Hi dorimanx, heard many good things about your rom and wanted to make the change tonight, so i wondered: is the build on mirror1 just a snapshot or is it already the version you talk about in your post ?
Hi dorimanx, heard many good things about your rom and wanted to make the change tonight, so i wondered: is the build on mirror1 just a snapshot or is it already the version you talk about in your post ?
Hi dorimanx, heard many good things about your rom and wanted to make the change tonight, so i wondered: is the build on mirror1 just a snapshot or is it already the version you talk about in your post ?
I know this isnt the right spot for this but I thought it was pretty cool and everyone on this forum seems to know what they are talking about.
http://www.youtube.com/watch?v=w7lACwqpjqo
Workshi boys please check your camera flash worked or not in last nightly 159??
FOR ME NOT WORK IN BOTH DEFAULT CAMERA AND MIUI BUT TORCH WORKS FINE!!!!!!
no, it's was beta...
i removed it, soon i will upload working version...
Battery life is very bad atm.
Mostly because of the issue I mentioned earlier. When long-pressing the power button, the power menu pops up even when the phone is locked. This causes the phone to be unlocked, lots of programs are started in my pocket and so on... So when I take my phone out of my pocket I suddenly lost 30% battery. Very annoying.
I don't remember having this in my previous ROM (Hyperdroid GBX). And I haven't had much time to figure it out yet due to work.
My data signal is also considerably worse since I flashed the latest version. I have changed the mode to GSM Auto (PRL) as advised before. I will let you know whether it has improved things...
If someone has an idea regarding my screen lock issue please let me know.
Edit: It seems Agile Lock has been messing with my Lockscreen settings. This probably caused the issue here. But still, why is it still possible to longpress the power button while the lockscreen is activated? Doesn't make any sense to me. If possible, please disable it.
strange that was working before...
maybe the new nightly update not include hebrew in keyboard...
i didn't change any thing that belong to that except FONTS.
So just try different keyboard.
i use Slide IT + RUS + HEB packs, it's paid app and need to get used to it, but i like it.
I'm having strange things with Gallery.
One minute I can make a new wallpaper the next it says 'card unmounted or not present'
Yet I can explore card with file explorer no problem.
___________________________________________
Seems it might be a corrupted card but what corrupted it?
Also why 2 musics?
maybe its has something to do with this annoying zipaling file,did you remove it already? /system/bin/zipaling
No I have not,I do now
Is there a free software to delete system files?
- GPS LIBS 2.1 NMEA with AGPS Support 5 to 20 second to GPS lock -> Link
- Added GPS Status app to test GPS,BIG Thanks to Tytung
- Camera that make picks with 100% Jpeg quality + Video on "HD" 800x480 6Mbit/s in MPEG4 format! smooth with no delays. 30MB/minute Found It HERE Thanks LeJay!
- Added MIUI Camera v17 Fixed2, for all. (Thanks to MongooseHelix)
- Latest nightly created for BRAVO phone. (Masked as HD2)
- DATA Connection is above 2.5Mbits download! and Radio Auto switch 3G or H according to signal or Idle DATA to save Power!
- TABLET TWEAKS, With big help from Lit
- Cool Skin with ICS 4.0 transition and lot's of nice icons, created by UOT kitchen
- Battery % advance by 1% not by 5% also shows % on charger connected
- Added CRONTAB ability as ADD-ON this will make ROM free of dead file cache and RAM / SWAP cache on different time, Read Page 3 for info.
- Lots of scripts that do kernel tweaking, partition remounting, CPU down-volting, cache rearrange, send marked downloads to RAM-DRIVE and more
- ROM Support Apps2SD! NO NEED To install external scripts!!! all apps will be installed to EXT partition by default, if no EXT exist then to NAND drive!
- ROM now supports DATA To EXT, this mod will move all app data to EXT and speed access to them by 3 times!
- With DATA to EXT quadrant score is 2800+ on light rom, 2600+ on heavy loaded rom.
- ROM has media / video decoder/ encoder drivers that allow loud sound from speaker and smooth video record and play back
- ROM has 2 modes, with swap and without it. (HIGH END / LIGHT) (read more below)
- Added HACKED DPI check Market , now you can download and install any app, by using any density resolution!
- Default CM7 FM Radio
- Ads block in HOSTS file, more than 23500 ads blocked
- Full root with new superuser 3.X already updated to latest SU
- Preinstalled Busybox 1.19.4 ,configured and ready
- CLK Ril_Wrapper 4 installed to fix the connection problem
- Added GTALK 1.3 with voice / video support
- Added latest Google Apps limited pack, only needed apps
- DATA / WIFI / GPS / AUTO DIM LIGHTS and blink lights Fixed LIB!
