So, in order to make kernel work on PRO fully:
1) Kernel modules for Pro
2) Full wipe (I did wipe data\cache\dalvic\system)
3) Install MIUIv5
4) Flash Iyokan Modules
5) Reboot
6) Check if all buttons\wifi\qwerty work
7) Open system\etc\hw_config.sh with text editor of any root explorer(I used X-plore)
8) Change
toCode:echo 1 > $dev/button-backlight/max_current
to remove buttons backlight only.Code:echo 1 > $dev/button-backlight-rgb1/max_brightness echo 1 > $dev/button-backlight-rgb2/max_brightness
If you want to remove QWERTY backlight also, then you will need to add here:
It seems that for now QWERTY backlight can't be configured, only turned off. New modules work fine. Change digits to make backlight lower than normal instead of dimming.Code:echo 1 > $dev/keyboard-backlight-rgb1/max_brightness echo 1 > $dev/keyboard-backlight-rgb2/max_brightness
Normal for me, lights turning on only when keyboard is slided out.
This way everything works for me.
For guide thank to MaggotHATE
Link here: http://xdaforums.com/attachment.php?attachmentid=2316227&d=1381435297One 4PDA member (MaggotHATE) already found a solution for OTG issue:
To make OTG work with this kernel, just extract modules from cm10 official.
You will need:
cifs.ko
fuse.ko
ntfs.ko
scsi_wait_scan.ko
usb-storage.ko
Replace original modules with them.
This works for me.
I provide fixed zip
I guess you have modified the actual sources. Could you share your sources to take a look on and maybe help you? (I would also like some info regarding the kernel if possible)