How To Root My T Mobile Galaxy Not2 Secure Mode Please Help me
Help Me I Want Root My T mobile Galaxy Note 2
Help Me I Want Root My T mobile Galaxy Note 2
Look at thread no one had issue.Just follow OP instruction
while we wait for the custom ROMs to cook, is there any way to disable the annoying boot up animation from T-Mobile? Thanks
Havent bought mine yet but usually you can just delete the boot animation and it will default to the normal android boot animation.
PC not see your note at all Or only Odin not see your note ?So i installed the new samsung mobile phone drivers
I have the new odin, the tar, the superuser install
its just not connecting to oden
windows xp sp2 (if i upgrage to sp3 - blue screen of death, i have tried three times)
is there any other way, or just use another computer
Do you recall what folder to look for it?
Sent from my SGH-T889 using Tapatalk 2
It will see my note ii when it is on, both the pc and odin
it will not see my note ii when it is in download mode, both pc and odin
thanks for the attention to my problem
Be honest this1ST time i seen but anyway you can do this to see if it work. Try to uninstall Sammy driver from PC then download new Sammy driver reinstall again to see if work.Link to new samsung driver http://xdaforums.com/showthread.php?t=961956It will see my note ii when it is on, both the pc and odin
it will not see my note ii when it is in download mode, both pc and odin
thanks for the attention to my problem
Sounds like a driver problem, or lack thereof.
Reinstall the drivers?
1.4.6.0 is the samsung cell phone drivers i am using, re installing now
Yeah, but I keep getting a different MD5 for the .tar file.
I get:
67208cd19e8247af8591a83ca0a39b2
but you posted:
67208cd19e8247af8591a83ca0a39bso
---------- Post added at 11:25 PM ---------- Previous post was at 11:23 PM ----------
Didn't have this problem at all. But I'm running an 889
Your guy were correct. ThanksMe too, OP please confirm
CRC32: ecbd8141
MD5: 67208cd19e82478af8591a83ca0a39b2
SHA-1: 7fce689e89d9ad002d9597500b8e76d7e9d2231d
SHA-256: 2f6c41e4e12651d22fb6ed0affd96524d9898ded0160880a5b9ff92ebc8d96ff
SHA-512: 0d415b1d35dfb5dd6138e8d519c6da3996e0543d1cea153083a3d7290ea838abbb6dd7b2e19a8d19f543fefa0a438e6d77cef22f2d6d337e36a8adc50a2e8085
Counter reset using Triangle Away not working. After root & recovery it showed 2. After T-A it shows 1.
OK, like I said, it is not working (properly). The OP in this thread says it works.From Chainfire's thread:
Using this root increases your flash counter. You should run Triangle Away (see below) after rooting to reset the counter. Note that if you want to run custom kernels or custom recoveries, your flash counter will be set to 1 at every boot. Either configure Triangle Away to reset the counter at every boot (Play version only) or only reset the counter when you need to go into warranty.
Don't you think 1 is better than 10 ?OK, like I said, it is not working (properly). The OP in this thread says it works.
I had very easy method to flash which i did try by myself and work perfect with T889:
1. download cwm6-recovery-n7100-121014.tar : http://www.mediafire.com/?mouxvj4og7azcow
2.download CWM SUPERSU installable ZIP:http://www.mediafire.com/?w3i20sr6r58r8ah ( copy this file into your EXcard )
3.Download PC Odin : http://d-h.st/6Er
4.1.Open Odin and select PDA tab
2.Point to extracted file cwm6-recovery-n7100-121014.tar
3.Now switch off device and reboot in download modeby:
press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
4.Connect device to PC and wait till device successfully added to com port (it will turn light blue)
5.Hit ‘Start’ to flash
6.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC
7.Now reboot into CWM by :Switch off device and press Vol Up + Home +Power hold about 5 second
8.Install SuperSu.
9.Reboot.Done
Take about 5 min to do.Special thank to Dr.Ketan , Chainfire , Chenlu..
Odin V3.04 http://www.mediafire.com/?3a7gllyx3pc4ha5Is it that one? It just stays yellow. Even on stock usb cable.
Sent From Land Of Ooo.
Can also confirm it works and please thank the OP for posting "How to" ... This however does not belong in Development, How to belong in General.. Thanks Mod for not slacking..