- Working WIFI Tethering app > Barnacle Wifi Tether (Found by Rudyfastcat )
- MMS blurry pics fix for T-Mobile US users by Tytung! > HERE
- Dorimanx-Kernel made by me (kernel thread)
- ZRAM support (compcache)
- Aroma Installer Menu, that will guide you on installation!
- Flash the CWM partition layout from Mirrors,
- Do a backup of SD card,format it and create a SDext and swap(256Mb)
- Flash “Dorimanx-Rom-X.X.X-Nightly-XXX-All-in-One !!
- Everything will be done by my scripts and ROM
- Boot and restore all your stuff and customize it to your personal wishes.
- Make a backup via recovery after all to have a backup if you do something bad later.
su -
sh /sdcard/sdswap200.sh
OR
sh /sdcard/dataswap250.sh
[B]
Upper = (this is changing automatically when you set all the rest)[/B] [B]
Lower Upper Screen Buttons[/B] [B]
0 14 25 255[/B] [B]
15 149 40 255[/B] [B]
150 224 50 255[/B] [B]
225 499 70 0[/B] [B]
500 999 80 0[/B] [B]
1000 2999 100 0[/B] [B]
3000 INFINITY 250 0 (this is the max level)[/B]
#!/system/bin/bash
# Created by Dorimanx
echo 1 > /sys/devices/platform/leds-microp/leds/amber/brightness
L="log -p i -t cm"
$L "Welcome to Android `getprop ro.build.version.release` / `getprop ro.modversion`";
$L " ";
$L " DORIMANX SUPER FAST AND TWEAKED TO THE MAX ROM ";
$L " ";
$L " ";
stop
#creating debug log for admin.
echo "creating debug log for admin at /data/mountall-script-debug.sh"
echo "new boot" > /data/mountall-script-debug.sh
echo "Pre BOOT Start" >> /data/mountall-script-debug.sh
date >> /data/mountall-script-debug.sh
##############################################################################################################################################
Enable-EXT-check-and-repair-and-speedUP () {
echo "Repairing ext file system and speeding access"
echo "Repairing ext file system and speeding access" >> /data/mountall-script-debug.sh
if [ -e /dev/block/mmcblk0p2 ]; then
echo "Ext file system found..."
echo "Setting journal_data_writeback on sd-ext partition to speed the access"
cat /proc/mounts > /etc/mtab
echo "Converting EXT3 to EXT4 if not done yet by user if done then ignore"
echo "Converting EXT3 to EXT4 if not done yet by user if done then ignore" >> /data/mountall-script-debug.sh
tune2fs -O extents,uninit_bg,dir_index /dev/block/mmcblk0p2
echo "Convert is DONE, you have EXT4 NOW"
echo "Convert is DONE, you have EXT4 NOW" >> /data/mountall-script-debug.sh
tune2fs -o journal_data_writeback /dev/block/mmcblk0p2
tune2fs -m2 /dev/block/mmcblk0p2
echo "e2fsck running"
e2fsck -vyf /dev/block/mmcblk0p2
tune2fs -l /dev/block/mmcblk0p2
tune2fs -r 2048 /dev/block/mmcblk0p2
estatus=$?
if [ $estatus -gt 0 ]
then
echo "One or more errors were found in your ext4 partition"
echo "One or more errors were found in your ext4 partition" >> /data/mountall-script-debug.sh
if [ $estatus -eq 1 ]
then
echo "File system errors were corrected successfully"
echo "File system errors were corrected successfully" >> /data/mountall-script-debug.sh
elif [ $estatus -eq 2 ]
then
echo "Serious file system errors were found and corrected successfully"
echo "Serious file system errors were found and corrected successfully" >> /data/mountall-script-debug.sh
elif [ $estatus -eq 4 ]
then
echo "Serious file system errors were found and COULD NOT BE FULLY CORRECTED"
echo "Serious file system errors were found and COULD NOT BE FULLY CORRECTED" >> /data/mountall-script-debug.sh
else
echo "e2fsck has encountered technical errors and cannot continue. Script will ABORT"
echo "e2fsck has encountered technical errors and cannot continue. Script will ABORT" >> /data/mountall-script-debug.sh
fi
#statexit=1
else
#statexit=0
echo "Your ext file system was checked and was clean..No repair was necessary."
echo "Your ext file system was checked and was clean..No repair was necessary." >> /data/mountall-script-debug.sh
fi
else
echo "No Ext file system found...Skipping"
echo "No Ext file system found...Skipping" >> /data/mountall-script-debug.sh
fi
}
############################################
#Trigger, without # =ON with #OFF default=ON
Enable-EXT-check-and-repair-and-speedUP
##############################################################################################################################################
Check-FAT-Partition-and-repair () {
echo "Repairing SDCARD FAT Partition"
echo "Repairing SDCARD FAT Partition" >> /data/mountall-script-debug.sh
if [ -e /dev/block/mmcblk0p1 ]
then
echo "Sdcard found.."
