How would I revert back to my revolutionized 1.40 bootloader?
I Haz 3D!
You would probably have to take the OTA or run the RUU for it then re root with revolutionary.
How would I revert back to my revolutionized 1.40 bootloader?
I Haz 3D!
Leave the .zip and put on root of SD card reboot to bootloader and Booyah!
Sent from my PG86100 using Tapatalk
xHausx will you be making a recovery as well for the 3evo? your mods are always top noch
How would I revert back to my revolutionized 1.40 bootloader?
I Haz 3D!
Hello all. Just rooted and I seen this post and i was wondering what is the difference between thus hboot and the one that was given to us by alpha
What are some of the benefits and do you recomend it......sorry if its a noon question just asking b.c on my og EVO I never flashed a hboot and din't ran into any problem ( but i don't know if I was missing out on the benefit of having another hboot)
1.40 is attached if you want to upgrade back to it. You can also run the RUU if you need to upgrade your radios and everything else with it.
thanks for the reply, worked perfect, been solong since i've done that with my og evo.
any idea why we no longer have the ability to back out of flashing a PG86IMG file?
like on the EVO4G if you have the file in your sd root and you went into the bootloader it would ask you to update and if you selected no you could go back to the selection menu and then select recovery. On the Evo3D it seems they removed that ability b/c if you select no you only have the option to reboot the device.
I saw that too. Just the way it is. Not sure if it was you, but another poster said the same thing.
When the 3vo came out I thought it had 4gb of internal storage, but it seems there is only about a gig partitioned. With the extra fastboot commands can we repartition the emmc if there are no other partitions on it?
Sent from my PG86100 using XDA Premium App
A 3vo? I don't know about that. The Evo 3d on the other hand has too much stuff built in to it to do that though. It's very possible there is a way but unless you absolutely know what you're doing you are just asking to brick your phone.
Since the HBoot flash I haven't been able to use ddms does this have anything to do with that? DDMS says it can't connect to the phone anyone besides me have this problem?
Yup, mine is doing that too but I hadn't figured out what was causing it. It will work until the phone finishes booting and then it cuts out.
yup i realized that about an hour ago myself...Its good to hear that I'm not alone.. it was a long and lonely night...
Actually it was still working on my Xoom so I new it wasn't the PC.
Since the HBoot flash I haven't been able to use ddms does this have anything to do with that? DDMS says it can't connect to the phone anyone besides me have this problem?
Accidentally just selected mfg kernel. My phone vibrated and rebooted what happened?
Sent from my PG86100 using XDA Premium App
The ICS 2.89 Based Kernels only boot on the 1.58 based Hboots. The VM ICS Leak Kernel and other custom kernels like anthrax and Buttered Toast will boot on any hboot. Certain Hboots only work with certain Rom/Kernel combos. See the Hboot Differences Thread in my signature (and the general section) for specific details.I am stuck in boot loop.
I was originally S-OFF and today I unlocked with htc unlock code. And flashed hboot just fine. I was running Stock unrooted ICS with probably all radios updated.
I am on HBOOT 1.04.2000 and Radio 1.09.00.0706. I still have PG86IMG.zip for eng-hboot and I am unable to get to fastboot menu to remove or replace with another hboot.
UPDATE:- Removed my SDCARD and booted into fastboot and ran following command which fixed it.
Code:fastboot flash zip PG86IMG_1.58-hboot.zip
Does this ENG Hboot only works on certain radio or firmware?
I already have a post in mpgrimm2's thread on bootloaders with all the bootloaders I've tested. The Revolutionary bootloader was just added for anyone that has a sentimental attachment to that. If xHausx wants to post them in this thread as well that's fine, but I just wanted to point out that they are already available in the General Forum.
Edit: Perhaps xHausx could put a link to the post in the General Forum on the OP of this thread to make it easier for him to update?
ramjet73
Thanks Haus!
Did you already check to see if they included the extra commands??