I regret to tell you my phone damaged when upgrade the official 2.3..
so i can't do more for u8800,thanks your support！
I will try to after-sales service, so no need to donate
WARNING: if you use multi-boot, must restore offical partition, then upgrade the official 2.3
Modified Kernel - 1GHz, updated touchscreen driver, faster graphics.form dzo
Working Wi-fi & BT - Wi-fi shuts down when the screen is off by default, change this in Wifi Settings..Menu..Advanced..Sleep policy and set this to "never sleep" if you use wifi often.
Working Sensors,have issue
Working Audio Out and In
nearly all worked
not work：USB tether
Thanks to Dzo & stockwellVery much,nice work!
All original developers of CM7
: Dzo, stockwell, genokolar, CM
To install, first make sure you have a recovery image.
On first install you should really wipe your data partition, so backup all your apps using titanium backup.
Put the zip fille on the sdcard of the phone
switch off the phone
Boot into recovery by pressing power and volume up and keeping them pressed until the recovery menu appears
Select "install zip from sdcard" by pressing volume up/down and then pressing power.
Select "choose zip from dcard"
Select the file you downloaded
Wait until it finishes
Press back until you get to the main menu, select "reboot system now"
1, update to newest CM source code, detailed change see CM changelog
2, using dzo's kernel source + some cpu gov + more EMMC partition support
3, synchronous dzo part of the changes (camera, ril)
4, libhardware_legecy update, using the latest source CM7
5，Modify the ramdisk to avoid sometimes staying in the boot animation
1.Include some Gapps (gmail.gtalk.market)
2.Profiles can override wifi/bluetooth etc connection
3.Dzo lastest kernel source:
Add 192MHz to cpufreq list
Add 1.7GHz frequency
Increase vdd for 1.8 GHz to 1.425V
Disable gemini to get rid of green line in pictures
1.update to android 2.3.7
2.add X5settings to Settings Menu(from stockwell)
3.build libril liblights libaudio from sources(dzo/stockwell)
4.update wifi drivers&firmware(from stockwell)
6.use stockwell's kernel sources build kernel
7.new vold to increase sdcard transmission speed,add ntfs readonly support
8.add led notification color custom（Six colors）
1.fix libauido issue
2.fix phone issue
3.fix libril issue
4.add projectmenu to Settings（about phone--project menu）
now just upload a update zip package， later full zip package will upload
1.add Wifi hotspot/USB tether (from stockwell)
2.use u8800pro liblights（blink one times per three second）
3.use new libril-qc-1.so
4.use build gralloc
use stock rom's gralloc fix screen lag issue
fix default language is chinnese
fix Mute camera shutter not work!
libhardware_legecy update,not need load_libra
Sound modes and Brightness modes update,no need to configure
libsensors update,work fine for me
add cmstats.apk,let CM know the number of u8800's CM7 users
use new sensor.default.so,fixed compass
kernel add zram ,let you could use comcache
kernel use xz compress
unlock 30FPS,you could edit /system/etc/enhanced.conf to close it
maybe its final 32 kernel's CM7
can't use franco.Kernel
In fact, users in China use the U8800, multi-system has been used for a long time.
So, now I will use my broken English to tell you how to use multi-system
First, you need The extra two partitions in the 4G space
. you could use twosys-partition.zip to get The extra two partitions 15&16
download partition package:http://forum.xda-developers.com/atta...1&d=1321675310
The second system-specific recovery system
put the twosys-partition.zip and you like rom's zip into Sdcard
rename the recovery_188.8.131.52_en_sys2.img to recovery2.img , then place it to /cust
Boot into recovery,flash this package directly, same as flashing a ROM.
After flashing go to advanced options, choose to reboot to recovery.
Go into recovery again, flash this package again directly, same as flashing a ROM.now you will have The extra two partition 15 and 16
OK, let's flash two system into you phone
Go into recovery again, flash you like rom's zip
boot into first system, you could use RootExplorer access /cust, rename the recovery.img to recovery1.img, rename the boot.img to boot1.img,rename the recovery2.img to recovery.img.
reboot you system into recovery, now you recovery is second system recovery,you could flash the 100911-cm7,it will auto flash into second system.
reboot system, you will into second system (CM7)
if you want change you system to first, you could use RootExplorer access /sbin/gk, you will found some .sh files,Execution the 8-ChangeSys will auto rename all
img file then auto reboot to first system.
you could copy the 8-changesys.sh to any place let you change system easy.
restore offical partition ： download
：only the 100911-CM7 can flash into second system, other ROM only flash into first system
please backup your data, because you will lost all data in phone