echo "Sdcard found.." >> /data/mountall-script-debug.sh
mount -t vfat /dev/block/vold/179:1 /mnt/sdcard
echo "DosFsck running..."
fsck_msdos -p -f /dev/block/mmcblk0p1
dosstatus=$?
if [ $dosstatus -gt 0 ]
then
echo "One or more errors were found in your Fat32 partition"
echo "One or more errors were found in your Fat32 partition" >> /data/mountall-script-debug.sh
if [ $dosstatus -eq 1 ]
then
echo "File system errors were corrected successfully"
echo "File system errors were corrected successfully" >> /data/mountall-script-debug.sh
elif [ $dosstatus -eq 2 ]
then
echo "Serious file system errors were found and corrected successfully"
echo "Serious file system errors were found and corrected successfully" >> /data/mountall-script-debug.sh
else
echo "dosfsck has encountered technical errors and cannot continue. Script will ABORT"
echo "dosfsck has encountered technical errors and cannot continue. Script will ABORT" >> /data/mountall-script-debug.sh
fi
else
echo "Your Fat32 file system was checked and was clean..No repair was necessary."
echo "Your Fat32 file system was checked and was clean..No repair was necessary." >> /data/mountall-script-debug.sh
fi
else
echo "Your Fat32 file system could not be read Script will abort"
echo "Your Fat32 file system could not be read Script will abort" >> /data/mountall-script-debug.sh
fi
umount -l /mnt/sdcard
}
############################################
#Trigger, without # =ON with #OFF default=ON
#Check-FAT-Partition-and-repair
##############################################################################################################################################
Find-and-Mount-SD-EXT-and-SpeedUP () {
BB="logwrapper busybox";
echo "find SD Card"
for MMC_NUM in `seq 0 9`;
do
MMC_TYPE=`cat /sys/block/mmcblk$MMC_NUM/device/type`
if [ "$MMC_TYPE" = "SD" ];
then
# 2nd partition of sdcard should be the sd-ext if exist
SD_EXT_PART=/dev/block/mmcblk${MMC_NUM}p2
break
fi
done
if [ -b "$SD_EXT_PART" ];
then
log -p i -t mountsd "Mounting EXT filesystem..";
echo "Mounting EXT filesystem.." >> /data/mountall-script-debug.sh
echo "mount and set perms"
$BB mount -o rw,nobh,barrier=0,noatime,nodiratime,data=writeback,nosuid,nodev,nobh,nouser_xattr,noauto_da_alloc,commit=60,inode_readahead_blks=1,delalloc $SD_EXT_PART /sd-ext;
######################
#backup config for tests.
#$BB mount -o rw,nobh,barrier=0,noatime,nodiratime,data=writeback,nosuid,nodev,nobh,nouser_xattr,noauto_da_alloc,commit=240,journal_async_commit,inode_readahead_blks=1,delalloc $SD_EXT_PART /sd-ext;
######################
fi
if [ "$?" = 0 ];
then
$BB chown 1000:1000 /sd-ext;
$BB chmod 777 /sd-ext;
log -p i -t mountsd "sd-ext successfully mounted";
echo "sd-ext successfully mounted" >> /data/mountall-script-debug.sh
else
log -p e -t mountsd "Unable to mount filesystem for /sd-ext";
echo "Unable to mount filesystem for /sd-ext" >> /data/mountall-script-debug.sh
fi
}
############################################
#Trigger, without # =ON with #OFF default=ON
Find-and-Mount-SD-EXT-and-SpeedUP
##############################################################################################################################################
Enable-Dalvik2SD () {
if [ ! -e /data/dalvik-on-data-now ]; then
echo "Enable Dalvik2SD"
echo "Enable Dalvik2SD" >> /data/mountall-script-debug.sh
if [ -e /dev/block/mmcblk0p2 ];
then
echo "move dalvik cache from internal memory to sdcard"
echo "move dalvik cache from internal memory to sdcard" >> /data/mountall-script-debug.sh
if [ ! -d /sd-ext/dalvik-cache ];
then
mkdir /sd-ext/dalvik-cache;
busybox chown 1000:1000 /sd-ext/dalvik-cache;
busybox chmod 777 /sd-ext/dalvik-cache;
fi
echo "move dalvik to sd-ext"
echo "move dalvik to sd-ext" >> /data/mountall-script-debug.sh
busybox rm -rf /data/dalvik-cache;
echo "Create BIND to SD-EXT"
echo "Create BIND to SD-EXT" >> /data/mountall-script-debug.sh
mkdir /data/dalvik-cache
mount -o bind /sd-ext/dalvik-cache /data/dalvik-cache
echo "clean up old whiteouts in SD-EXT"
echo "clean up old whiteouts in SD-EXT" >> /data/mountall-script-debug.sh
for i in local misc property system tombstones;
do
if [ -h /sd-ext/$i ];
then rm -rf /sd-ext/$i;
fi
busybox rm -f /sd-ext/app/*.odex
setprop cm.dc2sd.active 1;
echo "+++ dalvik2sd enabled"
echo "+++ dalvik2sd enabled" >> /data/mountall-script-debug.sh
done;
else
echo "NO EXT Partition Detected"
echo "NO EXT Partition Detected" >> /data/mountall-script-debug.sh
fi
DC2SD_ACTIVE=`getprop cm.dc2sd.active`
if [ "$DC2SD_ACTIVE" != 1 ];
then
# replace symlinks with directories so we can boot without sd
rm -rf /data/dalvik-cache;
mkdir /data/dalvik-cache;
busybox chown 1000:1000 /data/dalvik-cache;
busybox chmod 777 /data/dalvik-cache;
fi;
else
echo "YOU HAVE DALVIK MOVED TO NAND DATA"
echo "YOU HAVE DALVIK MOVED TO NAND DATA" >> /data/mountall-script-debug.sh
fi
}
############################################
#Trigger, without # =ON with #OFF default=ON
Enable-Dalvik2SD
##############################################################################################################################################
Apps2SD-Script () {
# Apps2SD using symlinks and bind mounts
# Original Apps2SD script by shade@chemlab.org (cyanogen)
# Adapted for Oxygen ROM by AdamG
# Fixed for slow detection of SD cards by _thalamus and output a bit more debugging info so we can see where problems are arising.
