[Resolved] SIM not allowed MM#3

Search This thread

Landmine

Senior Member
Jun 24, 2008
252
11
I've looked all over for this and I finally found it. This is for the Samsung Rugby II A-847

I wanted to post it here because people tend to google "<phone problem> xda" when they really need help.

1. Type in *#0523#
2. Press # 3 Times to get to the main menu, 1 second delay between presses
3. Press 8 (Phone control)
4. Press 3 (NAS control)
5. Press 3 again (UIM class)
6. It should turn out that the setting for the UIM class should be GSM.

If it was GSM to start with follow these steps:

1. From the main menu check the SIM Information.
2. The card capability and the EF category should be USIM.
3. If it is not mess around with it.

-----------------

Posting this for anyone down the road that will see that evil "SIM not allowed MM#3" message
 
G

geulanow

Guest
Tried it, but the menu looks weird

I've looked all over for this and I finally found it. This is for the Samsung Rugby II A-847

I wanted to post it here because people tend to google "<phone problem> xda" when they really need help.

1. Type in *#0523#
2. Press # 3 Times to get to the main menu, 1 second delay between presses
3. Press 8 (Phone control)
4. Press 3 (NAS control)
5. Press 3 again (UIM class)
6. It should turn out that the setting for the UIM class should be GSM.

If it was GSM to start with follow these steps:

1. From the main menu check the SIM Information.
2. The card capability and the EF category should be USIM.
3. If it is not mess around with it.

-----------------

Posting this for anyone down the road that will see that evil "SIM not allowed MM#3" message

Hi. I was getting this message on a Samsung SCH-I337. The *#0011# works, but instead of the menu you show, I get a different one and do not know how to use it.

It looks like this (cant upload a screenshot so I'll just duplicate it:

Service Mode
RRC: DCH, Band 1
MCC-MNC : 425 - 02
RX: 10788,RI: -85,CID:53d447
TX: blah blah
Eclo: blah RSCP: blah
Speech Ver: FR FR FR
L1 : DCH, PSC: 186
Drxcycle: 64, CQI: 0, Sam: 0
No SIB19

HSDPA 0, HSUPA 0, HSPA+ 0
AMR Undef
PA Gain State : 0
IMEI CERTI : NA

if you click on the menu button then a menu pops up that says:
END
Back
Key Input
Select
Help WiFi

Do you or anyone have any idea how to use this menu?