Micromax A87 (Android 2.3.5)

Is this handset worth our money


  • Total voters
    38
  • Poll closed .
Search This thread

prasad12ka4

Senior Member
[ROM] HISENSE E910 STOCK ROM RECOVERY (Credit: milky77)

As we all know that A87 has similarities with this handset also.
I found a stock ROM/ Recovery Dump of this handset.
Its a GB based ROM , but if we can boot using this, then all further ROM releases can be tried.

The below tutorial was found on http://rheanime.us/ posted by the member milky77
All credit goes to above two.

1328105r9xdp9tougdmdno.png


Download

Password: pwned.web.id

Installation Guide:
1. Unzip the file in a folder
2. Backup data
3. Make sure battery is full
4. Boot in Fastboot Mode: Hold Vol up button + Power button
5.Connect USB to mobile and connect to PC
6.Run ADB to check if device is detected. (Install drivers if not)
7.Once detected Run the batch file "Recovery.bat"

Do the above at your own Risk.
Its just for test purpose.

Below link shows ICS ported to E910
Link
So if above GB ROM works flawless we can try that too.
 
Last edited:
Sep 28, 2012
9
3
Listen guys, you all can add boot animation by using Rom toolbbox pro.
As simple as that!!
Many boot animations are available.
 

omiking44

Member
Oct 8, 2012
30
4
Pune Maharastra
User can skip 1,2,3,5,6,7 but Not 4th Step

1. Download jdk 32bit only

2. Android sdk

3. A87 drivers

4. Extract the CWM5prostylepc.in file to c:
\Anyfoldername (All extracted file must
be in your folder name NO SUB
FOLDER)

5. Download CWM5 prostylepc.in File
Link

6. Open Command Promt Or type cmd on
RUN

7. go to c:\yourfoldername using Dos
command Line

8. Switch off the phone connect the data
cable to the mobile press fast as
possible volume Down button + Power
on button for 10 Sec. Now open device
manager, you wil find “android adb
interface” right click upgrade drivers and
lead it to a location of your
extracted drivers, do the same with other
devices you get with an exclamation icon.
(dont worry if you dont find other devices,
its fine)

9. In command prompt type “fastboot
devices” without quotes and hit enter.
10. You should see somethin
likexxxxxxxxxxxx fastboot devices

11. In the command prompt window, type
“fastboot flash recovery recovery.img”
without quotes and hit enter.

12. fastboot reboot

13. Done.

pls make video of it
 

Top Liked Posts