# execute any postinstall script then kill it
enablea2sd () {
echo "mount and set perms"
echo "enablea2sd mount and set perms" >> /data/mountall-script-debug.sh
busybox chown 1000:1000 /sd-ext;
busybox chmod 777 /sd-ext;
echo "move apps from internal memory to sdcard"
echo "move apps from internal memory to sdcard" >> /data/mountall-script-debug.sh
for i in app
do
if [ -h /data/$i ]; then
rm -rf /data/$i
fi;
if [ ! -d /sd-ext/$i ]; then
mkdir /sd-ext/$i;
chown 1000:1000 /sd-ext/$i
fi;
if [ ! -d /data/$i ]; then
mkdir /data/$i
chown 1000:1000 /data/$i
fi;
if [ -d /data/$i ]; then
cp -a /data/$i/* /sd-ext/$i/
rm -f /data/$i/*
mount --bind /sd-ext/$i /data/$i
chown 1000:1000 /sd-ext/$i
chmod 777 /sd-ext/$i -R
fi;
done;
for p in app-private;
do
if [ -h /data/$p ]; then
rm -rf /data/$p
fi;
if [ ! -d /sd-ext/$p ]; then
mkdir /sd-ext/$p;
chown 1000:1000 /sd-ext/$p
fi;
if [ ! -d /data/$p ]; then
mkdir /data/$p
chown 1000:1000 /data/$p
fi;
if [ -d /data/app-private ]; then
cp -a /data/app-private/* /sd-ext/app-private/
rm -f /data/app-private/*
mount --bind /sd-ext/app-private /data/app-private
chown 1000:1000 /sd-ext/app-private
chmod 777 /sd-ext/app-private -R
fi;
done;
busybox chown 1000:1000 /sd-ext/$i;
busybox chmod 777 /sd-ext/$i
# clean up old whiteouts
for i in local misc property system tombstones;
do
if [ -h /sd-ext/$i ]; then
rm -f /sd-ext/$i;
fi
done;
# please don't put odex files in the app directory people
# it causes dexopt to crash when switching builds
busybox rm -f /sd-ext/app/*.odex
setprop oxygen.a2sd.active 1;
echo "sd-ext-ok" > /sd-ext/ext-ok
echo "+++ Apps-to-SD successfully enabled";
echo "+++ Apps-to-SD successfully enabled" >> /data/mountall-script-debug.sh
}
disablea2sd () { # replace symlinks with directories so we can boot without sd
for i in app app-private;
do
if [ -h /data/$i ];
then
rm -rf /data/$i;
mkdir /data/$i;
busybox chown 1000:1000 /data/$i;
busybox chmod 777 /data/$i;
fi;
done;
setprop oxygen.a2sd.active 0;
}
if [ -e /dev/block/mmcblk0p1 ]; # We check for the presence of the FAT partition first to see if the SD has initialised.
then
echo "SD Card has been initialised...checking for ext partition.";
echo "SD Card has been initialised...checking for ext partition."; >> /data/mountall-script-debug.sh
if [ -e /dev/block/mmcblk0p2 ]; # If false, it isn't there so we don't have to sleep the script and delay the boot.
then
enablea2sd;
else
echo "No ext partition present, apps2sd disabled";
echo "No ext partition present, apps2sd disabled" >> /data/mountall-script-debug.sh
disablea2sd;
fi;
else
sleep 4; #Enables time for a slow SD to be detected and populate the device nodes.
if [ -e /dev/block/mmcblk0p2 ];
then
echo "enablea2sd for slow SD card";
echo "enablea2sd for slow SD card" >> /data/mountall-script-debug.sh
enablea2sd;
else
echo "No ext partition present after sleep, apps2sd disabled";
echo "No ext partition present after sleep, apps2sd disabled" >> /data/mountall-script-debug.sh
disablea2sd;
fi;
fi;
sync;
}
############################################
#Trigger, without # =ON with #OFF default=ON warning. do not add # at Apps2SD-Script, if you wish to disable apps2SD then remove # at disablea2sd below.
