[Q] VAPD7 stuck at splash screen

---

I have a VPAD7. It's stuck at the viewsonic Birds flashscreen. This is not a looping boot such has has been described in other threads -- it doesn't alternate between the flash screen and brief bursts of blank screen. It just sits there at the splash screen; I've left it for hours, and it just sits.

This all started when I rebooted to FTM (holding down the power button and vol down at the same time) in order to get this information:

* SWVer=3.240
* MODEL:FM6-0001
* HWVer:107

When I rebooted (power cycled) after that, it was stuck.

I have rooted the machine in the past (months and months ago), and installed CW mod. I *can* reboot the machine into recovery mode, holding both volume buttons when pressing the little pin reset button and then quickly pressing and holding the power button. I get the "ClockworkMod Recovery v2.5.1.2" screen. From there, I've tried wiping the cache, wiping the Davlik cache (although I get an error message when doing that about how it can't mount /dev/block/mmcblk0p2), flashing the update.zip on my SD Card (which is lakehousetech's Froyo 2.2 enhanced), and "wipe data/factory reset". I've also tried restoring from some of the backups I made in the past.

No matter what I do, if I try to do a straight boot, the device just hangs there at the splash screen. I can boot to FTM mode, and I can boot to recovery mode, but nothing seems to allow me to get the thing to actually boot all the way up and run.

Does anybody have any ideas of what might be wrong and how I might do something about it?

Thanks,

-Rob

You have new version of viewpad7. Maybe lakehouse rom is not compatible, please try other.

Sent from my ViewPad7 using xda premium

To OP, Froyo ROM that you've saved should be ITE (multi-touch screen) compatible with H/W ver. 107 - I don't think the custom ROM itself is the source of the problem, unless your saved CWM files are corrupted somehow ?

Do you have another mSD card, try formatting it first and copy the CWM folder/files on it, insert into Vpad7 and boot into Recovery, then do a full dalvik, cache and system/data wipe 3 times - before doing a Restore of the Froyo ROM.

Make sure your device is fully charged and let the ROM boot up & settled down, which can take as much as 10 minutes. If you have a 3G mobile Sim card, pull it out although it should NOT affect anything - just precautionary to rule out other factors.

If still NOT good, you will have to try flashing another custom ROM from scratch, I've been very happy with EU V1.7b ITE verision since last Sept/October - the original developer Amalgation hasn't been around, I think, and his link might still be broken for the download - hopefully, you have it saved before. Otherwise, post or PM me and I can provide a secured link for the untouched, original zip file as uploaded before - so that you can try to get the device back in working order.

Or, download the factory *.nb0 file and install it with the Viewsonic utility - for stock, unrooted condition as shipped. Then, you can use SuperOneClick to root, install CWM v2.x again (I personally like it better than the newer 4.x or 5.x verisons to set up A2SD) and resume playing with the limited choice of Roms out there now ...

Good luck & post your efforts/results back here to see whether other ideas might be useful. You didn't try to install/override with any overclocking kernel as none of them work with the ITE hardware, right

Here's a link to some of my earlier notes written about the Vpad7 - in case you missed them. Many of the links are down & sadly, no longer available.

http://forum.xda-developers.com/show....php?t=1264647