[Q] Trying to flash philz touch recovery on a bricked phone [failing]

OmarKnows · Sep 4, 2014

So my phone is bricked (N7100), trying to do a hard reset through a recovery menu (currently using twrp), but I cant boot my phone or boot into recovery, only odin/download mode, trying to flash another recovery menu (philz) but whenever i try to flash it through odin, I get "Fail".

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Is what the message says

bahtsiz_bedevi · Sep 4, 2014

OmarKnows said:
So my phone is bricked (N7100), trying to do a hard reset through a recovery menu (currently using twrp), but I cant boot my phone or boot into recovery, only odin/download mode, trying to flash another recovery menu (philz) but whenever i try to flash it through odin, I get "Fail".

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.48.4-n7100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Is what the message says

Try to reflash a stock rom, Then try again to flash the recovery you want.

OmarKnows · Sep 4, 2014

0tt0m@n said:
Try to reflash a stock rom, Then try again to flash the recovery you want.

when i reflash stock rom, can i flash an order android version? or does it have to be same version i have?

bahtsiz_bedevi · Sep 4, 2014

OmarKnows said:
when i reflash stock rom, can i flash an order android version? or does it have to be same version i have?

It has to be the same or newer if you have KNOXed bootloader

OmarKnows · Sep 4, 2014

0tt0m@n said:
It has to be the same or newer if you have KNOXed bootloader

how do i know if i have aknoxed bootloader

bahtsiz_bedevi · Sep 4, 2014

OmarKnows said:
how do i know if i have aknoxed bootloader

Press and hold Power button+Volume Down+ Home Button at the same time till you see the bootloader screen.
Then press Volume Up button.
On the screen if you see something "KNOX Warranty flag" or something like that, that means you have knoxed bootloader.
If you don't see it, it's fine, flash whatever rom you want.

OmarKnows · Sep 5, 2014

0tt0m@n said:
Press and hold Power button+Volume Down+ Home Button at the same time till you see the bootloader screen.
Then press Volume Up button.
On the screen if you see something "KNOX Warranty flag" or something like that, that means you have knoxed bootloader.
If you don't see it, it's fine, flash whatever rom you want.

top right corner says:

Odin mode
Product name: GT-N7100
Current binary: Custom
System status: Custom
Knox warranty void: 1
Ap swarev : A2

Topics

Topics

[Q] Trying to flash philz touch recovery on a bricked phone [failing]

OmarKnows

Senior Member

bahtsiz_bedevi

Senior Member

OmarKnows

Senior Member

bahtsiz_bedevi

Senior Member

OmarKnows

Senior Member

bahtsiz_bedevi

Senior Member

OmarKnows

Senior Member

Similar threads

New posts