[ICS:CM9:HYBRD] PARANOIDANDROID [1.6a, True HybridMode, Size & UI on Per App Basis]

Search This thread
By:
Advanced…
O

Octhellion

Senior Member
Aug 13, 2011
58
4
fil--21 said:
yesterday i install paranoid rom for the first time ...but during the day i had 2 SODs ..so i went back to root GB and install all over again by the guide in the faq...but today i overslept cause my phone didn't wake me up, i was late to work...so can anybody just tell me what could be the reason for SODs , i don't wanna give up in ICS ...could be the radio or is that rom cousing this ...please help:(
Click to expand...
Click to collapse

Use Wake Lock as a temporary fix if you rely on your smartphone as an alarm clock.
 
  • Like
Reactions: fil--21
mbudh

mbudh

Senior Member
Nov 23, 2006
155
38
Ciputat
fil--21 said:
yesterday i install paranoid rom for the first time ...but during the day i had 2 SODs ..so i went back to root GB and install all over again by the guide in the faq...but today i overslept cause my phone didn't wake me up, i was late to work...so can anybody just tell me what could be the reason for SODs , i don't wanna give up in ICS ...could be the radio or is that rom cousing this ...please help:(
Click to expand...
Click to collapse

In my experience, SOD caused by low voltage in the lower clock. Sometime changing the voltage 1 or 2 steps higher can fix it. Use custom kernel with undervoltage capabilities and overclock application to change that.
Some people fix SOD by increasing the low clock. default lowest clock is 200MHz and increase it to 400MHz or 500MHz.
Sometime clean install the ROM fixes SODs. Here you need to flash safe kernel, wipe all and then flash again Paranoid.
 
Last edited:
A

aiteampl

New member
Aug 25, 2009
2
0
Szczecin
www.aiteam.pl
I love Paranoid.. its great ROM.

unfortunately having small issues. sometimes the mobile will freeze. sometimes once in an hour sometimes 2 -3 times a day. any ideas or suggestions?
Is that have anything to do with the kernel?
 
J

Jonous

Senior Member
Jan 12, 2008
581
62
AA1973 said:
[IRONY]
To get S-Note properly working you'll need the following lib modules
System/framework/touchwizz/missinginaction/s-note
System/framework/wtf/thereisnotouchwizz/oncm9
Remember to fix permissions... And making a Screenshot using your S-Pen will be possible as well.
[/IRONY] (CM9)
Click to expand...
Click to collapse

Hahaha good one! Especially the "fix permissions" stuff :D:D:D
 
  • Like
Reactions: AA1973
alxwlc

alxwlc

Senior Member
May 24, 2011
516
97
Kuala Lumpur
Can I backup my current apps via TB and restore it after flash to PARANOIDANDROID v0.2

Currently Im on RocketROM ICS v4.1

Hope someone can answer this. Thx
 
jackkarthickg

jackkarthickg

Senior Member
Jan 8, 2012
163
81
Chennai
alxwlc said:
Can I backup my current apps via TB and restore it after flash to PARANOIDANDROID v0.2

Currently Im on RocketROM ICS v4.1

Hope someone can answer this. Thx
Click to expand...
Click to collapse

Ya u can, I was RRv3... What u should do is..

-Take a Nandroid BackUp of Current ROM & UserApp BackUp with Titanium...
-Flash GB with Odin & Root it....
-Flash Paranoid ROM & Hybrid Gapps, Then only Do a Factory Reset/Wipe cache & Dalvik Cache
-Reboot & Install Titanium Backup.. Restore all ur User app with data....

Eureka You Did It :D
 
  • Like
Reactions: alxwlc
F

fil--21

Senior Member
Jul 19, 2009
158
4
mbudh said:
In my experience, SOD caused by low voltage in the lower clock. Sometime changing the voltage 1 or 2 steps higher can fix it. Use custom kernel with undervoltage capabilities and overclock application to change that.
Some people fix SOD by increasing the low clock. default lowest clock is 200MHz and increase it to 400MHz or 500MHz.
Sometime clean install the ROM fixes SODs. Here you need to flash safe kernel, wipe all and then flash again Paranoid.
Click to expand...
Click to collapse

OK I will try this also...cause I really like this rom ....I really don't wanna go back to stock GB...I would rather buy new alarm clock...:)
 
alxwlc

alxwlc

Senior Member
May 24, 2011
516
97
Kuala Lumpur
jackkarthickg said:
Ya u can, I was RRv3... What u should do is..

-Take a Nandroid BackUp of Current ROM & UserApp BackUp with Titanium...
-Flash GB with Odin & Root it....
-Flash Paranoid ROM & Hybrid Gapps, Then only Do a Factory Reset/Wipe cache & Dalvik Cache
-Reboot & Install Titanium Backup.. Restore all ur User app with data....

