Your phone formatted a 64gb to fat 32?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
[KERNEL][TW] Note2Core v2.10 - Standard, OC, Extreme; AsylumCore 2.11
- Thread starter antiochasylum
- Start date
-
- Tags
- development
- Status
Your phone formatted a 64gb to fat 32?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
I let the phone format it...not sure what it is formatted too..how can i tell on phone...thought i saw somewhere it is vfat.....
Here is software to format Exfat to Fat32 http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm .
That's what I used. Copying files now then will have of each
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
---------- Post added at 08:32 PM ---------- Previous post was at 08:32 PM ----------
Put it in your pc. Right click and properties
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
I hit the thanks button, but had to say it again. That other one i must be to dense for cause i wasnt doing something right lol. This one was so easy a caveman like me could do it :good:
That's what I used. Copying files now then will have of each
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
---------- Post added at 08:32 PM ---------- Previous post was at 08:32 PM ----------
Put it in your pc. Right click and properties
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Yes, mine is formatted to fat32....my card is a scandisk ultra 64gb....not sure if the ultra mattered....but works.....storage shows total 59.46GB...i am assuming the rest is used for system...The only kernel my card wont be reconized on is the Sabre kernel,,,just an fyi....
Last edited:
Finally got my other ultra 64 to fat 32 thanks to the link posted this kernal is awesome so far. Thanks again
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
stock rom
yes i am.. and it works fine for my uses... nothing special to report other than obviously increased battery drain and seemingly slow charging
Increased battery drain? Do you have supporting screenshots of this?
Slow charging? Those values were not touched from the Samsung kernel source. But let me guess. The stock one charges much quicker right?
I love how people point blame with zero supporting facts.
Just tested the latest Perseus kernel and once again it does not perform with the same consistency as this one.
Like some tests will be fine one time and suck the next while this one seems to always gives me the same results over and over.
Also there is a drop in Mame Reloaded peformance.
The only thing better is Taiji because the GPU is running at 800 so I cannot wait to get at least to 733 which is really the sweetspot I think.
So coming back to AsylumCore and hoping you guys find out the voltages mystery
Like some tests will be fine one time and suck the next while this one seems to always gives me the same results over and over.
Also there is a drop in Mame Reloaded peformance.
The only thing better is Taiji because the GPU is running at 800 so I cannot wait to get at least to 733 which is really the sweetspot I think.
So coming back to AsylumCore and hoping you guys find out the voltages mystery
Just tested the latest Perseus kernel and once again it does not perform with the same consistency as this one.
Like some tests will be fine one time and suck the next while this one seems to always gives me the same results over and over.
Also there is a drop in Mame Reloaded peformance.
The only thing better is Taiji because the GPU is running at 800 so I cannot wait to get at least to 733 which is really the sweetspot I think.
So coming back to AsylumCore and hoping you guys find out the voltages mystery
Still working on that. Lol. Might try and release a 733 GPU version soon
Still working on that. Lol. Might try and release a 733 GPU version soon
Its all cool, is a beast already! :highfive:
Hey guys, I want to try this kernel compared to Perseus which is great already but I'm just curious.
First of is this the right thread for my I317 model since it says 7105 here which lose lte sometime. Secondly, when I tried to flash it it doesn't detect my 64gb sdcard, do I need to reformat it to fat32 or something else, I think it was ext4. Thank you.
Sent from my SGH-I317M using xda app-developers app
First of is this the right thread for my I317 model since it says 7105 here which lose lte sometime. Secondly, when I tried to flash it it doesn't detect my 64gb sdcard, do I need to reformat it to fat32 or something else, I think it was ext4. Thank you.
