Successfully rooted O+ 8.52!!
O+ 8.52 (Philippines) Specs
Android 4.1.1 Jelly Bean
4-inch WVGA (480×800) IPS Display
MT6577 1GHz dual-core processor
PowerVR SGX 531
512MB RAM
4GB internal memory
5-megapixel autofocus rear camera with LED flash
720p HD video recording
VGA front camera
3G, HSDPA, HSUPA
Wi-Fi, Wi-Fi hotspot
Bluetooth
microUSB v2.0
GPS, A-GPS
Dual SIM, Dual-Standby
Air Shuffle
1450mAh Li-Ion battery
**NOTE**
>Before rooting the phone unmount the SD-Card/External Storage.
>Un-check the "allow mock location" under Developers Option(where USB Debugging is located)
>Proper installation of ADB drivers and required drivers. Google PDAnet application to get proper drivers without hassles ^_^
>Download >> androidxda . com/data/RootGenius . exe << latest version for English site, CH site(original) >> www . sjroot . com <<.
**STEPS**
#1
install the downloaded software and drivers on your computer (I used my old Windows XP SP2 PC)!!
*Root Genius (doesn't really required installation)
*ADB drivers or the PDAnet application
#2
run or open the Root Genius app.
*it will ask to connect your phone with "USB Debugging mode" enabled or checked via Settings > Developer Option.
#3
connect your phone and wait for app to detect your phone and then just click on the "Next" button on the bottom right corner of the app.
#4
watch your phone carefully and wait for the "green" progress bar to fill up, usually on 27% you will notice on your phone that Root Genius is working/doing the rooting it will flash at least twice.
#5
when you see the "Congratulation your phone is successfully rooted!" on your computer screen that's it!
#6
verifying root;
*disconnect your phone from PC and reboot the phone.
*look for the Kinguser app on your phone.
*use Root checker app found on the playstore.
*use any app that requires root access.
#7
That's all folks, hope I helped =))
O+ 8.52 (Philippines) Specs
Android 4.1.1 Jelly Bean
4-inch WVGA (480×800) IPS Display
MT6577 1GHz dual-core processor
PowerVR SGX 531
512MB RAM
4GB internal memory
5-megapixel autofocus rear camera with LED flash
720p HD video recording
VGA front camera
3G, HSDPA, HSUPA
Wi-Fi, Wi-Fi hotspot
Bluetooth
microUSB v2.0
GPS, A-GPS
Dual SIM, Dual-Standby
Air Shuffle
1450mAh Li-Ion battery
**NOTE**
>Before rooting the phone unmount the SD-Card/External Storage.
>Un-check the "allow mock location" under Developers Option(where USB Debugging is located)
>Proper installation of ADB drivers and required drivers. Google PDAnet application to get proper drivers without hassles ^_^
>Download >> androidxda . com/data/RootGenius . exe << latest version for English site, CH site(original) >> www . sjroot . com <<.
**STEPS**
#1
install the downloaded software and drivers on your computer (I used my old Windows XP SP2 PC)!!
*Root Genius (doesn't really required installation)
*ADB drivers or the PDAnet application
#2
run or open the Root Genius app.
*it will ask to connect your phone with "USB Debugging mode" enabled or checked via Settings > Developer Option.
#3
connect your phone and wait for app to detect your phone and then just click on the "Next" button on the bottom right corner of the app.
#4
watch your phone carefully and wait for the "green" progress bar to fill up, usually on 27% you will notice on your phone that Root Genius is working/doing the rooting it will flash at least twice.
#5
when you see the "Congratulation your phone is successfully rooted!" on your computer screen that's it!
#6
verifying root;
*disconnect your phone from PC and reboot the phone.
*look for the Kinguser app on your phone.
*use Root checker app found on the playstore.
*use any app that requires root access.
#7
That's all folks, hope I helped =))