[Q] Took a break after rooting new Note3 months ago. Now ready to install Beans...

Search This thread
By:
Advanced…
C

cooch

Member
Feb 10, 2008
27
0
I rooted my Note3 when an exploit first became available using RootDeLaVega. I haven't touched it since as I was waiting for the custom ROMs to roll out. I'm ready for Beans, but I want to be sure I'm going from rooted stock(no OTA's taken)...to upgraded Baseband(currently on M19)...to safestrap...to Beans.


Correct me if I'm wrong, but from what I've read I must do the following:

1. Use method 2 here: http://xdaforums.com/showthread.php?t=2528707
2. Use Kingo to get root again.
3. Install safestrap: http://xdaforums.com/showthread.php?t=2528707
Use Beta or Stable here?
4. Download and flash Beans to an open slot after making a backup.

I miss anything? Thanks.
 
M

moin786

Senior Member
Sep 29, 2009
188
28
Hyderabad
cooch said:
I rooted my Note3 when an exploit first became available using RootDeLaVega. I haven't touched it since as I was waiting for the custom ROMs to roll out. I'm ready for Beans, but I want to be sure I'm going from rooted stock(no OTA's taken)...to upgraded Baseband(currently on M19)...to safestrap...to Beans.


Correct me if I'm wrong, but from what I've read I must do the following:

1. Use method 2 here: http://xdaforums.com/showthread.php?t=2528707
2. Use Kingo to get root again.
3. Install safestrap: http://xdaforums.com/showthread.php?t=2528707
Use Beta or Stable here?
4. Download and flash Beans to an open slot after making a backup.

I miss anything? Thanks.
Click to expand...
Click to collapse

1. Use method 2 only,download ODIN 3.09 and MJE Firmware Full Stock ROM 1.3 GB, Boot into Stock Recovery using Vol Up+Home+Power Button, Wipe Factory Reset/Data & Wipe Cache Partition, Reboot the device, as soon as screen goes black press Vol Down+Home Button to enter Download mode and connect the device to PC...then flash the MJE firmware...
2. After flashing boot again into Stock Recovery using Vol Up+Home+Power Button, Wipe Factory Reset/Data & Wipe Cache Partition
3. Use Kingo to root the device and make sure that Screen Display time is set to 10 Minutes..because u have to accept some confirmation while Kingo is rooting the device.
4. Install Safestrap 3.65 no problems till now...
5. Go into safestrap and go into Wipe then do Factory Data reset then advance wipe ( System, data, Internal Storage, cache , dalvik cache) then flash Beans ROM
6. Done.
 
Last edited:
Az Biker

Az Biker

Sr. Mod / RC-RT Committees / Shred'r of MTBs
Staff member
Jun 2, 2012
8,008
18,259
CDP Ultra - USMC - 'Murica - Wild West
GT-i9250
Verizon Samsung Galaxy Note II
cooch said:
I rooted my Note3 when an exploit first became available using RootDeLaVega. I haven't touched it since as I was waiting for the custom ROMs to roll out. I'm ready for Beans, but I want to be sure I'm going from rooted stock(no OTA's taken)...to upgraded Baseband(currently on M19)...to safestrap...to Beans.


Correct me if I'm wrong, but from what I've read I must do the following:

1. Use method 2 here: http://xdaforums.com/showthread.php?t=2528707
2. Use Kingo to get root again.
3. Install safestrap: http://xdaforums.com/showthread.php?t=2528707
Use Beta or Stable here?
4. Download and flash Beans to an open slot after making a backup.

I miss anything? Thanks.
Click to expand...
Click to collapse

I have a full on step by step, very detailed instruction for all the processes you need to take on your N3, check the link in my sig.

---------- Post added at 12:24 PM ---------- Previous post was at 12:19 PM ----------
dclutter1 said:
Did you have any problems? I'm in the exact same situation.

I'm also curious about why we have to flash the odin image first. Is that for new radios? I'm already rooted, why not install SS and go from there?
Click to expand...
Click to collapse

You only need to flash in Odin if you are on previous software (MI9, MJ7) in stead of current MJE. Flashing MJE in Odin installs latest modem, kernel and OS software updates. YOu'sd have issues running a MJE based Rom on a device with MJ7 or MI9 firmware...

If you're on MJE and rooted, start with the installation of Safestrap (custom recovery work around) on link in my sig. Everything is right there...
 
  • Like
Reactions: dclutter1
D

dclutter1

Senior Member
Dec 26, 2007
230
34
Yeah I read your thread, it looks great. Thanks for putting that together. And, thanks for the clarification.

Sent from my SM-N900V using Tapatalk
 
You must log in or register to reply here.

Similar threads

C
[Q] Root Attempt after OTA - ODIN Failed (FAIL! Auth)- Secure Check Fail Cache
Replies
36
Views
100K
H
harshan.info
hsbadr
  • Poll
[Q&A] JasmineROM Discussions [Chat Room]
Replies
2K
Views
123K
D
darkensx
sbreen94
[Q&A] Hyperdrive Rom Note 3 Verizon ║ Non-Development Discussion ║ Support
Replies
408
Views
61K
M
MarkNewvine
E
Softbricked after OTA update
Replies
28
Views
51K
donc113
donc113
G
[Q] Bottom half of screen not responding to touch
Replies
22
Views
43K
F
foobar359

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 1
    Az Biker
    Az Biker
    cooch said:
    I rooted my Note3 when an exploit first became available using RootDeLaVega. I haven't touched it since as I was waiting for the custom ROMs to roll out. I'm ready for Beans, but I want to be sure I'm going from rooted stock(no OTA's taken)...to upgraded Baseband(currently on M19)...to safestrap...to Beans.


    Correct me if I'm wrong, but from what I've read I must do the following:

    1. Use method 2 here: http://xdaforums.com/showthread.php?t=2528707
    2. Use Kingo to get root again.
    3. Install safestrap: http://xdaforums.com/showthread.php?t=2528707
    Use Beta or Stable here?
    4. Download and flash Beans to an open slot after making a backup.

    I miss anything? Thanks.
    Click to expand...
    Click to collapse

    I have a full on step by step, very detailed instruction for all the processes you need to take on your N3, check the link in my sig.

    ---------- Post added at 12:24 PM ---------- Previous post was at 12:19 PM ----------
    dclutter1 said:
    Did you have any problems? I'm in the exact same situation.

    I'm also curious about why we have to flash the odin image first. Is that for new radios? I'm already rooted, why not install SS and go from there?
    Click to expand...
    Click to collapse

    You only need to flash in Odin if you are on previous software (MI9, MJ7) in stead of current MJE. Flashing MJE in Odin installs latest modem, kernel and OS software updates. YOu'sd have issues running a MJE based Rom on a device with MJ7 or MI9 firmware...

    If you're on MJE and rooted, start with the installation of Safestrap (custom recovery work around) on link in my sig. Everything is right there...
    View

New posts