I've reverted some of the 4.2.2 changes thanks to synergy. Try the NewTest2 build and see if there is still a lot of reboot.
CM 10.2 for Canadian Optimus G (E973/E971)
- Thread starter chadouming
- Start date
-
- Tags
- development
I've reverted some of the 4.2.2 changes thanks to synergy. Try the NewTest2 build and see if there is still a lot of reboot.
With Wifi off no reboots so far, WIFI can be on but must be connected to an access point, thats with test5.
I should have time to test NewTest2 soon.
Re: CM 10.1 for Canadian Optimus G
Newest test2
Sent from my Optimus G using Tapatalk 2
---------- Post added at 07:07 PM ---------- Previous post was at 07:02 PM ----------
Sorry newest build Feb 19 test 2
Sent from my Optimus G using Tapatalk 2
Newest test2
Sent from my Optimus G using Tapatalk 2
---------- Post added at 07:07 PM ---------- Previous post was at 07:02 PM ----------
Sorry newest build Feb 19 test 2
Sent from my Optimus G using Tapatalk 2
Re: CM 10.1 for Canadian Optimus G
Experiencing same behaviour. Test Feb 19
Sent from my Optimus G using xda premium
Experiencing same behaviour. Test Feb 19
Sent from my Optimus G using xda premium
Re: CM 10.1 for Canadian Optimus G
Running 19febT2, not connected to WiFi, its been up for about 15 min no reboot yet.
Sent from my Optimus G using Tapatalk 2
---------- Post added at 08:36 PM ---------- Previous post was at 08:11 PM ----------
I noticed using CPU spy that the device was not going into deep sleep, so i rebooted. Now it goes into deep sleep, but the random reboots are back.
WIFI on but not connected + Deep Sleep = reboot
Here is a Logcat Extreme recorded https://www.box.com/s/gx0ezn6ulb7yga245ed8
Running 19febT2, not connected to WiFi, its been up for about 15 min no reboot yet.
Sent from my Optimus G using Tapatalk 2
---------- Post added at 08:36 PM ---------- Previous post was at 08:11 PM ----------
I noticed using CPU spy that the device was not going into deep sleep, so i rebooted. Now it goes into deep sleep, but the random reboots are back.
WIFI on but not connected + Deep Sleep = reboot
Here is a Logcat Extreme recorded https://www.box.com/s/gx0ezn6ulb7yga245ed8
Re: CM 10.1 for Canadian Optimus G
Installed Test 2 Feb 20. Seems OK, no reboot, tried on both WiFi on and off
sent from my LG Optimus G E971 CM10.1 & Asus Nexus 7
---------- Post added at 08:23 AM ---------- Previous post was at 07:58 AM ----------
nvm it reboot...
Also colour is a bit washed out
sent from my LG Optimus G E971 CM10.1 & Asus Nexus 7
Installed Test 2 Feb 20. Seems OK, no reboot, tried on both WiFi on and off
sent from my LG Optimus G E971 CM10.1 & Asus Nexus 7
---------- Post added at 08:23 AM ---------- Previous post was at 07:58 AM ----------
nvm it reboot...
Also colour is a bit washed out
sent from my LG Optimus G E971 CM10.1 & Asus Nexus 7
Last edited:
Not sure how much of a help this will be but I'm running 0216 Test 3 and everything works just fine. I had one black screen the first day I flashed when the LED turned on, but after disabling it in all apps the phone's been rock solid. I even woke up this morning to a blinking green LED (I got an email and I guess GMail decided it really wanted me to know about it). I pretty much always have either the wifi or the mobile data enabled.
Re: CM 10.1 for Canadian Optimus G
Changed nothing colorwise.
Nope, doesn't help.
Sent from my Galaxy Nexus using xda premium
Changed nothing colorwise.
Nope, doesn't help.
Sent from my Galaxy Nexus using xda premium
I flashed the Feb 20 Test 2 this morning. It was going fine, only one reboot.
