Codename Android {CNA}[DISCONTINUED] {unlocked} 5/29/2012

Search This thread
By:
Advanced…
FernBch

FernBch

Senior Member
Sep 14, 2009
4,269
1,959
Alamogordo, NM
Google Pixel 3 XL
OnePlus 8 Pro
OK, Here it is. I'm on Sprint CDMA and have no special apps. These APNs work for me from a fresh install with no extra apps running. Mind you, I am currently on Paranoid 1.6, but my MMS worked on CNA, AOKP, AOKPCB, and Paranoid Android. I can send and recieve pic, mutli-part sms, etc.

First APN:

Name: CDMA
APN: 1
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mms.sprintpcs.com
MMS Proxy: Not Set
MMS Port: Not Set
MCC: 310
MNC:120
Authentication Type: Not Set
APN Type: mms,default,supl
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4/IPv6
APN enable/disable: APN Enabled (box checked)
Bearer: Unspecified

Second:

Name: CDMA
APN: Production
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mms.sprintpcs.com
MMS Proxy: Not Set
MMS Port: Not Set
MCC: 310
MNC:120
Authentication Type: Not Set
APN Type: mms
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4/IPv6
APN enable/disable: APN Enabled (box checked)
Bearer: Unspecified

Third:

Name: USCC
APN: Internet
Proxy: Not Set
Port: 80
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mmsc1.uscc.net/mmsc/MMS
MMS Proxy: Not Set
MMS Port: 80
MCC: 310
MNC:120
Authentication Type: PAP or CHAP
APN Type: mms
APN Protocol: IPv4
APN Roaming Protocol: IPv4
APN enable/disable: APN eEnabled (box checked)
Bearer: Unspecified

I can't remember what thread I read, but it was in one of them that were talking about APNs. I basically just kept at trial and error and this works for me. Like I said earlier I can send and recieve multi-part sms, picture messages, etc. Remeber to restart after changing. These don't disappear on me either.

Hope this helps.
 
Th3Bill

Th3Bill

Senior Member
Feb 6, 2012
6,307
9,280
Where I Am
FernBch said:
OK, Here it is. I'm on Sprint CDMA and have no special apps. These APNs work for me from a fresh install with no extra apps running. Mind you, I am currently on Paranoid 1.6, but my MMS worked on CNA, AOKP, AOKPCB, and Paranoid Android. I can send and recieve pic, mutli-part sms, etc.

First APN:

Name: CDMA
APN: 1
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mms.sprintpcs.com
MMS Proxy: Not Set
MMS Port: Not Set
MCC: 310
MNC:120
Authentication Type: Not Set
APN Type: mms,default,supl
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4/IPv6
APN enable/disable: APN Enabled (box checked)
Bearer: Unspecified

Second:

Name: CDMA
APN: Production
Proxy: Not Set
Port: Not Set
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mms.sprintpcs.com
MMS Proxy: Not Set
MMS Port: Not Set
MCC: 310
MNC:120
Authentication Type: Not Set
APN Type: mms
APN Protocol: IPv4/IPv6
APN Roaming Protocol: IPv4/IPv6
APN enable/disable: APN Enabled (box checked)
Bearer: Unspecified

Third:

Name: USCC
APN: Internet
Proxy: Not Set
Port: 80
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mmsc1.uscc.net/mmsc/MMS
MMS Proxy: Not Set
MMS Port: 80
MCC: 310
MNC:120
Authentication Type: PAP or CHAP
APN Type: mms
APN Protocol: IPv4
APN Roaming Protocol: IPv4
APN enable/disable: APN eEnabled (box checked)
Bearer: Unspecified

I can't remember what thread I read, but it was in one of them that were talking about APNs. I basically just kept at trial and error and this works for me. Like I said earlier I can send and recieve multi-part sms, picture messages, etc. Remeber to restart after changing. These don't disappear on me either.

Hope this helps.
Click to expand...
Click to collapse

This was JB? Or ICS? All the ICS builds have working MMS both ways....we're having difficulties with the Jellybean ones...

