Originally Posted by crusaderlong

Hi Folks

I have rooted my device priorly and tried to update the device to Jelly Bean.
1. Flashed cache
2. Installed Speed mod kernel from the package

Speedmod Kernel:

Leaked ROM:

3. Restarted device in recovery mode
4. there was no display (went down with dimm pixels)
5. Hence restarted with (volume down_power+center button)
6. Via Odin updated the below
PITmap4_all_20110627_emmc.pit
PDA:CF-Root-SGS2_XW_ODD_KE8-v4.0-CWM4.tar


Then device went black and now im not able to do any thing.
Is there any one who have come across this situation. If recovered plz share your comments.

Why did you flash a pit file? From the name it looks like the pit file is for other SGS2 i.e I9100G as it says OMAP.

Can you boot into download mode? If not your device might have been permanently bricked and you will need to either go for JTAG or
go to service center.

Since im new to this concept. I followed a stupid forum and just followed the steps. And this is where i end up now.

Finally, as you said i have given my hadset to samsung service centre and keeping my fingers crossed.

Lets hope for the best.

Thanks for your reply- atulalvenkar

Originally Posted by atulalvenkar

Why did you flash a pit file? From the name it looks like the pit file is for other SGS2 i.e I9100G as it says OMAP.

Can you boot into download mode? If not your device might have been permanently bricked and you will need to either go for JTAG or
go to service center.

Originally Posted by crusaderlong

Since im new to this concept. I followed a stupid forum and just followed the steps. And this is where i end up now.

Finally, as you said i have given my hadset to samsung service centre and keeping my fingers crossed.

Lets hope for the best.

Thanks for your reply- atulalvenkar

You've basically flashed firmware meant for a totally different phone on your phone. Although both phones use SGS2 name they are very
different internally. The one talked about in this forum is I9100. The firmware you flashed is for I9100G.

If you have warranty it might be fixed under it. if not then they'll have to replace motherboard and charge about $150-200 depending on your
country.

Atulalvenkar

Ar you sure, Replacing the motherboard is the only solution . Bcoz i read sometimes flashing the s/w also would fix the issue. Is it true?
If replaceing the MB is the only solution then in have to stop putting effort on this.

Originally Posted by atulalvenkar

You've basically flashed firmware meant for a totally different phone on your phone. Although both phones use SGS2 name they are very
different internally. The one talked about in this forum is I9100. The firmware you flashed is for I9100G.

If you have warranty it might be fixed under it. if not then they'll have to replace motherboard and charge about $150-200 depending on your
country.

Originally Posted by crusaderlong

Atulalvenkar

Ar you sure, Replacing the motherboard is the only solution . Bcoz i read sometimes flashing the s/w also would fix the issue. Is it true?
If replaceing the MB is the only solution then in have to stop putting effort on this.

It looks like your brick has nothing to do with Superbrick. Looks like a traditional hardbrick. JTAG will probably fix you.

Please do more research and find the correct thread to discuss this, as you've necroed a completely unrelated thread (since all Siyah 3.1rc6 downloads were pulled months ago, this is the wrong thread.)

thank you for this thread man

Originally Posted by Entropy512

It looks like your brick has nothing to do with Superbrick. Looks like a traditional hardbrick. JTAG will probably fix you.

Please do more research and find the correct thread to discuss this, as you've necroed a completely unrelated thread (since all Siyah 3.1rc6 downloads were pulled months ago, this is the wrong thread.)

If this is not the correct thread .. Ten which the right one.

i use siyah too and i had never give a problem

Originally Posted by crusaderlong

If this is not the correct thread .. Ten which the right one.

Like others said, you probably messed up the bootloader and when you can`t go into download mode anymore and there is no sign of life from your device, then either try for service center, if you still have warranty or give it to someone who can repair it via JTag.

What country are you living in?
I live in Germany and I saw people in German Forums that they do JTag repair for a little cash. Just try to find someone who can do this for you.

I live in India. If Jtag is the prime way. Then i have to find a geek..

Originally Posted by Scarface1991

Like others said, you probably messed up the bootloader and when you can`t go into download mode anymore and there is no sign of life from your device, then either try for service center, if you still have warranty or give it to someone who can repair it via JTag.

What country are you living in?
I live in Germany and I saw people in German Forums that they do JTag repair for a little cash. Just try to find someone who can do this for you.