Apps2SD-Script
############################################
#Trigger, without # =ON with #OFF default=OFF
#disablea2sd
##############################################################################################################################################
#This is in case that ROM looks for dalvik in cache. also fix recovery.
Mount-Dalvik-Cache-to-Cache-folder-and-fix-recovery () {
echo "Mounting Dalvik also to cache for ROM in case needed" >> /data/mountall-script-debug.sh
if [ ! -d /cache/dalvik-cache ]; then
mkdir /cache/dalvik-cache
fi
chown 1000:1000 /cache/dalvik-cache
chmod 777 /cache/dalvik-cache
mount -o bind /sd-ext/dalvik-cache /cache/dalvik-cache
if [ ! -d /mnt/cache ]; then
mkdir /mnt/cache
fi
if [ ! -d /mnt/cache/recovery ]; then
mkdir /mnt/cache/recovery
fi
chmod 777 /mnt/cache/recovery
if [ -h /cache/recovery ]; then
rm -rf /cache/recovery
mkdir /cache/recovery
chown 1000:2001 /cache/recovery
chmod 777 /cache/recovery
fi
}
############################################
#Trigger, without # =ON with #OFF default=ON
Mount-Dalvik-Cache-to-Cache-folder-and-fix-recovery
##############################################################################################################################################
#This script will check if your EXT has more than 250MB free before DATA move. if no room data will remain in NAND data partition.
#If found 250mb FREE on EXT then you will see light blink. = GREEN ON/OF - RED ON/OFF - GREEN ON/OF - RED ON and OFF when data transfered.
Check-and-move-DATA-To-EXT () {
if [ -e /sd-ext/ext-ok ]; then
echo "checking if you have more than 250MB free on EXT before DATA move." >> /data/mountall-script-debug.sh
echo "checking if you have more than 250MB free on EXT before DATA move."
EXTSIZE=$(df -k /sd-ext | tail -n1 | tr -s ' ' | cut -d ' ' -f4)
if [ $EXTSIZE -gt 250000 ]; then
echo "Cool You have more than 250MB free on EXT partition moving data to EXT"
echo "Cool You have more than 250MB free on EXT partition moving data to EXT" >> /data/mountall-script-debug.sh
sync
sysctl -p
if [ ! -d /sd-ext/data ]; then
mkdir /sd-ext/data
chmod 777 /sd-ext/data
chown 1000:1000 /sd-ext/data
fi
if [ ! -d /data/data ]; then
mkdir /data/data
chmod 777 /data/data
chown 1000:1000 /data/data
fi
echo "Copy Data to EXT" >> /data/mountall-script-debug.sh
echo "Copy Data to EXT"
cd /sd-ext/data
find . ! -name . -prune -type l -exec rm {} \;
cd /data/data
find . ! -name . -prune -type l -exec rm {} \;
cp -a /data/data/* /sd-ext/data/ 2> /dev/null
echo "data moved OK" > /data/data-on-ext-now
echo "GOOD data moved OK"
echo "GOOD data moved OK" >> /data/mountall-script-debug.sh
chmod 444 /data/data-on-ext-now
else
echo "YOU DONT HAVE ROOM FOR DATA ON EXT PARTITION YOU NEED 250MB FREE"
echo "YOU DONT HAVE ROOM FOR DATA ON EXT PARTITION YOU NEED 250MB FREE" >> /data/mountall-script-debug.sh
fi
fi
}
if [ -e /data/data-on-ext-now ]; then
echo "Activating DATA BIND from EXT to DATA"
echo "Activating DATA BIND from EXT to DATA" >> /data/mountall-script-debug.sh
rm -rf /data/data/* 2> /dev/null
mount --bind /sd-ext/data /data/data
echo "You moved the DATA to EXT All OK"
echo "You moved the DATA to EXT All OK" >> /data/mountall-script-debug.sh
sync
sysctl -p
fi
############################################
#Trigger, without # =ON with #OFF default=OFF
#Check-and-move-DATA-To-EXT
##############################################################################################################################################
#Remount Debug to NONE to reduce resource drain.
if [ -e /sys/kernel/debug ]; then
umount /sys/kernel/debug
mount -t debugfs none /sys/kernel/debug
fi
##############################################################################################################################################
#This mod will move system + user APPS + DATA to NAND in case that DATA was moved to EXT!
