528MHz sounds a bit better.
What does the "pm.sleep_mode=2" do?
Ive been wondering the same thing, mostly.
Can anyone elaborate on the different values for 'pm.sleep.mode'?
Thanks!
http://xdaforums.com/show...03#post9399203
http://xdaforums.com/show...03&postcount=5
edit: found this
http://www.androidonhtc.com/wiki/Boot_Options
0 - Power Collapse Suspend
1 - Power Collapse - __Provides best power savings__
2 - Apps Sleep
3 - Slow Clock and Wait for Interrupt (default)
4 - Wait for Interrupt
i see suggestions for "ro.ril.disable.power.collapse=1" and "pm.sleep_mode=1". is this counter intuitive? according to some more sites, pm.sleep_mode=2 is where its at...could anyone elaborate? thank you!
Sleep Modes: (pm.sleep_mode=) in the startup.txt
This is supposedly for topaz/rhodium that I found on the xda wiki:
* '4' will do "wait for interrupt", no change in arm11's clock or voltage
* '3' will do "wait for interrupt and ramp clock", the arm11's clock is lowered to 20MHz instead of 300-500, and voltage is lowered too.
* '2' will do "app sleep", arm11 is still on, but put into low power mode (registers are still saved)
* '1' and '0' will totally power off the arm11 (so we have to restore registers and things ourself), don't know the differences between them