Sent from my SGH-I317M using xda app-developers app
<br />Originally Posted by shaolin95<br />
Just tested the latest Perseus kernel and once again it does not perform with the same consistency as this one.<br />
Like some tests will be fine one time and suck the next while this one seems to always gives me the same results over and over.<br />
Also there is a drop in Mame Reloaded peformance.<br />
The only thing better is Taiji because the GPU is running at 800 so I cannot wait to get at least to 733 which is really the sweetspot I think.<br />
<br />
So coming back to AsylumCore and hoping you guys find out the voltages mystery
<br />
Still working on that. Lol. Might try and release a 733 GPU version soon
Just wondering if we put in our own line in of 733 or whatever init.d using Smanager and check su and boot save and when we would reboot would that over clock the gpu also. I'm learning and writing scripts and bricking my phone alot until I get them right. Or do I sound like a total retard? It's the only way I have found to learn is read and test on my own phone lol. But as is your kernel is amazing. I'll be donating more tomorrow again.
Sent from the highly modded JDevil Note 2
Still working on that. Lol. Might try and release a 733 GPU version soon
Please add support for xfat 64gb ; I love asylum core but sometimes have flash perseus to use 64gb
thank youSent from my SAMSUNG-SGH-I317 using xda app-developers app
Please add support for xfat 64gb ; I love asylum core but sometimes have flash perseus to use 64gb
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Why don't you format your 64gb card to fat32? It works fine for me and I have 64gb card using Asylum Core. I believe I read NTFS works too.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
- Status
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
33Note2Core Kernel for Galaxy Note II N7100 / N7105 (LTE)
I am posting this here because it works on our LTE notes, since they all use a Qualcomm modem. I am running I on my AT&T note with no issues. All credit goes to g.lewarne - I am just posting here to so he doesn't have to maintain 2 threads. See his original post here
For the moment, exFAT formatted SD cards are NOT supported.
About this kernel
This kernel is built from pure Samsung GT-N7100 source, with modifications and tweaks to provide the best user experience in reliability, performance and stability. Built upon my experience firstly with NoteCore and then HydraCore for the original Note, as many of you know, I strive for the best
There are 4 versions of each kernel, for the International LTE model GT-N7105.
This kernel has all debuging removed - logcat, android log, kernel log, schedular log, etc etc all disabled. This is for performance reasons, so if you are a developer this kernel is probably not for you
Kernel Versions
There are three variants of the kernel for each device
STANDARD (STD) - 1.6ghz FSync() enabled
OVERCLOCK (OC) - 1.8ghz FSync() enabled
EXTREME (EX) - 1.8ghz FSync() disabled
ASYLUM (AS) - 1.920ghz FSync() disabled
The standard version, has no modifications to the processor clocks or voltages and can be considered a direct replacement for the stock kernel, and with FSync() enabled is completely stable
The OC kernel automatically scales up to 1.8ghz, with the proven voltages and stability from the perseus kernel (the same frequency table is used), and with FSync() enabled is completely stable
The EX kernel also scales to 1.8ghz, and has FSync() disabled. It offers by far the best possible performance. In rare circumstances you must be aware that this can lead to data corruption and the need to wipe / reflash a rom back to the phone. 99% of people will have no issues with this, as it has been extensively tested and proven on my previous kernel, but the risk is there. Dont go moaning to me if you lose your data and haven't got a nandroid backup!
The AS kernel is meant for the crazy ones. People who come from an asylum, those from the Note 1 know I am crazy, so this was meant for them. If there is a demand for the 7100 I will build that as well. I am not responsible if you are able to cook bacon on your device after running. It features up to a 1.920ghz over clock, and 640ghz on the GPU, it will go up, however for the moment we will run with 640. The phantom bug is that voltages cannot be set with SetCPU. Neither myself nor gavin know why. The code is spot on. So we don't get it. Lol. The source code is on github.com/glewarne
Kernel Features
- Built from official GT-N7100 sources
- 1.6 / 1.8ghz auto scaling
- Optimised VM memory settings, and global readahead
- Auto-rooting of any rom when flashed, even stock
- init.d script support
- CPU Voltage support through 3rd party apps
- Modified GPU DVFS utilisation steps for maximum GPU performance, far better than stock (this is NOT overclocking!)
