Yep, if you are rebooting or toggling airplane mode to get LTE, this should fix you up.
Thanks, will give this a shot when I get home...
Yep, if you are rebooting or toggling airplane mode to get LTE, this should fix you up.
If you have noticed after the ZVD update you seem to be on 3g a lot and seem to have problems staying on LTE in locations you previously had good signals, here is a fix I shared in the ZVD update thread which seems to completely resolved the issue:
1. Obtain your MSL
2. open the dialer and enter ##data#
3. Tap LTE and select edit
4. Enter your MSL
5. Select BSRTimer (defaults to 3000) and change the value to 3
6. Press back, phone should reboot
7. Profit
*does not require root
After doing this, I'm back to nearly constant LTE connectivity, where prior to the fix I was on 3g almost every time I checked.
Thanks guys needed to give an update, this fix worked out great. As I figured we were having work done. Now getting constant Spark LTE.
Yep, specific fix for a bug introduced in ZVD. if you are on a different version, then it must be some other problem. You might try posting in the Q&A forum.is this only for ZVD?
I am still on ZVC and I default to 3G A LOT... distinctly more than I did before ZVC...
I just checked and my BSRTimer is already at 3...is there anything else I could poke around at?
When I tried to edit the field, it automatically changed to a 3 in the edit field. I wonder if they just screwed up the units. 3000 would imply milliseconds, which would be a problem if the field is actually in seconds (3000 seconds = 50 minutes).
Since this thread has very little activity, I'm wondering if only a few of us had the issue? For those that had the problem that this fixed, did you sideload the update through adb, or take it OTA? I used adb and that makes me wonder if those who got it over the air didn't have the problem?