HTC One M8 Root failed - Australia

Search This thread

millhhaus

Member
Jun 20, 2014
9
0
Hi there,

I have just tried to root my HTC one, and I am now stuck in the boot loader screen and it is showing *Tampered* at the top.

Can someone please advise me, or point in the direction of what I need to do now?

Thanks.
 
I should have mentioned that I only have a Mac.....

Yes it does say unlocked underneath it...

Suggestions?

Once you have unlocked your bootloader then it will show you tampered.
Download a custom recovery (I prefer TWRP) and flash it via fastboot.
Then download @Chainfire Supersu flashable zip from his site and flash it in recovery.
You have rooted your phone.
 
  • Like
Reactions: millhhaus

millhhaus

Member
Jun 20, 2014
9
0
Ater placing my device into fastboot mode, I have tried flashing my downloaded TWRP file to my HTC One in Terminal using these instructions:

Now let's flash your downloaded TWRP file to your HTC One. Type one of the following commands into your terminal window, depending on which file you downloaded above.

For the International editions, type:

fastboot flash recovery Desktop/openrecovery-twrp-2.7.0.2-m8.img


However I get the following error:

command not found

any help would be most appreciated.
 

millhhaus

Member
Jun 20, 2014
9
0
Thanks for that information.

Now, when I am trying and to flash TWRP via fastboot I am getting this error message:

ERROR: Unable to create a plug-in (e00002c7)
< waiting for device >
ERROR: Unable to create a plug-in (e00002c7)
 
Last edited:

lazydesi

Senior Member
Jan 26, 2011
179
45
  • Like
Reactions: millhhaus

millhhaus

Member
Jun 20, 2014
9
0
So I am starting to move forward :

I have followed the instructions to install philz_touch_6.25.5-m8.img by flashing it to my HTC where I get the setup screen for philz_touch_6.25.5-m8.img. I cleared the cache and I then installed the UPDATE-SuperSU-vx.xx.zip using the install zip from sdcard and then rebooted the HTC.

Unfortunately I have come back to the bootloader screen.

For what the instructions say it should be working now, but it does not seem to be?

Now it seems that whatever I try I cant seem to get past the bootloader....

And when I power down from the bootloader, It shuts down for a few minutes and then boots back into the bootloader.

Not sure what to do now?
 
Last edited:

lazydesi

Senior Member
Jan 26, 2011
179
45
So I am starting to move forward :

I have followed the instructions to install philz_touch_6.25.5-m8.img by flashing it to my HTC where I get the setup screen for philz_touch_6.25.5-m8.img. I cleared the cache and I then installed the UPDATE-SuperSU-vx.xx.zip using the install zip from sdcard and then rebooted the HTC.

Unfortunately I have come back to the bootloader screen.

For what the instructions say it should be working now, but it does not seem to be?

Now it seems that whatever I try I cant seem to get past the bootloader....

And when I power down from the bootloader, It shuts down for a few minutes and then boots back into the bootloader.

Not sure what to do now?


is your problem similar to this?

http://xdaforums.com/showthread.php?t=2784232
 
  • Like
Reactions: millhhaus

millhhaus

Member
Jun 20, 2014
9
0
Why am I getting this "FAILED (remote: image error! (BootMagic check fail))" error message all the time?

Davids-MacBook-Air:desktop millhhaus$ fastboot flash boot cm-10.2.1-m7ul.zip
target reported max download size of 1830711296 bytes
sending 'boot' (198067 KB)...
OKAY [ 6.904s]
writing 'boot'...
FAILED (remote: image error! (BootMagic check fail))
finished. total time: 6.905s
 
Last edited:

lazydesi

Senior Member
Jan 26, 2011
179
45
Why am I getting this "FAILED (remote: image error! (BootMagic check fail))" error message all the time?

Davids-MacBook-Air:desktop millhhaus$ fastboot flash boot cm-10.2.1-m7ul.zip
target reported max download size of 1830711296 bytes
sending 'boot' (198067 KB)...
OKAY [ 6.904s]
writing 'boot'...
FAILED (remote: image error! (BootMagic check fail))
finished. total time: 6.905s


because you are using M7 files mate. you need to use M8.

M7 - Htc one - 2013 model

M8 - Htc One - 2014 model

http://download.cyanogenmod.org/?device=m8
 

Top Liked Posts