Eureka You Did It :D
Click to expand...
Click to collapse
Ok will try that. Thanks a lot for it.. ;)
 
jimmod

jimmod

Senior Member
Nov 9, 2010
254
334
I notice on Whatsapp & Line messenger, changing it's DPI (in my case set it higher than global density) cause it get incorrect screen size on some feature.

When I view a picture sent, the picture-viewer view seems getting wrong height & width causing it display(resize) the picture incorrectly(to big?) so the picture is full screen but cutted(cannot see the right side of the pic)
 
THUDUK

THUDUK

Senior Member
Aug 12, 2007
1,685
154
eastbourne
Google Pixel 4a
Do you think this ROM will, have full S-Pen functionality soon?

Just when I was using this ROM, however much I loved it, the S-Pen didn't ever feel as smooth and responsive as a Samsung based ROM

Also does Swype work ok?


Sent from a galaxy note far far away
 
CrisperNeO

CrisperNeO

Senior Member
Sep 13, 2006
147
20
AA1973 said:
[IRONY]
To get S-Note properly working you'll need the following lib modules
System/framework/touchwizz/missinginaction/s-note
System/framework/wtf/thereisnotouchwizz/oncm9
Remember to fix permissions... And making a Screenshot using your S-Pen will be possible as well.
[/IRONY]

Paranoid Galaxy Note N7000 - PARANOID ANDROID (CM9)
Click to expand...
Click to collapse

Good one, I almost bought it ;)
 
  • Like
Reactions: AA1973
M

mauaus

Senior Member
Oct 22, 2010
915
56
Can anyone point me too the latest kernel that does not have the lockscreen lag please??

sent from CM9 Galaxy NOTE
 
Last edited:
  • Like
Reactions: a43
luke1404

luke1404

Senior Member
May 18, 2012
670
369
Reading
AA1973 said:
[IRONY]
To get S-Note properly working you'll need the following lib modules
System/framework/touchwizz/missinginaction/s-note
System/framework/wtf/thereisnotouchwizz/oncm9
Remember to fix permissions... And making a Screenshot using your S-Pen will be possible as well.
[/IRONY]

Paranoid Galaxy Note N7000 - PARANOID ANDROID (CM9)
Click to expand...
Click to collapse

Oh the sarcasm, lowest form of wit you know!!

Yes we all know it was a stupid question to ask, if he used the search feature he would have seen this a million times however your irrelevant and stupid reply is just clogging up the thread.

Nothing constructive to say.....then don't say anything. You were a noob once remember, we all were! ;)

Rant over and sorry for wasting this space with this post.
 
mfractal

mfractal

Senior Member
Aug 1, 2009
1,717
534
Londrina
luke1404 said:
Oh the sarcasm, lowest form of wit you know!!

Yes we all know it was a stupid question to ask, if he used the search feature he would have seen this a million times however your irrelevant and stupid reply is just clogging up the thread.

Nothing constructive to say.....then don't say anything. You were a noob once remember, we all were! ;)

Rant over and sorry for wasting this space with this post.
Click to expand...
Click to collapse

the difference is that when i was a noob i mostly read instead of posting stupid questions. That's what you get when you do....
 
  • Like
Reactions: AA1973
You must log in or register to reply here.

Similar threads

I
[ROM] PARANOIDANDROID 2.51 | Per-App COLOR (newest PA invention), Dpi & UserInterface
Replies
3K
Views
731K
lukasspro777
lukasspro777
beerbong
[ROM] ParanoidAndroid 4+
Replies
3K
Views
867K
L
Lister Of Smeg
H
[KERNEL] SpeedMod N7000 ICS [K3-15 CWM CIFS ROOT / NO-ROOT]
Replies
2K
Views
622K
Kael ruch
Kael ruch
novic_dev
[ROM][ICS][20-09-12][1.2] AniDroid-N7000 (CM9.1 | 3.0.43 | SLQB | OC)
Replies
758
Views
205K
A
amangulati75
sixstringsg
[ROM] [ICS] Android Open Kang Project - GT-N7000 - build 40
Replies
2K
Views
297K
JT1510365
JT1510365

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 470
    I
    imilka
    [ICS:CM9:HYBRD] PARANOIDANDROID [1.6a, True HybridMode, Size & UI on Per App Basis]


    paranoidxqkmy.png

    ​

    Wanna be up to date with ParanoidAndroid team news?, click here, and visit our webpage!​


    paranoid_impressions.png



    sl1.png


    13.png
    14.png
    15.png


    sl2.png


    16.png
    10.png
    12.png


    sl3.png


    7.png
    8.png
    9.png


    sl5.png


    20.png
    21.png
    22.png


    sl4.png


    17.png
    18.png
    19.png


    sl6.png


    23.png
    24.png
    25.png



    . .

    paranoid_notabf8j0a.png

    This is an ongoing developer project to make way for a modification that will entirely transform your device, but retain the aesthetics and the experience of your phone. I know you've seen tablet mode roms before, they change two lines in your build.prop file which you could easily edit yourself in seconds and maybe throw a keyboard in there to make it work better. It's a start, but this ain't enough. This thing has potential, but it is wasted the moment you try to stuff a full blown tablet into your poor phone. Yet we all know our high res phones can very well handle more than silly 1-column layouts. So the magic must be in between somewhere, a place that Google must have overlooked and left blank. Yes, this rom strives to drop your device into tablet mode, but it won't stop there, it will reshape and redefine ICS to make it all a usefull addition and not just a cute novelty. we're calling it: Hybrid Mode, best of both worlds.

    Donations to CM http://forum.cyanogenmod.com/donate , to molesarecoming http://xdaforums.com/donatetome.php?u=4491046, to D4rKn3sSyS http://xdaforums.com/donatetome.php?u=3484876
    ​



    paranoid_instructions4zkp3.png




    • DON'T flash FROM ANY SAMSUNG ICS OR ROMS BASED ON SAMSUNG KERNELS (my CM9, AOSP, etc)
      Flash any stock GB rom with odin / or any GB kernel [instructions] root device [instructions] and reboot into recovery once again before flashing this
    • Install Rom: http://d-h.st/3cK
    • Install HYBRID Gapps: http://goo.im/gapps/gapps-ics-20120429-signed.zip
    • Wipe caches, factory reset is a must if you're coming from another rom than CM9
    • If your statusbar is gone after the first reboot: longpress Powerbutton > Toggle Statusbar
    • Reboot and edit your Apps Dpi under Settings/Paranoid Settings/P.A.D. Hold the powerbutton to see the new fullscreen-togglebutton



    paranoid_hintsu4kjw.png

    • FAQ & HELP - Read before asking!
    • Go to Settings, System, Font size, set it to NORMAL
    • Check "Auto Hide" in Settings, System, Statusbar, to finally get Fullscreen (or Hold power button, and press "Toggle StatusBar")
    • Launcher Settings: margins: SMALL (If youre using Apex / Nova), show permanent searchbar: YES, resize all widgets: YES, Wallpaper scrolling: OFF



    paranoid_troublernbsn.png




    paranoid_creditsjkkeh.png


    View
    142
    I
    imilka
    paranoid_changelog.png


    v1.6a

    Stable final ICS PA release.

    v05

    Based on latest CM9 nightly
    Improvements on frameworks, fixed for once and finally all DPI related crashes
    SystemUI mode can be configured now
    Cleanup and speedup of hybrid code via native libs (I'd say 25%)
    A lot more of changes, you can check them here: https://github.com/ParanoidAndroid

    v04
    Gps fix, i hope it works fine (i just catched 14 sats)
    Long-pressing menu button shows recent app lists as before
    Some adjustments
    Improvements on OTA app, scheduled checkups
    Improvements on Backup app, now it automatically launches on startup after you install a newer (or older) version
    Hybrid speedup, less lag, considerably faster list scrolling when pad/pal is in action
    Keyboard scaling, an androids first
    PAD/PAL bugfixes for apps that still crop images in lower dpis
    Settings revamp, speed preferences to switch between modes without having to set up anything, less clutter
    Trebuchet extras: 3x4 widgets, speed dial menu button, ... and some weird rocket button which im sure will be very useful to most of you
    Pad.prop revamp, new preferences that should pretty much nail it. Im sorry but this trashes your old settings again, do not attempt to restore them unless you do it in a text editor

    v03

    New Hybrid code, keyboard troubles should be gone, apps that crop images or display weird, that should be gone aswell
    PAD/PAL work in phonemode 100%, no weird toggles and stuff like that. you get full tablet apps without caveats
    Settings cleanup, most of the garbage dpi options are gone, should be more intuitive - i ask you to not bring your old pad.props though some things changed. if you know what you do take a look and edit by hand
    Trashed our LatinIME repo - not needed anymore
    Speed improvements, all launchers are buttersmooth now
    Has all the latest CM9 additions
    New PAD/PAL code allows system-scaling finally, that means you can scale the lockscreen, dialogs, toasts, etc.
    Trebuchet comes with new menu options: 4x4 grid grid folders, options for backgrounds, tablet effects
    New cool backup app for pad.prop, *maybe* even an OTA app, either 1.2 or 1.3
    New panel options and descriptions
    Hide status-bar clock doesnt hide HOLO clock in notification center
    Number of notification icons definable in settings
    Tons of fixes and improvements

    v02

    1) Included latest changes and fixes from latest CM9 nightly.
    2) New feature - Per App Layout, allows you to force each app to work in your desire mode with tablet or phone layout.
    3) Improved settings panel
    4) Fixed keyboard/camera/etc layout bugs, basically all layout bugs can be fixed using PAD/PAL settings.
    5) Home button long-press now works in tablet mode

    Included all settings/options from GS2 build like these:
    1) Ability to easily switch between tablet/phone mode
    2) Ability to enable/disable softkeys on both phone and tablet modes
    3) Lockscreen wallpaper, and vibration setting
    4) Statusbar Transparency
    5) Recent apps options + Sense recent apps layout mode
    6) Ability to disable physical keys
    7) Sound management panel
    View
    66
    I
    imilka
    Reuploading v02 package without format commands.
    I'm waiting for clarification of this situation from CM9 devs because their packages contain same update scripts and binaries.

    As for update - I'm hoping for today's evening if everything goes fine.
    View
    50
    S
    scourgeofgod
    Summary of Kernels - Updated 21/07/12

    monkeydrufy said:
    sorry guys,
    what is the best kernel to use with this rom?
    thanks
    Click to expand...
    Click to collapse
    ^^ As such there is no single commonly acknowledged "best" kernel for Paranoid Android.
    But i can list the choice available currently.

    1)Kernel_CM9_RC2_20120719_CWM_Flashable
    The recovery is updated to latest version - CWMR 6.0.0.2, without the lag found in previous 5.5.x.x bundled with CM9 till now.Moreover performing a Nandroid backup is now super fast and is only 30-35mb large!, for a ROM which already has one fullbackup. It may also incorporate the 5.6.x.x protection of chainfire in recovery against emmc bug (maybe redundant in this case as CM9 already has protection against it).Finally its the release candidate 2 (RC2), so we can generally expect improvements in kernel characteristics compared to the bundled kernel of PA 0.5 (AFAIK its based on 10/7 nightly). This is assuming Imilka has not made any PA specific modifications to the bundled kernel to go along with the PA ROM - but this has to be confirmed.

    2)AniDroid (links below)
    This a version of CM9 kernel which supports Overclocking by NovicDev.It is super snappy and fast (quadrant scores maynot always show this). However, apps cannot be installed on SD card on this kernel(yet) - (imo, this is not a big nag as Note has lot of RAM). But this kernel is new and holds a lot of promise in its future iterations.
    AniDroid v5
    AniDroid v4

    3)Asylum BBQ Kernels
    This is a variation of AniDroid v4 - it has been optimised for framework of Asylum ROM - its fast and snappy with good battery life on Asylum ROM. No one reported its effects on PA 0.5. But i think it doesnt have the SD card installation problem of AniDroid.
    Asylum BBQ v19 - Based on CM9RC2
    Asylum BBQ v18 - Based on Anidroid v4

    4)Old CM9 Nightlies (links below) - as with all development, bugfixes frequently tend to break code somewhere else - so improvement is definitely palpable over long periods but is not guaranteed in immediate iterations. So if your latest kernel update has broken your previous good functionality (wifi,gps,battery etc) you can revert to an older kernel. However this zeroing onto the kernel which works for you is a trial and error process completely.

    Kernel_CM9_20120707_CWM_Flashable
    Kernel_CM9_20120708_CWM_Flashable
    Kernel_CM9_20120709_CWM_Flashable
    Kernel_CM9_20120710_CWM_Flashable
    Kernel_CM9_20120712_CWM_Flashable
    Kernel_CM9_20120715_CWM_Flashable
    Kernel_CM9_20120717_CWM_Flashable
    Kernel_CM9_20120721_CWM_Flashable - Recovery updated to 6.0.1.0 CWM

    5)Thor kernel v17 - it is a Kangbanged kernel (i.e palgarised from various sources without acknowledging the original devs - it is not opensource so you cant be sure of your privacy - your confidential passwords may get pasted over the net ! - lol) ,however it supports OC . Another nag with it is it has a "Thor" customrecovery bundled with it - its compatiability and performance with previous nandroid backups is unknown. IMO AniDroid kernel is as good if not better. Only advantage of Thor is that its latest iteration incorporates some form of Spen offset correction - which is a novel feature and deserves appreciation. Iam not going to link to it as its against xda rules.

    6)Bundled Kernels
    After flashing one of the above if you want to revert back to the kernel originally bundled with your PA rom you can choose it below(incase you dont have a nandroid backup).
    ParanoidDroid kernel v0.5
    Staxxtanium 1.6aF

    Quick walkthrough on flashing kernels
    1)Backup your ROM.
    2)Flash Jbroid Kernel cleaning script.
    3)Wipe Cache
    4)Wipe Dalvik
    5)Flash Kernel.

    Edit: Special Thanks goes to Chasmodo for extracting and linking up most of the kernels. Dont forget to thank him in one of his ubiquitous posts for this.
    View
    40
    I
    imilka
    Just to let you know - I'm working on an update.
    View

New posts