Mod2-Update () {
if [ -e /sd-ext/ext-ok ]; then
if [ -e /data/data-on-ext-now ]; then
echo "Moving NEW user data to nand to release the SDCARD for RAM Services"
echo "Moving NEW user data to nand to release the SDCARD for RAM Services" >> /data/mountall-script-debug.sh
DATASIZE=$(df -k /data | tail -n1 | tr -s ' ' | cut -d ' ' -f4)
if [ $DATASIZE -gt 70000 ]; then
if [ ! -d /data/data-nand ]; then
mkdir /data/data-nand
chown 1000:1000 /data/data-nand
chmod 777 /data/data-nand
fi
#####################################################################
cd /sd-ext/data
find . ! -name . -prune -type l -exec rm {} \;
#Dorimanx added apps data, new and old.
cp -a com.protocol.x.USB /data/data-nand/ 2> /dev/null
cp -a com.innowebtech.g0t0 /data/data-nand/ 2> /dev/null
cp -a xxbcn.AllAppsOrganizerPlusB /data/data-nand/ 2> /dev/null
cp -a com.fede.launcher /data/data-nand/ 2> /dev/null
cp -a com.nitrodesk.droid20.nitroid /data/data-nand/ 2> /dev/null
cp -a net.xdevelop.rotator* /data/data-nand 2> /dev/null
cp -a com.rechild.advancedtaskkille* /data/data-nand 2> /dev/null
cp -a com.quoord.tapatalk* /data/data-nand 2> /dev/null
cp -a ccc71.bmw.pro /data/data-nand 2> /dev/null
cp -a ccc71.pmw.pro /data/data-nand 2> /dev/null
cp -a com.sebastian.seal /data/data-nand 2> /dev/null
cp -a org.adwfreak.launcher /data/data-nand 2> /dev/null
cp -a net.dinglisch.android.taskerm* /data/data-nand 2> /dev/null
cp -a mobi.mgeek.TunnyBrowser* /data/data-nand 2> /dev/null
cp -a net.rgruet.android.g3watchdog* /data/data-nand 2> /dev/null
cp -a com.dropbox.android* /data/data-nand 2> /dev/null
cp -a com.keramidas.titaniumbackup* /data/data-nand 2> /dev/null
cp -a de.shapeservices.implus* /data/data-nand 2> /dev/null
cp -a uk.co.blueNotify* /data/data-nand 2> /dev/null
cp -a com.handcent.nextsms* /data/data-nand 2> /dev/null
cp -a com.handcent.lang.nextsms* /data/data-nand 2> /dev/null
cp -a com.adobe.flashplayer* /data/data-nand 2> /dev/null
cp -a com.dooblou.WiFiFileExplorer* /data/data-nand 2> /dev/null
cp -a com.maxmpz.audioplayer* /data/data-nand 2> /dev/null
cp -a com.opera.browser* /data/data-nand 2> /dev/null
cp -a com.qs.enhancedemail* /data/data-nand 2> /dev/null
cp -a com.tomanyz.lockWatch* /data/data-nand 2> /dev/null
cp -a com.snapwood.smugfolio* /data/data-nand 2> /dev/null
cp -a com.whatsapp* /data/data-nand 2> /dev/null
cp -a com.infonetservice.phono* /data/data-nand 2> /dev/null
cp -a se.catharsis.android.calendar* /data/data-nand 2> /dev/null
cp -a org.uguess.android.sysinfo.* /data/data-nand 2> /dev/null
cp -a com.alienmanfc6.wheresmydroid* /data/data-nand 2> /dev/null
cp -a com.snowbee.colorize* /data/data-nand 2> /dev/null
cp -a com.netqin.mobileguard* /data/data-nand 2> /dev/null
cp -a org.zeam* /data/data-nand 2> /dev/null
cp -a com.Amazon.kindle* /data/data-nand 2> /dev/null
cp -a com.ebay.mobile* /data/data-nand 2> /dev/null
cp -a com.imdb.mobile* /data/data-nand 2> /dev/null
cp -a org.iii.romulus.meridian* /data/data-nand 2> /dev/null
cp -a com.speedsoftware.rootexplorer* /data/data-nand 2> /dev/null
cp -a hk.suiaing.android.lock.screenlock* /data/data-nand 2> /dev/null
cp -a nextapp.systempanel* /data/data-nand 2> /dev/null
cp -a com.facebook.katana* /data/data-nand 2> /dev/null
cp -a com.abcOrganizer.* /data/data-nand 2> /dev/null
cp -a com.mediawoz.goweather* /data/data-nand 2> /dev/null
cp -a org.gpo.greenpower* /data/data-nand 2> /dev/null
cp -a com.zegoggles.smssync* /data/data-nand 2> /dev/null
cp -a com.swype.android.inputmethod* /data/data-nand 2> /dev/null
cp -a com.it.braincrash.volumeace* /data/data-nand 2> /dev/null
cp -a com.alk.copilot.eumarket.* /data/data-nand 2> /dev/null
cp -a com.sirma.mobile.bible.android* /data/data-nand 2> /dev/null
cp -a com.bt.android.elixir* /data/data-nand 2> /dev/null
cp -a de.stohelit.folderplayer* /data/data-nand 2> /dev/null
cp -a com.osa.android.navdroyd* /data/data-nand 2> /dev/null
cp -a com.carl.tc* /data/data-nand 2> /dev/null
cp -a com.gau.go.* /data/data-nand 2> /dev/null
##########################################################################################################
#User apps data
#Add here you custome apps. use example, cp -a YOUR APP DATA FOLDER /data/data-nand 2> /dev/null
#After you finish adding, REBOOT. your app data will be moved to NAND and files in sd-ext will be deleted.
