DXJV9 Multiupload Link: Download (158.1 MB) Double-click to extract
Special for DXJV9:
1. Flash with re-partition using 513.pit.
2. You will see a lot of red text after the flash is done, don't panic, just do a 'wipe data/factory reset' and reboot the device when done.
3. Let the device boot all the way then turn it off.
4. Re-enter Download Mode and re-flash only the CSC file without pit and without re-partition.
5. Enjoy
Credit for us having and sharing this firmware goes to some XDA members, there names will only be added if they wish.
Quote:
Quote:
Without bootloader:
Quote:
Gingerbread 2.3.3:
XXJVO Multiupload Link: Download (148.2 MB) Double-click to extract
XWJVH NEE Multiupload Link: Download (155.3 MB) Double-click to extract
XWJVH XEE Multiupload Link: Download (155.3 MB) Double-click to extract
XWJVB NEE Multiupload Link: Download (155.4 MB) Double-click to extract
XWJVB XEE Multiupload Link: Download (155.4 MB) Double-click to extract
XWJVA LUX Multiupload Link: Download (144 MB) Double-click to extract
XXJVK Multiupload Link: Download (146.5 MB) Double-click to extract
XXJVK Mediafire Link: Download (146.5 MB) Double-click to extract
Quote:
Quote:
How to flash:
Note: Re-partition is not a must, use it only if you need to change partition sizes on the device, but in most cases you will not need to repartition at all.
Quote:
If you haven't flashed your device before or you find it easier to follow with the help of videos then please follow these detailed HQ videos and descriptions made to you by itskapil: Easy Install Guide for noobs, and everyone! thanks to itskapil for his good work and for sharing these videos.
Quote:
No pit and no re-partition:
Quote:
* Start Odin without connecting the device. * Load the files that you want to flash:
PDA = PDA
PHONE = PHONE
CSC = CSC
* Put the phone on Download Mode and connect the device. * Wait for Odin to detect the device and hit Start
Quote:
With pit and re-partition:
Quote:
* Start Odin without connecting the device. * Load the files that you want to flash:
XWJVN Kernel:Download (5.6 MB) (Double-Click to extract)
XXJVQ Kernel:Download (5.6 MB) (Double-Click to extract)
DDJV9 Kernel:Download (5.6 MB) (Double-Click to extract)
XWJVK Kernel:Download (5.6 MB) (Double-Click to extract)
RSJV3 Kernel:Download (5.6 MB) (Double-Click to extract)
ZSJV6 Kernel:Download (5.6 MB) (Double-Click to extract)
JPJV6 Kernel:Download (5.6 MB) (Double-Click to extract)
JVJV9 Kernel:Download (5.6 MB) (Double-Click to extract)
ZWJV4 Kernel:Download (5.6 MB) (Double-Click to extract)
ZSJV5 Kernel:Download (5.6 MB) (Double-Click to extract)
DXJV9 Kernel:Download (5.6 MB) (Double-Click to extract)
XWJVI Kernel:Download (5.6 MB) (Double-Click to extract)
DDJV6 Kernel:Download (5.6 MB) (Double-Click to extract)
XXJVO Kernel:Download (5.6 MB) (Double-Click to extract)
XWJVH Kernel:Download (5.6 MB) (Double-Click to extract)
XWJVB Kernel:Download (5.6 MB) (Double-Click to extract)
XWJVA Kernel:Download (5.6 MB) (Double-Click to extract)
XXJVK Kernel:Download (5.6 MB) (Double-Click to extract)
* Flash zImage-root tar file as PDA with no pit and no re-partition, let the phone boot until it enters charging mode then disconnect the phone. * Re-enter Download Mode * Load the extracted original Kernel tar file as PDA only, no pit and no re-partition, connect the phone and flash the original Kernel. * Done!
Quote:
How to use ADB:
Quote:
* Download Android Software Development Kit r06 for Windows * Extract and copy the 'adb' folder from the extracted folder to drive C:\ (Don't run setup.exe inside it, just copy the folder) * Start a command prompt * Execute:
cd c:/adb/tools
adb shell
* Done, you are now using ADB
Quote:
How to mount /system for delete and copy operations:
Quote:
adb shell
su
stop
busybox mount -o remount,rw /dev/block/stl9 /system
Do what you want do as deleting and copying files, execute the following when done:
JIT:Enabled as a default setting. File System: RFS Keyboard: Samsung Keyboard TW-Launcher: Version nr. 3
Known bug/feature:
Buttons lights are always on when the screen is active/Fixed on XWJVH/XXJVO.
(You can find the fix for older versions here: Workable yet crazy method to get rid of LED glow when screen on Thanks to alelas for posting it.) No Shutdown Sound Clock Alarm gets disabled(if it has been set) when the user clears memory at Task Manager
Quote:
Swype and Input Languages:
XWJVK: US English
UK English
Eesti
Francais
Deutsch
Korean
Russian
Ukrainian
DXJV9: US English
UK English
Simplified Chinese
Thai
Tieng Viet
Bahasa Malaysia
Bahasa Indonesia
Korean
JPJV6: UK English
US English
Francais
Arabic
Persian
Urdo
Korean
ZSJV5/ZWJV4/ZSJV6: UK English
XWJVB/XWJVH: UK English
US English
Bulgarian (maybe)
Hrvatski
Dansk
Nederlands
Francais
Deutsch
Korean
Norsk
Romana
Srpski
Slovenscina
Svenska
XWJVN: AU English
US English
UK English
Deutsch
Francais
Espanol
Nederlands
Portugues Europeu
Polski
Turkce
Korean
XWJVA/XWJVI/RSJV3: UK English
US English
Cestina
Nederlands
Francais
Deutsch
Greek
Magyar
Italiano
Korean
Polski
Portugues Europeu
Slovencina
Espanol
Turkce
DDJV6/XXJVK/XXJVO/JVJV9/XXJVQ/DDJV9: UK English
US English
Nederlands
Francais
Deutsch
Italiano
Korean
Polski
Portugues Europeu
Espanol
Turkce
Developers wanting to interact with the Internet need to choose a package to do the … more
XDA Developers was founded by developers, for developers. It is now a valuable resource for people who want to make the most of their mobile devices, from customizing the look and feel to adding new functionality. Are you a developer?