[RADIO] HTC Evo Shift 4G Radios [PG06IMG.zip] (Updated: 16 June 2011)

Search This thread

gu1dry

Senior Member
Oct 15, 2009
837
666
127.0.0.1
Code:
/* I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or the end of the world. Please do some research
 * if you have any concerns about flashing a radio before flashing it!
 * YOU are choosing to make these modifications, and if you point the
 * finger at me for messing up your device, I will laugh at you. */

How to Flash:

In order for this to work, the HTC Evo Shift 4G needs to be S-OFF. Flashing the radio with a corrupt file or interrupting the flash, can brick the device, please proceed with caution.

  1. Download the your choice of radio for the HTC Evo Shift 4G.
  2. Make sure the filename is PG06IMG.zip exactly or it will not work and copy it to the same folder as adb (the /platform-tools folder within the Android SDK folder).
  3. Connect the HTC Evo Shift 4G to the computer via USB.
  4. On the computer, open terminal and run the following commands:
    Code:
    adb push PG06IMG.zip /sdcard/PG06IMG.zip
    adb shell md5sum /sdcard/PG06IMG.zip
    NOTE: The md5 should match up the provide the original download location. If not, redownload & try again.
    Code:
    adb reboot bootloader
  5. The HTC Evo Shift 4G will reboot & usually boot into fastboot. Pressing the Power button will put the device into the bootloader.
  6. The bootloader will scan for the radio update. Once it finds the update, select Yes.
  7. Allow the bootloader to finish flashing the updated radio, and reboot the HTC Evo Shift 4G normally.

Downloads:

From Froyo-based RUUs:
  • From 1.17.651.1 RUU (Stock):
    • CDMA: 1.07.00.1129
      md5: 1ca0e51ba2bf3cec91d216326796461a
    • WiMax: 27167
      md5: f0bd032a2752e05e89575650c8dbe35e

From Gingerbread-based RUUs:
  • From 2.72.651.2 RUU:
    • CDMA: 1.08.00.0506
      md5: 6f00fb2c65222ce21a224e8bbe5d67a9
    • WiMax: no WiMax radio was included in this leak
  • From 2.76.651.4 OTA/RUU:
    • CDMA: contains the same radio from the 2.72.651.2 RUU
    • WiMax: 27240
      md5: 0a41e570de8a0c16954efb62d2742055
 
Last edited:

cosine83

Senior Member
Apr 2, 2010
587
51
Las Vegas, NV
www.grathwohl.me
Freezing at splash screen after flashing in bootloader, for me. Battery pull and go back into bootloader and the radio version is changed. I'm using CM 7.0.3.1. Reflashing the ROM in recovery didn't work. Using the nandroid I did before flashing the radio update worked, though!
 

bigfoottrucker

Senior Member
Jul 15, 2010
237
22
Yakima
Flashed fine for me. Downloaded to phone. Copied to root of SD. Reboot to bootloader and have had no real probs. Thought I saw a couple graphical glitches on sense at reboot but flawless since.

Sent from my PG06100 using XDA Premium App
 

koolkid09

Senior Member
May 16, 2010
204
3
Is this safe to apply over any ROM? Lets say CM7 nightly 75?

Sent from my EVO Shift 4G powered by CM7 while experimenting with NOVACANE!
 

mcarrion78

Senior Member
Jun 19, 2010
315
24
Fayetteville NC
It should be safe. I flashed it while on the new gb sense leak and I'm now running a nandroid of cm7 I had. Confirmed much better signal n I see slight improvement in 3g service.

Sent from my PG06100 using Tapatalk
 

koolkid09

Senior Member
May 16, 2010
204
3
It should be safe. I flashed it while on the new gb sense leak and I'm now running a nandroid of cm7 I had. Confirmed much better signal n I see slight improvement in 3g service.

Sent from my PG06100 using Tapatalk

Thanks. Going to make a backup and try it.

Sent from my EVO Shift 4G powered by CM7 while experimenting with NOVACANE!
 

MrTrip

Senior Member
Feb 3, 2010
477
58
Waterloo. IA
Not flashing for me...says no image. I placed it in the root /sdcard/, this is correct right?

MD5 matches, file name is PG06IMG.zip and it is in /sdcard/PG06IMG.zip

Just says

Loading...[PG06IMG.zip]
No image!

No way to really verify if its there either while in bootloader.........
 
Last edited:

koolkid09

Senior Member
May 16, 2010
204
3
1.When I do this | C:\adb>adb push PG06IMG.zip /sdcard/PG05IMG.zip

2.I get this| 1288 KB/s (9481164 bytes in 7.187s)

3.Then I put the second part in| C:\adb>adb shell md5sum /sdcard/PG06IMG.zip

4.Then I get this| md5sum: can't open '/sdcard/PG06IMG.zip': No such file or directory

Anyone know what I'm doing wrong?
 

MrTrip

Senior Member
Feb 3, 2010
477
58
Waterloo. IA
1.When I do this | C:\adb>adb push PG06IMG.zip /sdcard/PG05IMG.zip

2.I get this| 1288 KB/s (9481164 bytes in 7.187s)

3.Then I put the second part in| C:\adb>adb shell md5sum /sdcard/PG06IMG.zip

4.Then I get this| md5sum: can't open '/sdcard/PG06IMG.zip': No such file or directory

Anyone know what I'm doing wrong?