Unfortunately, these didn't work on CNA JB :(
 
FernBch

FernBch

Senior Member
Sep 14, 2009
4,269
1,959
Alamogordo, NM
Google Pixel 3 XL
OnePlus 8 Pro
ICS (PA1.6). Didn't realize you were asking about JB. I haven't given it a shot yet. Didn't think CNA was up to JB as it has not been continued. It was one of my favs and would probably be awesome if it was updated like the others.

No detraction from you work intended Th3Bill. It is also awesome. I've tried many of your builds and they are all nice!!
 
Last edited:
Th3Bill

Th3Bill

Senior Member
Feb 6, 2012
6,307
9,280
Where I Am
FernBch said:
ICS (PA1.6). Didn't realize you were asking about JB. I haven't given it a shot yet. Didn't think CNA was up to JB as it has not been continued. It was one of my favs and would probably be awesome if it was updated like the others.

No detraction from you work intended Th3Bill. It is also awesome. I've tried many of your builds and they are all nice!!
Click to expand...
Click to collapse

Check out the new thread :) CNA was brought back with JB. If it hasn't come back, then I am really confused that I have CNA JB running on my phone somehow...hee hee :D
 
You must log in or register to reply here.

Similar threads

jokersax11
[Ics] unofficial cm9 by jokersax 8/23/2012
Replies
10K
Views
1M
P
pgriffinsc
the2dcour
  • Locked
  • Sticky
[PUDDING] Photon/Electrify Pudding bootloader unlock [Updated: 12/10/2011]
Replies
509
Views
303K
H
herach
spleef
  • Locked
  • Poll
[MIiui.us]MIUI/ICS port [unlocked] 5/19/2012
Replies
2K
Views
194K
Moscow Desire
Moscow Desire
Th3Bill
[ROM][JB] CNA 3.6.6 for Photon {AROMA}
Replies
1K
Views
111K
X
xfr3386
E
  • Sticky
[ROOT] Photon Torpedo, dockless root access
Replies
390
Views
250K
D
deshwani

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 19
    spleef
    spleef
    HELLO...
    this is a port of codename android [CNA] from the atrix nightly and the nexus s 4g nightly found here: http://codenameandroid.org/
    using jokersax cm9 as my base..... the man can be found here: http://www.jokersax.com/
    Brought to you by:

    TEAM MOTO TEGRA


    what doesnt work:
    you tell me!


    MUST BE UNLOCKED AND ON 198_6 OR 198_7...THANKS!!!!!


    instructions: for best results fresh install is recommended

    * fresh install process:
    reboot to recovery use jokers recovery cwmv3 http://www.jokersax.com/developer-pa...enmod9-photon/
    use th3bill's wipe all zip http://www.mediafire.com/download.php?09s7943ps87rwed ...... or
    format system, data, cache
    flash rom, flash rom a second time, flash gapps, flash kernel optional, fix permissions, and then reboot phone

    * to flash over/update:
    use th3bill wipe cache zip http://www.mediafire.com/download.php?t0ctb4am6ftbw42 ..... or
    wipe cache and dalvick cache
    flash rom, then flash rom a second time, flash gapps, flash kernel optional, fix permissions, and then reboot phone

    * if you run into some fc's reboot into recovery wipe dalvick cache and fix permissions the reboot phone


    mms troubles? follow these steps:

    apn edits: after you boot for first time and get settled in open voice dialer and say apns then edit this information as well as delete/remove the cdma0 apn settings only need two cdma1 and uscc

    1st one:
    Name: CDMA
    APN:1
    MMSC: http://mms.sprintpcs.com
    MCC: 310
    MNC: 120
    APN type: mms
    APN protocol: IPv4/IPv6
    APN roaming protocol: IPv4/IPv6

    2nd:
    Name: USCC
    APN:internet
    Port: 80
    MMSC: http://mmsc1.uscc.net/mmsc/MMS
    MMS port: 80
    MCC: 310
    MNC: 120
    Authentication type: PAP or CHAP
    APN type: mms
    APN protocol: IPv4/IPv6
    APN roaming protocol: IPv4/IPv6

    Reboot after setting up Both of them.

