CM9 (ICS) /CM10 (Jelly Bean) /Paranoid Android (JB) and TWRP for ZTE V11A/V71A/V55

joe.stone · Jun 5, 2012

It needs some more adjustment , in sdcard and usb handling , but now it boots up on the tablet.

xly15 · Jun 6, 2012

Joe.stone working his but off. Thanks for working so hard to get the cdma working.

Sent from my Nexus S 4G using xda premium

dadme · Jun 8, 2012

joe.stone said:
It seems the update disabled this feature in the bootloader.
You can flash cwm using adb , you need root rights .The best is when adbd is running in root mode (for eaxample kernel#60).
Download this :flash_image binary

then turn on usb debugging.
to flash cwm you need the following commands:
adb push CWMrecovery.img /data/local/tmp
(where cwmrecovery.img is the name of the cwm image file name.)
adb push flash_image /data/local/tmp
adb shell chmod 755 /data/local/tmp/flash_image
adb shell (you need # not $ for flashing , so if you got $ type su to get #)
cd /data/local/tmp
./flash_image /dev/block/mmcblk0p18 CWMrecovery.img

Dont forget to remove the install-recovery.sh file from /system/etc othervise it will install
stock recovery at system start if it has not the stock recovery.

To revert the bootloader you need to flash NON-HLOS.bin"to "/dev/block/mmcblk0p1" and "emmc_appsboot.mbn" to "/dev/block/mmcblk0p7" from a previous version .

i got error scanning partitions no such device on last adb command. Any ideea?

leedashone · Jun 8, 2012

Thanks for your great job. hope BT & Camera work soon

joe.stone · Jun 8, 2012

Touch Recovery

The new touch recovery downloadable from first post.

joe.stone · Jun 8, 2012

dadme said:
i got error scanning partitions no such device on last adb command. Any ideea?

do you have root (#) or not ($)?

dadme · Jun 9, 2012

joe.stone said:
do you have root (#) or not ($)?

Solved. Thanks anyway.

vesnaz · Jun 9, 2012

joe.stone said:
The new touch recovery downloadable from first post.

SmartTab 10 (v11A)

The file link that you requested is not valid.

joe.stone · Jun 9, 2012

vesnaz said:
SmartTab 10 (v11A)

The file link that you requested is not valid.

Reuploaded and link changed , now downloadable.

hakan palaz · Jun 10, 2012

joe.stone said:
to flash cwm you need the following commands:
adb push CWMrecovery.img /data/local/tmp
(where cwmrecovery.img is the name of the cwm image file name.)
adb push flash_image /data/local/tmp
adb shell chmod 755 /data/local/tmp/flash_image
adb shell (you need # not $ for flashing , so if you got $ type su to get #)
cd /data/local/tmp
./flash_image /dev/block/mmcblk0p18 CWMrecovery.img

Dont forget to remove the install-recovery.sh file from /system/etc othervise it will install stock recovery at system start if it has not the stock recovery.

To revert the bootloader you need to flash NON-HLOS.bin"to "/dev/block/mmcblk0p1" and "emmc_appsboot.mbn" to "/dev/block/mmcblk0p7" from a previous version .

Dear joe,

could you please control syntax?
i applied all (three times) but returns "error scanning partitions: No such file or directory" message.

joe.stone · Jun 10, 2012

hakan palaz said:
Dear joe,

could you please control syntax?
i applied all (three times) but returns "error scanning partitions: No such file or directory" message.

The syntax is correct.
Upload a sceenshot what happens , I think the command is not running as root.
It is better to install it from a booted cwm . In that case you will have root and adbd is running in root mode.
adb reboot bootloader
fastboot boot v10_cwmrecovery.img
adb wait-for-device
adb push v10_cwmrecovery.img /data/media
adb shell flash_image /dev/block/mmcblk0p18 /data/media/v10_cwmrecovery.img

Of course the new twrp can be used as well just remember to change img filename in commands.

joe.stone · Jun 10, 2012

New cm9 build

There is a new version in the first post.
Sleep of death fixed
wifi scanning and connecting fixed now it works fast and as expected. (The turn off bug is still there)
Blue message notification
Compiled from fresh cm9 source so there is some new apps and fixes.
Vodafone clock added.
Hopefully the cdma will work on v55 . (at least voice calls should according to test and dev on zte warp)

hakan palaz · Jun 10, 2012

joe.stone said:
The syntax is correct.
Upload a sceenshot what happens , I think the command is not running as root.
It is better to install it from a booted cwm . In that case you will have root and adbd is running in root mode.
adb reboot bootloader
fastboot boot v10_cwmrecovery.img
adb wait-for-device
adb push v10_cwmrecovery.img /data/media
adb shell flash_image /dev/block/mmcblk0p18 /data/media/v10_cwmrecovery.img

Of course the new twrp can be used as well just remember to change img filename in commands.

