View bml dump contents?

---

Hey guys! Thanks to the good help of kraka23 and the forum I have succesfully rooted my phone and (think) that I have dumped my bml6 and bml7, via the "dd" shell command WillingMagic provided, correctly. I will be uploading these files soon but I would like to see what are the contents. I know this is the goal of the thread so I was wondering how you guys do to examine the files I've ran "file" on them with the following results

me@myPC:~/5510Part$ file bml6.img
bml6.img: data
me@myPC:~/5510Part$ file bml7.img
bml7.img: DOS executable (device driver)

I've tried mounting the files with no success I guess they are not common file partitions. I just want to take a quick look to check that there's no sensitive information in those files.
I'm not a complete newbie to linux but still my knowledge is fairly limited.

I don`t think using "file" to identify content of block memory is good idea.

I think we are clear about bml 6 and bml 7 they are not important, usualy clear partition.
Currently I need bml5, bml11 and bml14.
Please attach file`s bml file to post or give links

IMPORTANT INFO

check this:

[REF] Collection of public documents with informations about RFS and XSR (STL,BML,..)
http://forum.xda-developers.com/arch.../t-801223.html

All these docs are old.
Currently we have LinuStoreIII

Yes this information is quite useful, but now we should make new clockwork/open recovery. If we release first working rom, then we can play with kernel and low-level hardware coding[ASM/C].

Fist line in bml5.img open with HxD

FSR_STL.....ÿÿÿÿþÿÿÿ.............................. _.....R.....R..¤..€.................ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿ

-------------------------------------------

bml7.img : empy (all FFs)

--------------------------------

bml9.img :

kk@kk-V:~/Escritorio/bml$ sudo ./split_bootimg.pl bml9.img
Page size: 4096 (0x00001000)
Kernel size: 3073252 (0x002ee4e4)
Ramdisk size: 3144208 (0x002ffa10)
Second size: 0 (0x00000000)
Board name:
Command line:
Writing bml9.img-kernel ... complete.
Writing bml9.img-ramdisk.gz ... complete.
kk@kk-V:~/Escritorio/bml$

