you were on Android 4.0.3 and you tried to wipe / clear data?? in that case it seems to be a deadly eMMC bug affecting Galaxy Note phones. I am afraid but you have a superbrick phone. Mate you need to replace Mobo. But i am not an expert so maybe someone can possibly do a magic trick for you. Best of Luck !!!

Ok here is the solution hopefully. This guy has been able to unbrick his note successfully. Hope it helps.

http://forum.xda-developers.com/show....php?t=1667886

Originally Posted by darthvedor

Ok here is the solution hopefully. This guy has been able to unbrick his note successfully. Hope it helps.

http://forum.xda-developers.com/show....php?t=1667886

Very complicated.

Originally Posted by estebandilone

That I can't do. I bought from a third person... So I don't have any warranty...

Manufacturer's warranty should apply, as your Note is less than 2 years old.

PROBLEM SOLVED

THANKS TO Dr.KETAN because of him this problem for me has been solved
Below is the step-wise description.

WHAT HAPPENED:-
01.) I was on ROOTED GT-N7000 ICS 4.0.4 PDA-DDLRB CSC(K)-ODDLR4 M-DDLR1

02.) I decided to install Alliance ROM => AllianceROM_JB_N7000XXLSZ-v3 and by mistake and just out of habit instead of using ROM Customizer, I used Mobile ODIN with WIPE (ALL of them) Selected.

03.) Although ODIN didn't came up with any errors and showed installation successful, my phone was stuck on the first screen "SAMSUNG GALAXY NOTE GT-7000" screen.

04.) After waiting for about 30-40 mins. I took out battery, took out memory card and tried to reboot again but no luck.

05.) I tired to recover by re-installing/rolling back to ROM I was on i.e. GT-N7000 ICS 4.0.4 PDA-DDLRB CSC(K)-ODDLR4 M-DDLR1, but ODIN Shows an error saying "PARAMETER INCORRECT" (screen shot attached)

06.) I then tried to install
GT-N7000 ICS 4.0.4 PDA-DDLR9 CSC(K)-ODDLR3 M-DDLR1 but ODIN failed (Screen Shot Attached)
GT-N7000 GB 2.3.6 PDA-DDLB2 CSC(K)-DDLA1 M-

07.) Now my phone is stuck in two modes only i.e.
7.1.) "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
7.2.) Download MODE

Dr. KETAN"S HELP (WHAT NEEDS TO BE DONE)
01.) Remove .MD5 from extension of ROM and keeping .TAR as extension help me got rid of the "THE PARAMETER IS INCORRECT" error.

02.) Go to Task Manager and close/disable/end process following service
02.1) KIES
02.2)FIREWALL
02.3)ANTI-VIRUS

03.) In ODIN (on PC) Select PDA do not select PHONE (this was my mistake too)

04.) In case you had/have HEIMDALL on your system , go to Device Manager (from Control Panel) and un-install the Generic Device driver

05.) Now try to install the stock ROM you have (it should get installed , at-least this happened in my case.)

WHAT IS TOTALLY USELESS ?
01.) KIES
02.) You PANICKING and FREAKING OUT

WHAT I CAN'T DO:-
01.)Visiting Samsung shop/service station

Please find the attached link to the screen shot. https://plus.google.com/photos/11509...978?banner=pwa

THANKS TO Dr. KETAN again for his HIGHLY appreiciated, respected and well needed help and guidance.