##########################################################################################################
echo "NEW-data-nand-migrated" >> /data/mountall-script-debug.sh
##########################################################################################################
DATAEXTDELETE=`ls /data/data-nand`;
for c in $DATAEXTDELETE
do
rm -rf /sd-ext/data/$c
done
echo "data-nand-migrated" > /data/data-nand-migrated
#Mount data to /data/data
ln -s /data/data-nand/* /sd-ext/data/
#done
echo "DATA of Migrated to NAND Apps, deleted from sd-ext."
echo "DATA of Migrated to NAND Apps, deleted from sd-ext." >> /data/mountall-script-debug.sh
echo "System DATA and limited app DATA Mounted."
echo "System DATA and limited app DATA Mounted." >> /data/mountall-script-debug.sh
cd /
else
echo "Your data partiotion dont have 70MB FREE for SYSTEM NAND MOD"
echo "Your data partiotion dont have 70MB FREE for SYSTEM NAND MOD" >> /data/mountall-script-debug.sh
fi
else
echo "You didnt moved DATA TO EXT with MOD #1, you cant use MOD #2, first move all data to EXT"
echo "You didnt moved DATA TO EXT with MOD #1, you cant use MOD #2, first move all data to EXT" >> /data/mountall-script-debug.sh
fi
fi
}
##############################################
#Trigger, without # =ON with #OFF default=ON
#This is the MOD #2 Moving NEW DATA for system to use them from NAND to speedup.
#Mod2-Update
##############################################################################################################################################
BOOT-UP-FIX () {
if [ -e /sd-ext/ext-ok ]; then
if [ -e /data/first-boot ]; then
cd /sd-ext/data
find . ! -name . -prune -type l -exec rm {} \;
cp -a /data/data-nand/* /sd-ext/data 2> /dev/null
rm -rf /data/data-nand/* 2> /dev/null
rm -f /data/first-boot 2> /dev/null
echo "dalvik-cache" > /sd-ext/dalvik-cache/cache-ok
fi
fi
}
##############################################
#Trigger, without # =ON with #OFF default=ON
BOOT-UP-FIX
##############################################################################################################################################
DALVIK-CACHE-FIX () {
if [ -e /sd-ext/ext-ok ]; then
if [ ! -e /sd-ext/dalvik-cache/cache-ok ]; then
cd /sd-ext/data
find . ! -name . -prune -type l -exec rm {} \;
cp -a /data/data-nand/* /sd-ext/data 2> /dev/null
rm -rf /data/data-nand/* 2> /dev/null
echo "dalvik-cache" > /sd-ext/dalvik-cache/cache-ok
fi
fi
}
##############################################
#Trigger, without # =ON with #OFF default=ON
DALVIK-CACHE-FIX
##############################################################################################################################################
echo "Fixing System Owners"
busybox chown 0:2000 /system/etc/init.d/*
busybox chown 0:0 /cache
busybox chown 1000:2001 /cache/recovery
busybox chown 1000:1000 /cache/dalvik-cache
busybox chown 1000:2001 /cache/recovery
busybox chown 1000:1000 /dev/smd27
busybox chown 0:0 /dev
busybox chown 0:0 /system/lib/*
busybox chown 0:0 /system/lib/hw/*
busybox chown 0:2000 /dev/cpu_dma_latency
echo "Fixing System permissions"
busybox chmod 777 /dev/smd27
busybox chmod 755 /dev
busybox chmod 777 /dev/cpu_dma_latency
busybox chmod 755 /system/etc/init.d/*
busybox chmod 644 /system/etc/gps.conf
busybox chmod 644 /system/etc/hosts
busybox chmod 644 /system/etc/sysctl.conf
busybox chmod 777 /system/lib/*
busybox chmod 777 /system/lib/hw/*
busybox chmod 755 /system/lib/egl/*
busybox chmod 644 /system/build.prop
busybox chmod 777 /cache/ -R
echo "DONE"
##############################################################################################################################################
#This will copy the SU to xbin also and remove the simlink
CopyRoot () {
#Checking and fixing ROOT
rm -rf /system/xbin/su
cp /system/bin/su /system/xbin/
chmod 6777 /system/xbin/su
chown 0:0 /system/xbin/su
#Done
}
############################################
#Trigger, without # =ON with #OFF default=ON
CopyRoot
##############################################################################################################################################
#This is ZIP Align Script. it's will fix all the apps in /system/app and in /sd-ext/app every boot, already alinged apps will not be checked again.
