[Q] Fail to flash RUU

AteByYourself · Jun 7, 2014

Hey guys, i was trying to s-off my m7 and stubbornly did not realise that my Hboot version is not supported. Hence I've tried many methods, changing roms relocking bootloader and flashing RUU. And when i've realised i can't flash RUU for my Hboot version, I've gave up and re-unlocked my bootloader... And now it's stuck in a bootloop... Anyways to get it to work again?
Here's some info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT34FW908598
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3958mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-59adc32b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

AnGrY DuDe · Jun 7, 2014

AteByYourself said:
Hey guys, i was trying to s-off my m7 and stubbornly did not realise that my Hboot version is not supported. Hence I've tried many methods, changing roms relocking bootloader and flashing RUU. And when i've realised i can't flash RUU for my Hboot version, I've gave up and re-unlocked my bootloader... And now it's stuck in a bootloop... Anyways to get it to work again?
Here's some info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT34FW908598
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3958mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-59adc32b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

try flash it with mike1986 Rom .and use lastest CWM recovery

Seanie280672 · Jun 7, 2014

Read this thread if you want to return to stock, read it all first before applying the steps as some of it can be skipped.

http://xdaforums.com/showthread.php?t=2765514

donkeykong1 · Jun 7, 2014

AnGrY DuDe said:
try flash it with mike1986 Rom .and use lastest CWM recovery

Mike's ROMs can only be flashed with TWRP recovery and TWRP 2.6.3.3 is recomended

digitalism · Jun 7, 2014

Did you know that you can flash the particular HBoot version that is compatible?
I've had to do this countless times. As long as you are S-Off, you can downgrade to a previous HBoot before flashing a new RUU or update. As far as I know, most of the 1.26 - 2.X used 1.44. I believe 3.X updated to 1.45 or something like that, then the newer 3.x - 4.x use 1.54 and 1.55. Someone should correct me if I am wrong about some of this, as I can not remember the particular firmware versions associated with the correct HBoot as it has been a while. But this should at least get you informed.

Topics

Topics

[Q] Fail to flash RUU

AteByYourself

New member

AnGrY DuDe

Senior Member

Seanie280672

Senior Member

donkeykong1

Senior Member

digitalism

Member

Similar threads

New posts