap_hsi.0: Entering RX wakeup in 4 wires mode <6>[ 12.208984] [MODEM_IF] misc_open : umts_rfs0 <6>[ 12.310485] [MODEM_IF] PA EVENT : reset =1, pa=1, cp_dump=0 <6>[ 12.310699] [MODEM_IF] umts_ipc0 state changed: ONLINE <6>[ 12.909210] request_suspend_state: wakeup (0->0) at 12902496338 (2014-06-27 16:37:32.694183348 UTC) <6>[ 17.257202] request_suspend_state: wakeup (0->0) at 17250529330 (2014-06-27 16:37:37.042216340 UTC) <6>[ 22.298339] request_suspend_state: wakeup (0->0) at 22291458412 (2014-06-27 16:37:42.083145422 UTC) <6>[ 27.344818] request_suspend_state: wakeup (0->0) at 27338475994 (2014-06-27 16:37:47.130163004 UTC) <6>[ 32.390014] request_suspend_state: wakeup (0->0) at 32382701287 (2014-06-27 16:37:52.174388297 UTC) <6>[ 37.436279] request_suspend_state: wakeup (0->0) at 37429848524 (2014-06-27 16:37:57.221535534 UTC) <6>[ 42.482818] request_suspend_state: wakeup (0->0) at 42476849474 (2014-06-27 16:38:02.268536484 UTC) <6>[ 47.538970] request_suspend_state: wakeup (0->0) at 47529775429 (2014-06-27 16:38:07.321462439 UTC)8Quick N5 Android L dev. prev. port (dirty port) for those who want to port this instead of SDK...
https://drive.google.com/file/d/0BxlYDVLp_RkMT0RKQkE2eFE3aE0/edit?usp=sharing
Removed hammerhread stuff (most of them)
Removed Gapps (most of them)
Added tuna's files...
vold, sensorservice from tuna..
Ramdisk:
same 3.0.72 kernel
Hammerhead's boot files
added tuna's init.tuna.rc, ueventd.tuna.rc, etc.
Same problem rebooting all the time form google splash logo to google splash logo.. (init file problem, no correct init)8After getting BT fixed or at least getting video graphics fixed from my new notebook running Ubuntu 14, then I'll start syncing LP sources (when the sources are completely pushed...)... :silly: :silly: :silly: :silly: :silly: :silly: :silly:
