"SDHC card patch WM5 and WM6" working

Search This thread

Menneisyys

Retired Moderator
Jul 25, 2005
5,511
138
www.winmobiletech.com
I installed first the certs.cab and afterwards the sdhc.cab.
Now, I see my SDHC card, but only the 4 GB, not the whole 8 GB.

My other problem is, that I'm not able to replace the two dll files (using active sync) --> reason: the file is in use and can not be replaced.

my device:
FSC T810 with GERMAN WM5 (Smartphone Edition)
8 GB CLASS2 Hama storage card

Copy them to for example the storage card and, then, use the local (!) Resco or File Explorer to copy them to \Windows
 

roisagi

Senior Member
Jun 14, 2006
536
8
i tried it on my JASJAM WM5:
doesnot work corectly:
after device sleeps - i turn it on again - and it cannot access "start" menu.
only phone works and "today" works -
everything else gets stuck:

any ideas?
 

hblago

Member
Sep 27, 2007
32
0
Porto Alegre
If Resco can't replace them while they are in use you could try:

1) rename the two files in \Windows\ from .dll to .old
2) then copy the new files to \Windows\ and soft reset
3) then delete the two .old files

Is easy. You install SDHC.cab. But DON'T RESTART. Replace the files, and after install certs.cab. Now, you get a soft reset.

I proceed this way. However, my card don't work :(
 

yixiar

Member
Mar 25, 2007
46
0
I've done fellowing your instruction.

it does NOT work in my MDA WIZARD.

Waiting for more good news :)
 

gjeremie

Member
Jul 9, 2007
47
0
acer n311

hi

Don't work on acer n311 Wm5
After installation can't see normal SD or SDHC

wait for another update...
 

MHarris48

New member
Nov 6, 2007
4
0
Los Angeles
Partially Works on WM5 8GB Card

Disappointed with WM6's ActiveSync 4.5->VPN->Exchange functionality so flashed back to WM5 & of course WM5 does not support my 8GB Sandisk card like WM6 did.

I installed the patch but it looks like the max it recognized is 4GB?:confused:

The only issue is the amount of memory it is reporting via settings|memory:
Total = 3,686.50 MB (should be ~ 8,000 MB)
In use = 2,493.75 MB
Free = 1,192.75 MB
 

Steven855

Senior Member
Disappointed with WM6's ActiveSync 4.5->VPN->Exchange functionality so flashed back to WM5 & of course WM5 does not support my 8GB Sandisk card like WM6 did.

I installed the patch but it looks like the max it recognized is 4GB?:confused:

The only issue is the amount of memory it is reporting via settings|memory:
Total = 3,686.50 MB (should be ~ 8,000 MB)
In use = 2,493.75 MB
Free = 1,192.75 MB
Perhaps WM5 partitioned the sdhc card into 2 4gb paritions?
 

bellec

New member
Nov 27, 2007
1
0
I got the patch kinda working??? Need help!

This is my first post, so I hope this isn't a totally newbie question. I have the new Verizon Samsung 760 and just purchased a 6gb microSDHC card.

My phone wouldn't even see this card, but my computer no problem.
I found this site and found the patch from the 1st post. I was able to only run SDHC.CAB and Certs.CAB.

My phone now sees the card at 1719MB.

From the read me file on patch:
SDHC Driver

1) Install SDHC.cab
2) Overwrite /Windows sdbus.dll sdmemory.dll
3) Install Certs.cab

Soft reset.

How do I do step 2???
When I performed steps 1 and 3, all I had to do was click on the application and my phone loaded it. When I tried to do step 2 and click on sdbus and sdmemory I get this error "There is no application associated with "sdbus".
I'm sure this is why my phone is not reading the proper size.

Thanks in advance!
 

selangkahlagi

Senior Member
Dec 17, 2006
242
0

basmoq

New member
Nov 27, 2007
1
0
This is confirmation that the file labeled sdhc.cab works for the HP IPAQ HX2495b I can view my 4gb card at full capacity, and can also still view my older 2gb cards!!!
 

speedpete

New member
Oct 31, 2007
1
0
LG KS 20

Hi there.
I just tested the sdhc patch and it worked after some tries on my LG KS20.
But just for 4 GB Sandisk cards.

And after some warm resets the dll files get lost and I have to redo the hole process.

Anyway, many thanks for helping me!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    SDHC Success Axim X51v

    Though it was not easy going, this thread did eventually prove as useful as I'd hoped. I recently purchased a Dell Axim X51v and was interested in adding SDHC support to it without flashing to a WM6.1 ROM (though I plan to eventually). After slogging through this thread (I pretty much read every post up to page 39!) I was successful at adding full SDHC capabilities to my X51v with the stock WM5.0 rom that it came from Dell with. This is how I did it.

    I spent about 3 hours working with SDHC_WM6WM5.cab, SDHC_v071227.cab, SDHC.777.cab but none of these worked, I was able to replace the .dll files (which is manually required by 2 of those .cabs) by using the rename and replace trick that is explained numerous times earlier in this thread. I tried every combination of installing .cabs, replacing .dlls and soft reseting that I could possibly try all to no avail. As I read on further in the thread I did come across SDHC_DRIVERS_FOR_C550_AND_N560_BY_GreateVK_AND_FreePK. I originally disregarded this since right in its name is says it is for devices I am not working with. I don't even know what a C550 or an N560 are. Along I went reading further and reading more about people having success with SDHC_DRIVERS_FOR_C550_AND_N560_BY_GreateVK_AND_FreePK working on other things than what it is intended for. As a last ditch effort I figured what the hell I'll give it a try since it can't hurt. I ran the install and soft reset just as is instructed and did I just about fall out of my chair when I put in my HP 16GB SDHC card and it recognized it! 15.whatever it was GBs! I was extremely pleased.

    I saw a few people along the way inquiring about whether anything worked with and Axim X51v, hopefully they figured it out themselves or they may come across my post. Thanks to all the posters that help me acheive success in the end!

    Some things to note: I had cleared all the previous sdhc related cabs from my Ax. This was a bit of a tricky process. You have to reinstall the .cab (that you want to remove) which will tell you that it must uninstall the previous install first which is followed by a soft reset prompt. After the soft reset you can use the remove programs utility to fully remove from the program from the system. If you use the remove programs utility first it will tell you that it can't be fully removed in which case you have to fully reinstall and then follow the process that I listed anyhow. This took me a few tries to figure out, what a pain in the ass! I also replaced the stock .dlls in the Ax's windows directory so that it was back to the way it was before I tried any of the sdhc .cab files. I did all this before I ran SDHC_DRIVERS_FOR_C550_AND_N560_BY_GreateVK_AND_FreePK. I am using a windows vista system and transfered the SDHC_DRIVERS_FOR_C550_AND_N560_BY_GreateVK_AND_FreePK file directly onto the Ax's built in memory using the usb system to just copy and paste them to it like it was another storage card, I did not in anyway use the Windows Mobile Device Center (the vista compatible replacement for active sync).

    I know this should help anyone looking to add SDHC support to an Axim X51v without flashing to a WM6.1 ROM, I don't know if it will help anyone else, but hopefully you will enjoy my lengthy post. :D

    I stopped reading every page after I got it working so someone may have already posted about this previously in the 20 or so pages that I did not read.
    1
    Hi.

    I've applied the SDHC patch to my Loox 520. Simply installed the SDHC.cab and it asked to "reboot". Confirmed that, and after the reboot the SDHC (4 GB) was detected correctly. But now I have the problem that performance is very poor when accessing the sd card. Starting e.g. Navigon now takes 3 times longer than before. Also switching back to the 2GB sd card makes no difference.

    I removed that SDHC patch via "Remove Programs", it was called "HTC SDHC" IIRC, and after an additional reboot, the performance of the 2gb card is back to normal.

    Did someone encounter similar problems? for the record: I did NOT softreset the 520 though pressing the standby button and reset button (with pen). But I don't think that's a problem since the .cab made a soft-reset by itself and the card worked basically.

    Any hints?

    I assume you are using one of the patches on the first page of this thread? If so, have you tried the Loox N560 patch for SDHC. It seems to work on lots of other makes and models as well as Looxes. You have to do a soft reset after you install it. And you can uninstall it, if it does not work for you. It is here
    http://xdaforums.com/showthread.php?t=388364

    Let us know if it works, please?