pinout emmc Fire HD
- Thread starter Valery_
- Start date
Which he is this for, the 2013? Given that is just the solder contacts not the printout for what goes where.
Sent from my LG-P769 using Tapatalk
Sent from my LG-P769 using Tapatalk
No, that's a board for the the 2012 Fire HD. It's got the mini HDMI output port next to the charge port.
And yeah, knowing what goes where would be a big help.
Sent from my iPod touch using Tapatalk, somewhere in the time vortex
Last edited:
I think my phone was glitching when I viewed this post originally and not showing all the pictures either that or it was edited since then.
Sent from my Amazon Tate using Tapatalk
Sent from my Amazon Tate using Tapatalk
I accidentally flashed boot, system and recovery from a KF2 on a KF HD 7 like this.
Soldered the test point to a SD reader but it didn't work. Any way to recover the eMMC without expensive tools?
Any help would be greatly appreciated...
Regards
Soldered the test point to a SD reader but it didn't work. Any way to recover the eMMC without expensive tools?
Any help would be greatly appreciated...
Regards
Just found this thread after having bought a job lot of tablets on FleaBay, one of which is a 2012 KFHD (camera version, Dolby Audio, HDMI port next to micro USB port) which has the OMAP connect/disconnect issue.
You may recall that I debricked a hard bricked Otter2 Kindle (can't recall what gen that is) about 16 months ago, after having flashed the wrong bootloader, and I posted my photos on Flickr: https://www.flickr.com/photos/22008695@N03/albums/72157660358184524
Anyway, I've found this thread and I wanted to add to it by knocking up a quick graphic for those who are currently mid-debrick, but are visual learners like me and want a clear pin map to see where to solder the SD card reader lines to, so I've made one and attached it (also linked to Flickr) - Hope it helps people
You may recall that I debricked a hard bricked Otter2 Kindle (can't recall what gen that is) about 16 months ago, after having flashed the wrong bootloader, and I posted my photos on Flickr: https://www.flickr.com/photos/22008695@N03/albums/72157660358184524
Anyway, I've found this thread and I wanted to add to it by knocking up a quick graphic for those who are currently mid-debrick, but are visual learners like me and want a clear pin map to see where to solder the SD card reader lines to, so I've made one and attached it (also linked to Flickr) - Hope it helps people
Attachments
Last edited:
Just found this thread after having bought a job lot of tablets on FleaBay, one of which is a 2012 KFHD (camera version, Dolby Audio, HDMI port next to micro USB port) which has the OMAP connect/disconnect issue.
You may recall that I debricked a hard bricked Otter2 Kindle (can't recall what gen that is) about 16 months ago, after having flashed the wrong bootloader, and I posted my photos on Flickr: https://www.flickr.com/photos/22008695@N03/albums/72157660358184524
Anyway, I've found this thread and I wanted to add to it by knocking up a quick graphic for those who are currently mid-debrick, but are visual learners like me and want a clear pin map to see where to solder the SD card reader lines to, so I've made one and attached it (also linked to Flickr) - Hope it helps people
Hi, I soldered SD adapter to KFHD board according to your photo and connected to PC.
New disk appeared in File Explorer and whn I click on it the "Please insert disk" message appears. And that's it.
Any idea?
Last edited:
Similar threads
New posts
-
-
Development OP9PRO-LEMONADEP-OPCAM-A14-ROM-WATCHDOGS-KERNELSU-APR 20, 2024
- Latest: diogo99almeida
-