After 5-6hrs using with Wi-Fi. I left my place so I have turned Wi-Fi off. Then it just start rebooting, it stucked at the CM loading screen for 10 mins. So I long press power button wants to force stop it and reboot again. However, I press the power button want to boot it, the phone shows the "LG" logo for less than a second and the screen went black, I can see the screen is on, but nothing shows. I have try to press power button + volume up to go to bootloader and go CWM, but it doesnt works. Still showing the LG logo for 1 sec and screen goes black.
I guess I have to flash the kdz then
After 5-6hrs using with Wi-Fi. I left my place so I have turned Wi-Fi off. Then it just start rebooting, it stucked at the CM loading screen for 10 mins. So I long press power button wants to force stop it and reboot again. However, I press the power button want to boot it, the phone shows the "LG" logo for less than a second and the screen went black, I can see the screen is on, but nothing shows. I have try to press power button + volume up to go to bootloader and go CWM, but it doesnt works. Still showing the LG logo for 1 sec and screen goes black.
I guess I have to flash the kdz then
Similar threads
- Sticky
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
48Hi, This is a continuation of the CM 10.1 nightlies thread. Things has been moving on and we are now at CM 10.2. I have been working with xboxfanj, houstonn and bbelos to bring you this. Again, this is based on mako with adapted change for optimus G. This time we are even more in sync with CAF (Code Aurora Forum).
What is working
Everything.
What is not working
You tell me.
Here are the repo needed for our devices :
https://github.com/TeamPlaceHolder
Of course, you have to be rooted, to have bootloader unlocked and a working recovery to flash this custom rom.
DO NOT FLASH NEXUS 4 KENEL MADE BY 3rd PARTY. THIS WILL MOSTLY PERMA BRICK YOUR DEVICE.
This is simply because people tend to use partition number and not by-name and our partition is different than nexus 4 ones. i.e. The rpm partition on our phone is the boot partition on nexus 4. So flashing a custom kernel will flash a boot.img in your rpm partition and then you are bricked. You have been warned.
Like usually, i can't be hold responsible if you damage your phone during any of the process described in this thread.
Thanks :
Thracky and houstonn who also works with me on this.
xplodwild
codeworkx
IOMonster
sk8erwitskil
faux123
dvhexer
Cyanogenmod Team
and a special thanks to shelnutt2 who shown me how to fix 3G
and juggie who found out the good file to change to get wifi working20Download
All the downloads will go here :
ribs.bbqdroid.org
Use geeb package
Gapps package :
http://goo.im/gapps
Modem :
There is a newer modem now available (From JB update. Houstonn and I extracted each of them and made flashable so you don't need to do the painful process of kdz only to get a new baseband)
MAKE SURE TO NOT FLASH KOREAN MODEM.
http://downloads.codefi.re/houstonn/lgog/modem12How to intall that rom ?
This require you to have TWRP or CWM already installed on your device. I recommand the former. On our device, this mainly mean you have rooted your phone and unlocked the bootloader.
Apparently, it seems these instruction where not clear enough. So I'll try to make them dumbproof. If you are not following these instruction and it doesnt work, dont expect support. It's like buying a cake mix where you only need to add milk and call the company saying their product is bull****, you added water and only got a brick. To add to this metaphor, Asking if it's because you used CWM instead of twrp or reverse is like saying : Did it didnt work because i used a fork instead of a whip to mix it ?
To flash this rom, you have to be on older Bootloader. You can alternatively flash the bootloader i linked in this thread. Read the post carefully before you flash.
- Download file in the download section.
- Put the rom AND the gapps on your internal SDCard.
- Reboot into recovery.
- Flash CM rom.
- Flash Gapps package.
- DO A FACTORY RESET (EMPHASIS HERE)
- reboot into system
11There is a new build up. It has fixed bluetooth and has latest cm changes.
Sent from my Optimus G using xda premium8
You sir, deserve a punch in the face. Come on. We are not at optimizing things. I'm still trying to figure out what is working or not. This is really stupid.
Note to all other user : I WILL NOT ACCEPT FEATURE BEFORE EVERY PROBLEMS HAVE BEEN SOLVED.
on a related note to your question, if you would have read carefully, you would have seen that i already use faux123 kernel . . .
Anyway, this is not going to be the case soon.
