[Q] Samsung S4 - Restart and heat problem, please help...

Search This thread
By:
Advanced…
S

Syed Majeeth

New member
Mar 3, 2014
3
0
Hi

(I posted the same question in wrong forum - Galaxy Samsung S4 Active, I don't know how to remove it)

I bought Samsung S4 mobile in Dubai Aug 2013 and I am using it in India now.

Here are the specifications.


Model: GT-I9505
Model name: Galaxy S 4 LTE
Country: France (Assuming based on my default language)
Version: Android 4.3 (Upgraded on December through samsung kies)
PDA: I9505XXUEMKF
CSC: I9505OXXEMK3
MODEM: I9505XXUEMKF


I has been using the mobile from September 2013. Initially, it was working fine, but after a month, the phone had been restarting frequently and starts with its default language (which is French). Also the phone heats up nearby the SD card slot. I searched the forum and came to know that the problem might be with battery or SD card. So, I removed my SD card and used my phone and it has been working fine without SD card and there was no issues till last week. The same problem comes up last week.

I tried Factory Data reset and wiped cache too. But, the restart and heat problem occurs frequently.

I didn't root my phone.

Kindly suggest me a solution for me.. Please help me...
 
aayushkhajuria2842

aayushkhajuria2842

Senior Member
Mar 1, 2012
305
60
Udhampur
I can provide u links but I think u hav nt done it before ...so I must tell u thai if u do something wrong you might end up making mes of ur phn ........its easy fr a person who will read the procedure carefully

---------- Post added at 07:47 AM ---------- Previous post was at 07:37 AM ----------

U should tell which firmware do you want tu flash means
..version nd region

---------- Post added at 07:50 AM ---------- Previous post was at 07:47 AM ----------

Step 1: Download the firmware package and
Odin v3.09 , and extract the zip files.
Step 2: Run Odin3 v3.09 as an Administrator.
Step 4: Switch off the Galaxy S4 and put it in
Download Mode. To do this, press Volume
Down + Home + Power buttons.
Step 5: Connect the Galaxy S4 to the computer
via the USB cable while the phone is in the
Download mode. Wait until a blue sign
appears in Odin.
Step 6: Click on the AP button in Odin and
select the .tar.md5 file that was extracted in
Step 1.
Step 7: In Odin, select the Auto Reboot and F.
Reset Time options, but make sure that the re-
partition checkbox is not checked.
Step 8: Now, click on the Start button in Odin
to begin the installation process.
Step 9: Once the installation is complete, the
device will restart and a PASS message will
appear in the left-most box at the top of Odin.
Step 10: Once you get the Samsung logo on
the home screen, you can unplug the device
from the computer and close Odin.



U will find the odin https://ws.cubby.com/p/_e693b464612b46da833bf03f2c459b9b/Odin3_v3.09.zip/697552303

---------- Post added at 07:50 AM ---------- Previous post was at 07:50 AM ----------

Just read it once if find any doubts ask me

Pres the thanx button if I hav helped u

---------- Post added at 08:09 AM ---------- Previous post was at 07:50 AM ----------

Before performing a manual installation, u
should be aware of certain aspects:
- All data should have proper back-up.
- The handset must have at least 80 percent
battery power.
- The USB drivers for the device must be
installed on the computer and USB Debugging
must be enabled.
 
Last edited:
  • Like
Reactions: adityasharma6342
You must log in or register to reply here.

Similar threads

Rhoban
  • Sticky
[HELP THREAD] Galaxy S4 | Ask any question | Noob friendly.
Replies
21K
Views
1M
No_Location
No_Location
6
[Q] Please, help!!! repair IMEI Galaxy S4 GT-I9500
Replies
125
Views
189K
O
okdark4
Hendrickson
S4 Screen cracked in front jeans pocket! Galaxy S4 is very weak!
Replies
1K
Views
400K
audit13
audit13
S
[Q] Galaxy S4 very slow wifi problem...
Replies
122
Views
156K
XeoNoX
XeoNoX
C
  • Locked
Wonted:Samsung S4 Duos I9502 Root+cooked rom
Replies
905
Views
245K
xHausx
xHausx

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 1
    aayushkhajuria2842
    aayushkhajuria2842
    I can provide u links but I think u hav nt done it before ...so I must tell u thai if u do something wrong you might end up making mes of ur phn ........its easy fr a person who will read the procedure carefully

    ---------- Post added at 07:47 AM ---------- Previous post was at 07:37 AM ----------

    U should tell which firmware do you want tu flash means
    ..version nd region

    ---------- Post added at 07:50 AM ---------- Previous post was at 07:47 AM ----------

    Step 1: Download the firmware package and
    Odin v3.09 , and extract the zip files.
    Step 2: Run Odin3 v3.09 as an Administrator.
    Step 4: Switch off the Galaxy S4 and put it in
    Download Mode. To do this, press Volume
    Down + Home + Power buttons.
    Step 5: Connect the Galaxy S4 to the computer
    via the USB cable while the phone is in the
    Download mode. Wait until a blue sign
    appears in Odin.
    Step 6: Click on the AP button in Odin and
    select the .tar.md5 file that was extracted in
    Step 1.
    Step 7: In Odin, select the Auto Reboot and F.
    Reset Time options, but make sure that the re-
    partition checkbox is not checked.
    Step 8: Now, click on the Start button in Odin
    to begin the installation process.
    Step 9: Once the installation is complete, the
    device will restart and a PASS message will
    appear in the left-most box at the top of Odin.
    Step 10: Once you get the Samsung logo on
    the home screen, you can unplug the device
    from the computer and close Odin.



    U will find the odin https://ws.cubby.com/p/_e693b464612b46da833bf03f2c459b9b/Odin3_v3.09.zip/697552303

    ---------- Post added at 07:50 AM ---------- Previous post was at 07:50 AM ----------

    Just read it once if find any doubts ask me

    Pres the thanx button if I hav helped u

    ---------- Post added at 08:09 AM ---------- Previous post was at 07:50 AM ----------

    Before performing a manual installation, u
    should be aware of certain aspects:
    - All data should have proper back-up.
    - The handset must have at least 80 percent
    battery power.
    - The USB drivers for the device must be
    installed on the computer and USB Debugging
    must be enabled.
    View

New posts