Dear joe,

successfully booting cwm recovery . but when i typed "adb wait-for-device" device wating forever. if i didnt type that row, returns error message.

attached screenshot

joe.stone · Jun 10, 2012

hakan palaz said:
Dear joe,

successfully booting cwm recovery . but when i typed "adb wait-for-device" device wating forever. if i didnt type that row, returns error message.

attached screenshot

Install the stock driver package , because adb wait-for-device is the command which wait until the device is not visible via adb. In cwm you should wait a few minutes until adb is started. Which cwm did you tried ? The original one or my modified one . My modified one should work as well as twrp recovery .

hakan palaz · Jun 10, 2012

joe.stone said:
Install the stock driver package , because adb wait-for-device is the command which wait until the device is not visible via adb. In cwm you should wait a few minutes until adb is started. Which cwm did you tried ? The original one or my modified one . My modified one should work as well as twrp recovery .

ok i'll try again after driver installation.
I tried your modified cwm.
i wanted to install it for your zipped kernel v60. but i saw that i can install kernel with booted cwm, no need to flash it.
i installed kernel and made overclock. thanks.

dadme · Jun 11, 2012

joe.stone said:
There is a new version in the first post.
Sleep of death fixed
wifi scanning and connecting fixed now it works fast and as expected. (The turn off bug is still there)
Blue message notification
Compiled from fresh cm9 source so there is some new apps and fixes.
Vodafone clock added.
Hopefully the cdma will work on v55 . (at least voice calls should according to test and dev on zte warp)

Installed last night. Works well. Waiting for news about the camera and bluetooth. No more SOD by now.

Mr. Hat · Jun 11, 2012

Hey,
great work joe.

I´ve just uploaded the fixed bootanimation.

http://www.4shared.com/zip/m4F_K69s/bootanimation.html

It didn´t work when i just replaced the one through root explorer, so try it, or you can just copy it to original ROM update from joe.stone to system/media and flash it again, it won´t remove anything, it will just change the animation, or you can wait, untill joe puts it in his ROM (if he decides to)

xly15 · Jun 11, 2012

Hey joe, I just installed your newest build and the 3g is still not working correctly. It keeps telling me that the sim card is missing. I even tried inputting the apn settings for sprint and got nothing.
By what I see in the about device page in the settings the IMEI number is not there it is a 0 along with the MDN. I am also pretty certain that the serial number is wrong. I will do a logcat later and upload that along with some screen shots.

joe.stone · Jun 11, 2012

Mr. Hat said:
Hey,
great work joe.

I´ve just uploaded the fixed bootanimation.

http://www.4shared.com/zip/m4F_K69s/bootanimation.html

It didn´t work when i just replaced the one through root explorer, so try it, or you can just copy it to original ROM update from joe.stone to system/media and flash it again, it won´t remove anything, it will just change the animation, or you can wait, untill joe puts it in his ROM (if he decides to)

Thanks, I just left the new stock cm9 bootanimation , but in the next it will be included .

joe.stone · Jun 11, 2012

xly15 said:
Hey joe, I just installed your newest build and the 3g is still not working correctly. It keeps telling me that the sim card is missing. I even tried inputting the apn settings for sprint and got nothing.
By what I see in the about device page in the settings the IMEI number is not there it is a 0 along with the MDN. I am also pretty certain that the serial number is wrong. I will do a logcat later and upload that along with some screen shots.

Uploading some logs could help , because I am shooting blindly .
Does the cdma register to the network or not ?
Only 3G not working or Voice is not working as well ?
To make log :
adb logcat -b radio > radiolog.txt

What happens when you try to start rild from adb shell . Maybe it can tell us what lib is missing why it is not started.(maybe this is the cause why no imei shown). Now all the libs which are used by the gsm model is copied from the stock v55 rom for this device.
adb shell
then
rild