----------------------------------------------------------------

bml8.img : DBase 3 index file

#..... # MDL Factory download mode #..... bootmode = [%x] , [%x] .... HW Rev : %d...... >> LK(little kernel) ver %s......Nov 6 2010.ERROR: Could not do normal boot. Reverting .....to odin mode....aboot...Sasmsung....MSM7x27. androidboot.emmc=true..odin_init().....odin....usb _read() queue failed.....usb_read() transaction failed...usb_write() queue failed....usb_write() transaction failed..%s%s....MITS....OKAY....reset called....FAIL....mibib...samsung_get_full_bmlpart i success...samsung_get_full_bmlparti failed....need_to_format : %d..... #####################################.. # Part INFO differ!!! #.. # OneNAND re-partition mode #..===============================..... Name : %s..... Start : %d..... Num : %d..... ID : %d..... Attr : 0x%08x..... PARTITION INFO INVALID..... size? %d. need 2004!!..samsung_bml_format success..samsung_bml_format FAIL : %x ...ONW UPDATE FAIL!!!..ONW UPDATE FAIL.ODIN :: unknown partition name..ODIN :: image is not a boot image...cache...ODIN :: writing %d bytes to '%s'....ODIN :: partition '%s' updated..need update? NO!....ONW Boot Update SUCCESS.....odin: download mode start...wait for usb_read...SAMSUNG.odin: %s....COMMAND_SET_READY_SIZE.. Only Sbl.bin...........OK..ODIN Downloader, Image download START...Image size : %d..... %d size image received OK!.....COMMAND_VERIFY_PLATFORM1111.....cmd_verify _platform : %x....COMMAND_RESET_TARGET....RESET_USB...Change USB command is not available.....ONW Mode is not available...COMMAND_GET_BATTERY.....COMMAND_GET_PA RAMETER...init_param_info.....ODIN :: partition table doesn't exist...MSM7227 LK Bootloader...parameter...COMMAND_SET_PARAMETER...C OMMAND_ERASE_PARAMETER.....MIBIB Bootloader write..QCSBL write.....qcsbl...OEMSBL Bootloader write.....oemsbl..AMSS write to nand..amss....ARM11Boot Write.....arm11boot...boot(kernel) Write..RECOVERY Write..SYSTEM.RFS Write....DATA.RFS Write..CSC Write...Partition 10 is not exist...Wrong Command...odin: oops!...... Temperate is so HIGH => charging is Stopped!!...... Temperate is so LOW => charging is Stopped!!... Temperate is normal.... Temperate is normal(from HIGH) so charging is Restored!!... Temperate is still HIGH !!..... Temperate is normal(from LOW) so charging is Restored!!!!...... Temperate is still LOW !!...... Enable charging !!.... disable charging !!... charger_main Func [HSIL]...Charger Disconnect Good-bye!!!......#### ADC: %d....#### TEMP: %d...#### VF: %d.....#### Scal Lev: %d...Charging Ab-normal Temperature interrupt !!!!!...... Full Charged !!!!...... Recharging start!! !!......Charger [chg_info.vbatt_adc : %d] [Enable_charging : %d]....Charger Control Change %d -> %d.....#### Event Flag: 0x%x...EndKey Pressed!!!0x%d ......EndKey Pressed RESET!!!0x%d .... Charging .................. Full charged!!! !!....dev/fbcon/fbcon.c..._config.unknown framebuffer pixel format....Invalid keycode requested: %d...Invalid keycode posted: %d..In read completed function:Timeout, status %x...In Device ready function:Timeout, status %x.....Error: device not ready.....pm8058_gpio struct not defined..Failed on 1st ssbi_write(): rc=%d...FAIL pm8058_gpio_config(): rc=%d....Error in initializing SSBI_REG_KYPD_CNTL register...Error in initializing SSBI_REG_KYPD_SCAN register...dev/keys/gpio_keypad.c..qwerty_keypad...Error: read not completed...kpinfo->keymap && kpinfo->input_gpios && kpinfo->output_gpios...keypad..0x%08lx: ...0x%02hhx ...%08x %08x %08x %08x |...%c......|...panic (caller %p): ."(...%...(...%...%...%...%...%...(...%...(..~%... %..â'..â'..â'..â'..â'..â'..â'..â'..â'..â'...%...%. ..%...%...%...%...%...%...%...%..ª'...%...%...%... %...%...%...%...%...%...%...%...%...%...%...%...%. .z'...%...%..L'...%...%...%...%...%...%...%...%... %...%..,(..Z(...%...%...%..F(..Z(...%...%..4'...%. ..'...%..4&...%...%..Æ%...%..f(...%...%..`(...%..¼ %..0123456789abcdef0123456789ABCDEF<null>..ptn %d name='%s' start=%08x len=%08x flags=%08x type=%s Writable=%s.....lib/ptable/ptable.c.ptable && ptable->count < MAX_PTABLE_PARTS..ptable..Modem...No..¼...5þ...... ....Tñþ.°«.€„ñþ.°«.€Èñþ.°«.€0õþ.°«.€€...ÿÿÿÿ€...ÿÿ ....ÿÿÿÿ.....€mibib............................... ....qcsbl...................................oemsbl ..................................amss............ ....d...................efs2............o...a..... ..............nv_backup.......Ð................... ....fota............ä...d...................arm11b oot.......H.......................boot............ P...(...................recovery........x...(..... ..............parameter....... .......................system..........£...ý...... .............userdata........ ...Ð...................cache...........p...d...... .............*...)...(...'...&...%...L...#..."...! ... .......P...O...n...ŒJ..8@..T@..................... .º.…f....................................¶.&.


-----------------------------------------------------

PLEASE UPLOAD FILES AND DON`T POST OUTPUT FROM ANY PROGRAM, THIS FILES ARE NEED TO COMPARE WITH OTHER.

Sorry about shouting, but somebody have problems with reading with understanding.

Papudaso here are the filesyou wanted.

megaupload.com/?d=PQU39VZA

EDIT:

phone info

Model: GT-I5510L
Base band: I5510LVCJK3
Android Ver: Froyo 2.2 VCJK3
Kernel: 2.6.32.9-perf
latin.umts@samsung #1

These are my bml files:

bml5, 11, 14: h**p://tinyurl.com/3v4ttgz

Model: I5510
Firmware version: DDJK4
Country: India.