How to Unbrick/Flash
Official Firmware on
Samsung Galaxy Ace
S5830i Using Odin
First You Need
Latest Version of ODIN [ TRY TO GOOGLE IT]
Bricked Samsung Galaxy Ace S5830I
USB Cable
YOU CAN DOWNLOAD YOUR COUNTRY FRIMWARE HEAR
http://samsung-updates.com/device/?id=GT-S5830i
Samsung Galaxy Ace S5830i is one
of the most popular and best-selling
low-end Android smartphones with
nice features. The phone was
released with Android 2.2 (Froyo)
and was later upgraded to version
2.3.6 Gingerbread. Modest specs of
the this handset make it unqualified
to be updated to Ice Cream
Sandwich or Jelly Bean but there are
qualified and skilled developers out
there who have successfully, but not
buglessly, developed custom ROMs
and mods to give you some ICS and
JB flavor.
If you have recently tried a custom
ROM and now want to go back to
original Gingerbread ROM, you can
install it manually. Sometimes the
device does not start properly
because it is caught in a bootloop
and you can only see the Samsung
logo with your device name. In such
a situation, installing the official
ROM is the best solution.
Getting Prepared
Download appropriate firmware
file from above and extract the
zip to your desktop computer.
Download Odin3 1.84 tool for
multi-file installation (extract
zip): Odin_with_pit_S5830I.zip
Download Odin3 v3.07 for
single file installation (extract
zip): Odin3-v3.07.zip
Download and install Samsung
USB Drivers on your PC:
Download
Charge your phone and backup
all essential data such as
contacts, messages, apps using
These Free Apps .
Open phone Settings>
Applications> Development
and enable USB Debugging.
Installing Stock Gingerbread
Firmware
Turn off you phone and boot it into
Download mode: hold down
the Volume Down + Volume
Up buttons, then long press
the Power key till the your phone’s
screen turns up and you see the
Download mode screen. Now follow
the steps that applies your case.
Single File Installation:
1. If you are going to do a single
file installation, launch Odin3
v3.07.exe as administrator and
connect the phone to computer
via USB cable.
2. When the device connections is
established successfully the
ID:COM port at Odin 3.07 turns
blue.
3. Click on PDA button and select
the firmware file with .tar.md5
extension.
4. Do not mess with any other
thing in Odin and click the
“Start” button.
Multi-file Installation:
1. In case you choose to install a
multi-file firmware, run Odin3
1.84.exe as administrator and
connect your phone to PC while
it is in Download mode.
2. When the device is connected,
the ID:COM will turn yellow.
3. Make sure that “Re-Partition”,
“Auto Reboot” and “F Reset
Time” options are checked on
Odin.
4. Now click on PIT button and
select the .pit
file: cooperve_0623.pit
5. Then click the PDA button and
select the file with CODE in its
name.
6. Click Phone and select the file
with MODEM in its name.
7. Click on CSC and select the file
with CSC in its name.
8. Finally hit the “Start” button on
Odin and let the installation
finish.
The installation will take just a few
minutes and when it is done your
phone will reboot automatically. The
first boot usually takes longer time
so a little patience is required. When
the phone boots, check the firmware
version from Settings> About on
your Galaxy Ace S5830i. Enjoy the
new firmware. Cheers! :beer:
Sent from my GT-S5830i using xda app-developers app
Official Firmware on
Samsung Galaxy Ace
S5830i Using Odin
First You Need
Latest Version of ODIN [ TRY TO GOOGLE IT]
Bricked Samsung Galaxy Ace S5830I
USB Cable
YOU CAN DOWNLOAD YOUR COUNTRY FRIMWARE HEAR
http://samsung-updates.com/device/?id=GT-S5830i
Samsung Galaxy Ace S5830i is one
of the most popular and best-selling
low-end Android smartphones with
nice features. The phone was
released with Android 2.2 (Froyo)
and was later upgraded to version
2.3.6 Gingerbread. Modest specs of
the this handset make it unqualified
to be updated to Ice Cream
Sandwich or Jelly Bean but there are
qualified and skilled developers out
there who have successfully, but not
buglessly, developed custom ROMs
and mods to give you some ICS and
JB flavor.
If you have recently tried a custom
ROM and now want to go back to
original Gingerbread ROM, you can
install it manually. Sometimes the
device does not start properly
because it is caught in a bootloop
and you can only see the Samsung
logo with your device name. In such
a situation, installing the official
ROM is the best solution.
Getting Prepared
Download appropriate firmware
file from above and extract the
zip to your desktop computer.
Download Odin3 1.84 tool for
multi-file installation (extract
zip): Odin_with_pit_S5830I.zip
Download Odin3 v3.07 for
single file installation (extract
zip): Odin3-v3.07.zip
Download and install Samsung
USB Drivers on your PC:
Download
Charge your phone and backup
all essential data such as
contacts, messages, apps using
These Free Apps .
Open phone Settings>
Applications> Development
and enable USB Debugging.
Installing Stock Gingerbread
Firmware
Turn off you phone and boot it into
Download mode: hold down
the Volume Down + Volume
Up buttons, then long press
the Power key till the your phone’s
screen turns up and you see the
Download mode screen. Now follow
the steps that applies your case.
Single File Installation:
1. If you are going to do a single
file installation, launch Odin3
v3.07.exe as administrator and
connect the phone to computer
via USB cable.
2. When the device connections is
established successfully the
ID:COM port at Odin 3.07 turns
blue.
3. Click on PDA button and select
the firmware file with .tar.md5
extension.
4. Do not mess with any other
thing in Odin and click the
“Start” button.
Multi-file Installation:
1. In case you choose to install a
multi-file firmware, run Odin3
1.84.exe as administrator and
connect your phone to PC while
it is in Download mode.
2. When the device is connected,
the ID:COM will turn yellow.
3. Make sure that “Re-Partition”,
“Auto Reboot” and “F Reset
Time” options are checked on
Odin.
4. Now click on PIT button and
select the .pit
file: cooperve_0623.pit
5. Then click the PDA button and
select the file with CODE in its
name.
6. Click Phone and select the file
with MODEM in its name.
7. Click on CSC and select the file
with CSC in its name.
8. Finally hit the “Start” button on
Odin and let the installation
finish.
The installation will take just a few
minutes and when it is done your
phone will reboot automatically. The
first boot usually takes longer time
so a little patience is required. When
the phone boots, check the firmware
version from Settings> About on
your Galaxy Ace S5830i. Enjoy the
new firmware. Cheers! :beer:
Sent from my GT-S5830i using xda app-developers app
Last edited: