Will this hack survive rom flashes?
Read through the first 30 or so posts but didn't find anything...
Read through the first 30 or so posts but didn't find anything...
Found a CDMA WS (4.6MB rar file) on the web, but my antivirus scan says it has trojan.
Any ideas? How large should the tool be?
THIS WORKS WITH THE LATEST UPDATE!!!! THANK YOU dreamliner2012 FOR RUNNING IT THROUGH AND CLARIFYING!
THE ORIGINAL METHODS STILL WORK FOR ANYONE WHO WANTS TO USE RADIOCOMM AND DFS INSTEAD!
ALL CREDITS TO CELLZEALOT'S THREAD AND ARNOLD SNARB'S POST
GIVE THEM YOUR PROPER THANKS!!!
this was done with stock bootloader, rom, no root, official EVERYTHING
video tutorial HERE
heres the quick rundown -
1: get the Motorola QC Diagnostics driver to install. hard with Win7 x64, but be diligent it does work.
2: boot your XT907/XT926 into BP Tools mode (Vol Up and Down + Power, scroll down to BP Tools hit Vol Up)
3: connect to your computer *duh*
4: open CDMA WS 2.7 or higher (google)
5: connect to your COM Port and press CONNECT
6: click the SECURITY tab and enter 000000 as SPC and click SEND
7: click the MAIN tab and click READ *dunno if you need to but I did for safe measure*
8: click the MEMORY tab and select READ under NV ITEMS. dismiss the SPC prompt
9: First Item to read is 8322. Last Item to read is 8323. click SAVE and name the .txt file whatever you want, just remember where you put it
10: open the .txt file you just saved and under 8322 you will see 01 00 00 00 00 etc. change 01 to 00 and save the .txt file. DONT CHANGE 8323!!!
11: back in CDMA WS click WRITE under NV ITEMS. dismiss the SPC prompt again
12: find the .txt file you just edited and click OK
13: reboot the phone and put in your preferred Sim
14: in Settings go to More... under Wireless Networks and change your Network Mode to GSM/UMTS
15: SUCK IT VERIZON
happy days ahead for all!
don't forget that THANKS button :victory:
***DISCLAIMER***
NOT RESPONSIBLE FOR YOUR LACK OF ABILITY TO FOLLOW SIMPLE DIRECTIONS RESULTING IN A BRICKED DEVICE!
originally posted this in the Motorola Droid RAZR M Q&A section but as I had originally used an XT926 to make this tutorial I thought I had better put this here >_<
---from cellzealot on how to load Win7 x64 drivers---
TWO more Verizon Droid HDs bite the dust the dust by taking a breath of fresh air compliments of the US GSM crowd.
I was wondering if this would work with windows 8, also if I wanna just unlock my phone so I can flash custom ROMs an don't want to switch to GSM do I need to follow step 13 an 14? Sorry if this is a dumb question thanks in advance
Sent from my DROID RAZR HD using Tapatalk
I'm using this phone on AT&T and it works fine most of the time, but when I try streaming YouTube videos on data alone, it doesn't always connect. It gives me a button saying to retry which I have to hit a few times before the video starts playing. What's the deal?
Sent from my Droid RAZR M
Not sure. I'm not entirely sure that your issue is due to the unlock. Sounds like a Play Services problem. I get that all the time on my other devices.
Short fix:
Wipe cache/data on all Google Apps (Store, Services, YT, Gmail, Movies, Books, Games, TTY...whatever is Google related), wipe cache/dalvik cache in recovery/safestrap (if applicable) and retry.
THIS WORKS WITH THE LATEST UPDATE!!!! THANK YOU dreamliner2012 FOR RUNNING IT THROUGH AND CLARIFYING!
Here is a screenshot of Device Manager on my PC on WIN7 64 bit with the latest 6.2 Motorola USB drivers and my XT907 connected in BP Tools mode with all of the interfaces highlighted.
There are 3 modems, 1 network device and 1 COM port that should be present and installed.
The 6.2 driver set has signed versions for these device interfaces so no force loading should be required and they should install automatically when the phone is connected in BP Tools mode with USB debugging enabled.
Make note of the port number assigned to the COM Port as that is the port you will use for CDMA WS or DFS or any other QC based NV access tool.
The QC Interface is the Motorola QC Diag Port.
Right click and choose Update Drivers then choose Do not load drivers automatically. Allow me to choose from a list of available devices.
Scroll down to Ports: COM/LPT and then Motorola and then Motorola QC Diag Port.
It will warn about unsigned drivers, just click Install anyway and it will load the driver and show up with a COM port number assigned.
Use that COM port for CDMA WS to edit the NV.
If you continue to have problems, I suggest reflashing the firmware or just the modem and fsg.mbn in fastboot, and starting over.
su
unlock-us-gsm
ALL CREDITS TO CELLZEALOT'S THREAD AND ARNOLD SNARB'S POST
GIVE THEM YOUR PROPER THANKS!!!
this was done with stock bootloader, rom, no root, official EVERYTHING
video tutorial HERE
heres the quick rundown -
1: get the Motorola QC Diagnostics driver to install. hard with Win7 x64, but be diligent it does work.
2: boot your XT907/XT926 into BP Tools mode (Vol Up and Down + Power, scroll down to BP Tools hit Vol Up)
3: connect to your computer *duh*
4: open CDMA WS 2.7 or higher (google)
5: connect to your COM Port and press CONNECT
6: click the SECURITY tab and enter 000000 as SPC and click SEND
7: click the MAIN tab and click READ *dunno if you need to but I did for safe measure*
8: click the MEMORY tab and select READ under NV ITEMS. dismiss the SPC prompt
9: First Item to read is 8322. Last Item to read is 8323. click SAVE and name the .txt file whatever you want, just remember where you put it
10: open the .txt file you just saved and under 8322 you will see 01 00 00 00 00 etc. change 01 to 00 and save the .txt file. DONT CHANGE 8323!!!
11: back in CDMA WS click WRITE under NV ITEMS. dismiss the SPC prompt again
12: find the .txt file you just edited and click OK
13: reboot the phone and put in your preferred Sim
14: in Settings go to More... under Wireless Networks and change your Network Mode to GSM/UMTS
15: SUCK IT VERIZON
happy days ahead for all!
don't forget that THANKS button :victory:
***DISCLAIMER***
NOT RESPONSIBLE FOR YOUR LACK OF ABILITY TO FOLLOW SIMPLE DIRECTIONS RESULTING IN A BRICKED DEVICE!
originally posted this in the Motorola Droid RAZR M Q&A section but as I had originally used an XT926 to make this tutorial I thought I had better put this here >_<
I NEED CONFIRMATION FROM ANYONE WITH AN XT907 ON THE LATEST UPDATE TO CONFIRM WHETHER OR NOT THIS STILL WORKS!! PLEASE LET ME KNOW SO I CAN UPDATE THE OP ACCORDINGLY!
Nope the GPS is not working. Would I be able to pickup GPS over Wifi with it set to device only?
I will flash back into CM12.1 and unlock the GSM again and see if the phone works, if so I may try and delete them again but in CM12.1.