#Temp dir is on SDCARD to give all big apps a chance to be fixed.
ZIPALIGN () {
echo "Activating zipalign for all apps"
echo "Activating zipalign for all apps" >> /data/mountall-script-debug.sh
LOG_FILE=/data/zipalign.log
ZIPALIGNDB=/data/zipalign.dba
SYSTEM=$(mount|grep "/system "|awk '{ print $1 }')
[ -e $LOG_FILE ] && rm $LOG_FILE
[ -f $ZIPALIGNDB ] || touch $ZIPALIGNDB
MissingApps=`cat /data/zipalign.dba | grep eu.chainfire.cf3d`
if [ $MissingApps !=eu.chainfire.cf3d ]; then
echo "/data/app/eu.chainfire.cf3d-1.apk" >> /data/zipalign.dba
echo "adding Missing APPS"
else
echo "Missing Apps Already Added"
fi
echo "Starting Dorimanx Automatic ZipAlign $( date +"%m-%d-%Y %H:%M:%S" )" | tee -a $LOG_FILE
mount -t vfat /dev/block/vold/179:1 /mnt/sdcard
for DIR in /system/app /data/app ; do
cd $DIR
for APK in *.apk ; do
if [ $APK -ot $ZIPALIGNDB ] && [ $(grep "$DIR/$APK" $ZIPALIGNDB|wc -l) -gt 0 ] ; then
echo "Already checked: $DIR/$APK" | tee -a $LOG_FILE
else
zipalign -c 4 $APK
if [ $? -eq 0 ] ; then
echo "Already aligned: $DIR/$APK" | tee -a $LOG_FILE
grep "$DIR/$APK" $ZIPALIGNDB > /dev/null || echo $DIR/$APK >> $ZIPALIGNDB
else
echo "Now aligning: $DIR/$APK" | tee -a $LOG_FILE
if [ ! -d /mnt/sdcard/zipalign ]; then
mkdir /mnt/sdcard/zipalign
chmod 777 /mnt/sdcard/zipalign
fi
zipalign -f 4 $APK /mnt/sdcard/zipalign/$APK
cp -a /mnt/sdcard/zipalign/$APK $APK
rm -f /mnt/sdcard/zipalign/$APK
chmod 644 /system/app/*
chmod 644 /data/app/*
chown 1000:1000 /system/app/*
chown 1000:1000 /data/app/*
grep "$DIR/$APK" $ZIPALIGNDB > /dev/null || echo $DIR/$APK >> $ZIPALIGNDB
fi
fi
done
done
touch $ZIPALIGNDB
umount /mnt/sdcard
echo "Automatic ZipAlign finished at $( date +"%m-%d-%Y %H:%M:%S" )" | tee -a $LOG_FILE
echo "Automatic ZipAlign finished" >> /data/mountall-script-debug.sh
}
############################################
#Trigger, without # =ON with #OFF default=ON
ZIPALIGN
##############################################################################################################################################
echo "Writing debug info for dorimanx support. file name /data/mountall-script-debug.sh, post it if you have problems"
if [ -d /sd-ext/data ] && [ -e /data/data-on-ext-now ]; then
echo "DATA IS ON EXT MOD #1 ONLINE" >> /data/mountall-script-debug.sh
else
echo "DATA IS ON NAND, MOD #1 is OFFLINE" >> /data/mountall-script-debug.sh
fi
if [ -e /data/data-nand-migrated ]; then
echo "System DATA and Choosen DATA migrated to NAND, MOD #2 ONLINE" >> /data/mountall-script-debug.sh
else
echo "MOD #2 not activated"
fi
echo "Starting the Android Virtual Machine, let the HIGH POWER be with you, ROM DEV DORIMANX"
echo "Starting the Android Virtual Machine, let the HIGH POWER be with you, ROM DEV DORIMANX" >> /data/mountall-script-debug.sh
echo "Pre BOOT finish" >> /data/mountall-script-debug.sh
date >> /data/mountall-script-debug.sh
start
# execute any postinstall script then kill it
if [ -e /data/firstboot.sh ];
then
log -p i -t boot "Executing firstboot.sh..";
logwrapper /system/bin/sh /data/firstboot.sh;
rm -f /data/firstboot.sh;
fi;
echo "ALL DONE, END OF FILE"
sleep 2
echo 0 > /sys/devices/platform/leds-microp/leds/amber/brightness
sleep 2
exit 1