    USCC apns: [thanks byte]
    for mms to work with USCC
    you need to enter username and password.
    username is min@uscc.net
    password is min

    replace min with your actual min
    min is usually your phone number..
    delete all other apns
    and you should be good to go


    PLEASE READ!

    Some observations on tablet mode:

    *enable tablet mode:
    click on lcd mod app in app drawer then set to 144 allow root permissions
    accept the reboot, go back into the app after reboot and click the fix market button
    *enable larger fonts:
    Settings/Display/Font Size/Select Huge
    *Add button "menu"
    Settings/Interface/Navigation Button quantity: "4"
    Settings/Interface/Navigation bar/Button 4 Action & Icon: select "Menu"

    *have fun with your mini tablet full of tweaks!!
    *looks great in roation i would suggest trebuchet launcer..
    *to change back set your lcd Density back to 240 using same method above

    current build: based on jokersax cm9 6.9.1 and CNA rc2 released via twitter 5/12/2012

    currently i havent uploaded to jokers use goo for now

    CODENAME ANDROID LINK

    if jokers site is down can go to goo-inside.me look in devs/spleef

    please be sure to report your experience anything and everything..thanks


    MAJOR THANKS TO QBKING77 FOR HIS INSTALL AND REVIEW VIDEOS!!!!
    qbking77 youtube channel: http://www.youtube.com/user/qbking77/featured

    *How to install:
    http://www.youtube.com/watch?v=ZZvVQ7GpDFg

    *Review:
    http://www.youtube.com/watch?v=Db_7oyfX2w0
    View
    6
    qbking77
    qbking77
    How to install:
    http://www.youtube.com/watch?v=ZZvVQ7GpDFg

    Review:
    http://www.youtube.com/watch?v=Db_7oyfX2w0

    Hope you guys like them :)
    View
    3
    spleef
    spleef
    tommyb_ said:
    well jus now gettin to take a look at the thread. glad everyone seems pretty happy with it so far besides the camera, but spleef should have that fixed by now. (easy fix) but some good news is soon this will be built from source!
    Click to expand...
    Click to collapse

    joker has already built it from source but it had some issues in it too
    am still trying to fix it this time im using the nighlt from 4/20 so its updated .... this is what the issue is..
    i wiped everything as i always do during flashing test builds but some how after flashing (which goes fine) i reboot camera and music and speakerphones still busted and if i look in my system/lib/hw folder its full of olympus parts which are no where inside the zip i flashed ... lol still trying to figure out where they are coming from

    i can release 4/20 build right now but its same as the one thats released already....everything else works though...lol i have a few ideas still to try

    lol found the problem...look inside the gapps i provided.... wow.. full of olympus parts...lmao fixing now see what happens

    guess what shes fixed...
    camera check
    speakerphone ceck
    music check

    upping now with new gapps aS WELL


    OP UPDATED please report any and everything.... thanks
    View
    3
    Th3Bill
    Th3Bill
    spleef said:
    no.. I'm on it right now same zip I uploaded have been for over 24hrs.... not a problem that I haven't caused....

    what exactly happened?
    which zip did you use gsm/ or first posted zip?
    what recovery did you use to flash?
    have you changed any of the advanced/ development settings?
    can you send me a logcat?
    what method of wiping did you use prior to flashing?
    are you using aNY market apps to replace the default phone?
    have you restored data using a back up app in reference to phone and contacts?
    did you flash twice and use there gapps and kernel provided?

    MIUI/ICS for the Photon
    http://xdaforums.com/showthread.php?t=1536161
    Click to expand...
    Click to collapse

    Did a framework edit...see if MMS works now. :)

    http://d-h.st/YKG
    View
    3
    spleef
    spleef
    bytethegroove said:
    More options than miui? Really?
    I might have to try this (ofcoarse I'll buufify it first :) )
    Peace
    Byte
    Click to expand...
    Click to collapse

    basically from what I can tell it is cm9, aokp, and some miui rolled into one I had to restore since I needed fully functioning phone for work but was for sure worth a flash even with what is broke

    MIUI/ICS for the Photon
    http://xdaforums.com/showthread.php?t=1536161
    View

New posts