[MOD] MobileAP Vibrant/Captivate/i9000/Epic
- Thread starter j_r0dd
- Start date
Help
Hello guys, i never rooted my phone, but today, I saw that if i root my phone i will be able to use the disabled by Tmo, mobile AP. so i installed clockwork mod, and tried to flash the signed____JI6.zip but it says in the clockwork recovery that such file or directory doesnt exist....
Hello guys, i never rooted my phone, but today, I saw that if i root my phone i will be able to use the disabled by Tmo, mobile AP. so i installed clockwork mod, and tried to flash the signed____JI6.zip but it says in the clockwork recovery that such file or directory doesnt exist....
Last edited:
Yes this is my issue as well. Computer sees the signal and attempts to connect but cannot. Installed perfectly, but my computer says "limited access." Any suggestions? Thanks. Sorry, same issue as the post 2 up from this.
Last edited:
Signature errors
I've got a Sprint Epic 4G rooted with stock kernel 2.6.29 and DI18 build.
When trying to load the zip via either with ClockworkMod Recovery (2.5.1) or using the native recovery (after renaming zip to update.zip) I get the following:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted
At first I thought it was a problem with ClockworkMod since I got the same error when trying to do a ROM backup. However, running default recovery yields same error.
Any suggestions?
I've got a Sprint Epic 4G rooted with stock kernel 2.6.29 and DI18 build.
When trying to load the zip via either with ClockworkMod Recovery (2.5.1) or using the native recovery (after renaming zip to update.zip) I get the following:
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted
At first I thought it was a problem with ClockworkMod since I got the same error when trying to do a ROM backup. However, running default recovery yields same error.
Any suggestions?
From my experience (I have installed syndicate rom, apophis and EE), MobileAP does not work with deodexed roms. With the stock rom, MobileAP runs great. Haven't witnessed any problems thus far -> Day 3.
Awesome mod, works great with a stock Samsung Epic!
Small question though, should the provider push out firmware updates (or the much-coveted Android 2.2 push), can I update and keep this mod? Or should I reflash back to pure stock and then get an update?
...or should I just wait until the patch actually rolls around and let things sort themselves out here?
Small question though, should the provider push out firmware updates (or the much-coveted Android 2.2 push), can I update and keep this mod? Or should I reflash back to pure stock and then get an update?
...or should I just wait until the patch actually rolls around and let things sort themselves out here?
...or should I just wait until the patch actually rolls around and let things sort themselves out here?
That's kinda what i have been thinking. And really who knows when 2.2 is really going to be out for are phones?
works wonderfully. even though i dont have good 3g signal where i live, the internet speed is still acceptable when using my laptop.
New to the tread, sorry for the newbie question but where can I find the clockworkmod recovery tool??
Sorry for the dumb question, but what does it mean to "flash" it with clockwork recovery? Is it just installing the zip from sdcard while in recovery mode? Because I do that and I still don't have MobileAP in the settings on my Vibrant.
I go to settings> wireless and network, but then there's no setting that says MobileAP.
My buddy has a rooted US T-Mobile Vibrant, so which one of these are compatible with his phone. Thanks in advanced
signed-mobileap.vibrant-T959UVJFD.zip
MD5: 681b0f636b302d996ed7fdf67685f775
signed-mobileap.vibrant-T959UVJI6.v2.zip
MD5: 83a6a3cf2881ce083de9fbb61b795860
signed-mobileap.vibrant-T959UVJFD.zip
MD5: 681b0f636b302d996ed7fdf67685f775
signed-mobileap.vibrant-T959UVJI6.v2.zip
MD5: 83a6a3cf2881ce083de9fbb61b795860
My buddy has a rooted US T-Mobile Vibrant, so which one of these are compatible with his phone. Thanks in advanced
signed-mobileap.vibrant-T959UVJFD.zip
MD5: 681b0f636b302d996ed7fdf67685f775
signed-mobileap.vibrant-T959UVJI6.v2.zip
MD5: 83a6a3cf2881ce083de9fbb61b795860
it depends on the version he is running on his phone. if you goo to settings>about phone you will see the proper version to use
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
4The MobileAP is now up and running on the Vibrant, Captivate & Orange i9000. Still trying to work out what is going on with the Epic version.Just flash the folowing through recovery. You access the MobileAP in Settings>Wireless and network>Mobile AP Settings.
**Captivate users please make sure you are using a custom kernel that supports this.
**Vibrant users just need to flash and you are good.
**Epic users just flash the update.zip. it appears all previous issues have been resolved. thanks to Firon for the ammends needed!
THIS NEEDS TO BE FLASHED WITH CLOCKWORKMOD RECOVERY! THIS WILL NOT WORK WITH AN AOSP ROM. THE 1st BOOT WILL TAKE A WHILE BECAUSE OF THE DEXOPT. DON"T FREAK OUT!
Use the one for your phone from below!
signed-mobileap.vibrant-T959UVJFD.zip
MD5: 681b0f636b302d996ed7fdf67685f775
signed-mobileap.vibrant-T959UVJI6.v2.zip
MD5: 83a6a3cf2881ce083de9fbb61b795860
signed-mobileap.captivate-I897UCJF6.zip
MD5: b028c3bdfad672b5b9b35e7415e68b99
signed-FINAL-mobileap.epic-SPH-D700USDI07.zip
MD5: 459937bbc30ece2142eda9177c4b81a2
signed-mobileap.epic-SPH-D700USDI18.zip
MD5: fdc1d9eb3804304a029230255898d5f9
signed-mobileap.orange.I9000BVJF3.zip
MD5:1dc0da127048f421c257b92ce3e2437a
Thanks
rhcp0112345 - original thread
andy2na - testing for captivate
Firon - update-script fix1THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! THIS IS AWESOME!!!!!!!!!!!!!!!!!
Donate for sure.1"**Vibrant users just need to flash and you are good."
I am new to Androids and took some time to figure out what to do before I tried this on my U.S. Galaxy S Vibrant. It failed and I am not certain why, though this is not uncommon common to my long experience of Linux (manual-writing requires different skills). The following is what I determined I had to do, and did:
1. I rooted the phone using "SGH-959 Root Update.zip" and associated directions - I now have a "Superuser Permission" app but it's not clear to me what it does -- I mean, if it gave me a terminal window I would understand.
2. I installed ROM Manager and executed "Flash ClockworkMod Recovery." It now reports current Recovery as ClockworkMod 2.5.1.2
3. I downloaded "signed-mobileap.vibrant.T959UVJI6.v2.zip" to my computer (Xubuntu) and renamed (a copy of it) to "update.zip."
4. I connected the phone in USB mode and copied "update.zip" to the phone root (not the microSD card root where I'd earlier placed other files, independent of phone, via USB card reader).
5. I disconnected the phone from the computer, waited for "cards" to remount local to phone, brought up ROM Manager, and selected "Boot into Recovery."
6. Once in recovery mode I selected "reinstall packages." There it started into the installation process and returned a message (in red) "installation aborted."
Settings - About Phone - Baseband version reports: T959UVJI6
What have I done wrong?1Don't rename it just flash via cwm .
Boot into cwm and select "install zip from sdcard" then select "choose zip from sdcard" . Then select and flash the file.
Sent from my SGH-T959 using XDA App1Oh my god 14 hours off & on with this & still counting. I dont understand I installed cwm &extract it on my sdcard for my Epic 4G & download the D18 roms &mobileAP.apk etc when I turn it off & turn it back on holding the 3 buttons I dont see nothin at all that says clockwork am im missing something