There is a typo.

You named it PG05, it needs to be PG06.

Update the instructions in first post please.
 

koolkid09

Senior Member
May 16, 2010
204
3
Do I need to be on a sense rom for this to work?

I've tried everything and it doesn't seem to want to work.
 

MaxCarnage

Senior Member
Feb 4, 2007
1,719
775
San Antonio, TX
Ran the update and I can't get past the HTC flash screen after bootup. Restoring my nandroid backup right now; hopefully I'll be back up and running soon.

EDIT: Nandroid restore successful; I am now on the new baseband version. Seeing a pretty dramatic increase in signal strength; I checked before I did the update and was seeing -84 dBm in my bedroom. Right now after the update it's at -73 dBm. Be interesting to see how it is at work tomorrow. Thanks for posting this update!
 
Last edited:

koolkid09

Senior Member
May 16, 2010
204
3
This is what I get when I go into fastboot

sorry for the bad quality

1st it fails then it goes back to the bootloader screen.
 

Attachments

  • Snapshot_20110516_1.JPG
    Snapshot_20110516_1.JPG
    33.7 KB · Views: 605
  • Snapshot_20110516_2.JPG
    Snapshot_20110516_2.JPG
    22.3 KB · Views: 510

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    Code:
    /* I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or the end of the world. Please do some research
     * if you have any concerns about flashing a radio before flashing it!
     * YOU are choosing to make these modifications, and if you point the
     * finger at me for messing up your device, I will laugh at you. */

    How to Flash:

    In order for this to work, the HTC Evo Shift 4G needs to be S-OFF. Flashing the radio with a corrupt file or interrupting the flash, can brick the device, please proceed with caution.

    1. Download the your choice of radio for the HTC Evo Shift 4G.
    2. Make sure the filename is PG06IMG.zip exactly or it will not work and copy it to the same folder as adb (the /platform-tools folder within the Android SDK folder).
    3. Connect the HTC Evo Shift 4G to the computer via USB.
    4. On the computer, open terminal and run the following commands:
      Code:
      adb push PG06IMG.zip /sdcard/PG06IMG.zip
      adb shell md5sum /sdcard/PG06IMG.zip
      NOTE: The md5 should match up the provide the original download location. If not, redownload & try again.
      Code:
      adb reboot bootloader
    5. The HTC Evo Shift 4G will reboot & usually boot into fastboot. Pressing the Power button will put the device into the bootloader.
    6. The bootloader will scan for the radio update. Once it finds the update, select Yes.
    7. Allow the bootloader to finish flashing the updated radio, and reboot the HTC Evo Shift 4G normally.

    Downloads:

    From Froyo-based RUUs:
    • From 1.17.651.1 RUU (Stock):
      • CDMA: 1.07.00.1129
        md5: 1ca0e51ba2bf3cec91d216326796461a
      • WiMax: 27167
        md5: f0bd032a2752e05e89575650c8dbe35e

    From Gingerbread-based RUUs:
    • From 2.72.651.2 RUU:
      • CDMA: 1.08.00.0506
        md5: 6f00fb2c65222ce21a224e8bbe5d67a9
      • WiMax: no WiMax radio was included in this leak
    • From 2.76.651.4 OTA/RUU:
      • CDMA: contains the same radio from the 2.72.651.2 RUU
      • WiMax: 27240
        md5: 0a41e570de8a0c16954efb62d2742055
    2
    Neither of those radios worked for me...luckily I had the old one from downgrading process. I checked the files with 2 md5 checkers and it just didn't work. I was stuck at the HTC boot screen just thought I'd share my experience in case anyone else thinks they bricked their phone. Just load up the downgrade 2.2 rom that's sticked and reroot using the GUI. No problems

    This is a known issue when flashing these radios. There's no need to run the RUU if you are stuck at the splash screen. Going into recovery and wiping dalvik and cache should let your phone boot. If not, you can restore your nandroid and keep the radios you just flashed. Obviously You need to remove the PG06IMG.zip from your sd to access recovery

    Sent from my PG06100 using Tapatalk
    2
    You need to format ur card to fat32 for this to work, and yes it erases your card.

    Sent from my PG06100 using XDA App
    2
    hello all,
    does anyone know if you can flash EVO SHIFT radio's to the HTC MERGE?

    thanks

    cheers,
    disco


    Wouldn't do it. Great way way to BRICK a Device :rolleyes: .
    2
    If bootloader doesn't automatically recognize the file then you probably need to format you sd card to fat32.

    Sent from Gingerbread Speedy 4G

    Another problem might be that his PG06IMG.zip might actually be named PG06IMG.zip.zip

    In windows go to Tools > Folder options... > View tab > uncheck "Hide extensions for known file types"

    Then make sure the file is named correctly. That's an easy check first before going through the hassle of reformatting the SD.
    And an easy way to check the filesystem of the SD card is to mount the drive in Windows, open My Computer, right click the SD card > Properties and look at the File System.