- No logging / debugging of any kind for higher performance
- Decreased CPU frequency transition latency
- CRC32 slicing-by-8 algorithm
- SLUB allocator
- PEGASUSQ governor (default, others available)
- NOOP schedular, (default, others available)
- +50mb more free ram compared to all other kernels
- lots of other minor tweaks and changes
- ODIN TAR and CWM ZIPS available for all versions
- TouchWiz roms only
Download - Current Version v1.00
For N7105 (LTE) phones - Links pulled
The latest AsylumCore versions can be found - link pulled
Changelog
Asylum 2.11
-fixed 640 gpu clock(it works now!)
-switched to google 4.7 toolchain
-Note2Core STD, OC remain unchanged. AsylumCore EX and AS versions updated with 640 GPU clocks.
2.10
- Rebuilt from new N7100T source, released Dec 3rd
- All rotation issues in 4.1.2 fixed
- GPU steps reworked for better speed and responsiveness
- Built with linaro 12.11 GCC toolchain, with -O3 optimisation level
- lots of other internal changes
AsylumCore V2.01 - source on github now - github.com/antiochasylum/note2core_asylumcore_note2kernel
- version with *733* in file name is the 733 GPU @ 1150mV
- based off new source code 7100T
- compiled using latest linaro tool chain
- tweaked gpu scaling
- ro.secure=0 - I was tired of typing mount -o remount,rw -t /dev/block/mmcblk0p13 /system everytime to push a modified APK
- voltage bug still present
AsylumCore 1.339
- 1.920 CPU over clock
- 640 GPU clock
- other optimizations
v1.05
- Fixed Voltages
- Other minor changes
- Source is now on github - github.com/glewarne
v1.02
- Fixed video recording
- Added custom boot animation support, to use place desired boot animation in /system/media under *bootanimation.zip*
v1.01
- Fixed video playback for some users.
v1.00
- Initial release
Source Code
Click here
Credits and Thanks
sswagonman for being the bravest of souls, and a good friend
g.lewarne for his encouragement, help and support and friendship
phjz for coding help
Some parts of my code changes can be attributed to the following - Entropy512, franciscofranco, hardcore, gokhanmoral, AnderiLux
If I have forgotten anyone, let me know and ill add you to the list!10
The voltage bug is only present in the AS versions...
We are talking about this at the moment. I have a sprint kernel to test when I get home from vacation.
Also new source code had been pushed, lots a small fixes. I'm running v3.01 at the moment
They will be released to the masses soon.5The author completely disregards that the US versions have some hardware changes to them and using the 7105 kernel image on this device can be potentially dangerous as the GPIO pins between the US versions and the international version are different and things like battery charging can break. There are several power and charging differences between the two. It's lucky that this is only the AT&T version as on other carriers it would also break sound and volume. Use at your own choice but it's not something to be recommended.
I'd also like to inform some would-be users on some facts about this work.5
Very compelling argument. This is the kind of stuff we look for for support.
I'll get with gavin about. I cannot guarantee anything, however I will talk about it, only because of this comment.4
It already supports the 64 gig, just not exFAT format. Which is beyond me why people need a 64gig SD card in their PHONE.
Me and gavin both don't use exFAT so its hard for us to test it.
As for those who are wanting "MORE" from your device. I have a treat for you, hopefully by this weekend I will be releasing an "asylum edition" version of the kernel(compiled by myself), which will feature an OC up to 2.0 and GPU @ 733. I believe 733 is a sweet spot, there is no need for 800, it netted me about 1 fps better over 733, where 733 is about 6-7 frames faster than 640. I've been testing it, and there is no real significant battery drain.
However the 2.0 clock on the CPU, I will say 80% of you wont be able to run. My phone runs it, all day long. Guess I got a super chip lol.
New posts
-
Question S24 Ultra - call recording - possibility of changing CSC ?
- Latest: balavigneshyolo
-
