5,600,984 Members 43,861 Now Online
XDA Developers Android and Mobile Development Forum

How to unbrick Samsung Galaxy Ace

Tip us?
 
SuperMini
Old
(Last edited by SuperMini; 16th November 2012 at 10:18 PM.)
#1  
Junior Member - OP
Thanks Meter 58
Posts: 16
Join Date: Aug 2008
Angry How to unbrick Samsung Galaxy Ace

How to unbrick Samsung Galaxy Ace

If your phone doesn’t boot into download mode and you have a black screen after flashing froyo heres how you unbrick it, it worked for me .

Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;

Step 2 – Remove battery and connect your galaxy ace to the computer;

Step 3 -- Insert battery holding Volume down + Power + Home

Step 4 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);

Step 5 – Click Start button in Odin and wait about 5 min.

If all goes well it should come back to life.

Get the roms from sammobile site.

Be sure that you download de correct firmware for your device version.
The Following 55 Users Say Thank You to SuperMini For This Useful Post: [ Click to Expand ]
 
omerhadad
Old
#2  
Member
Thanks Meter 4
Posts: 77
Join Date: Mar 2011
Good mannnnnn ֱ
The Following User Says Thank You to omerhadad For This Useful Post: [ Click to Expand ]
 
Declive
Old
#3  
Junior Member
Thanks Meter 1
Posts: 4
Join Date: May 2011
Quote:
Originally Posted by SuperMini View Post
How to unbrick Samsung Galaxy Ace

If your phone doesn’t boot into download mode and you have a black screen heres how you unbrick it, it worked for me .

Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;

Step 2 – Remove battery, SIM and SD card, next connect your galaxy ace to the computer;

Step 3 – Hold Volume down + Power + Home button at the same time;

Step 4 – Insert the battery and wait a bit;

Step 5 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);

Step 6 – Click Start button in Odin and wait about 5 min.

If all goes well it shoul come back to life.

Don't work for me...
The Following User Says Thank You to Declive For This Useful Post: [ Click to Expand ]
 
magatxda
Old
#4  
Junior Member
Thanks Meter 1
Posts: 15
Join Date: Apr 2010
Thumbs up you saved my day

I was about to send my phone to support centre!

Cool, brought back to life.

I wish we had a thread listing all these tricks.
 
isnwinyetra
Old
#5  
Junior Member
Thanks Meter 3
Posts: 2
Join Date: Apr 2011
Location: Payakumbuh
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on

<1> setup connection..


I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.

please somebody help for the solution....

Thanks,
The Following 2 Users Say Thank You to isnwinyetra For This Useful Post: [ Click to Expand ]
 
princenoob
Old
#6  
Senior Member
Thanks Meter 15
Posts: 189
Join Date: Apr 2011
Location: Baguio City
Quote:
Originally Posted by isnwinyetra View Post
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on

<1> setup connection..


I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.

please somebody help for the solution....

Thanks,
There is no solution for that. Did you try making usb test jig?



Sent from my GT-S5830 using Tapatalk
Current Devices:
Samsung Galaxy S3 - Jellybean 4.1.2 Stock Rooted
Nexus 7(2012)- Vanir ROM with oxydo kernel

Past Devices: Motorola Atrix, Samsung Galaxy S2, Samsung Galaxy S1, Sony Ericsson Xperia Arc S, Motorola Xoom, iPhone 4, Samsung Galaxy Ace, iPad Mini, Samsung Galaxy Spica.
The Following User Says Thank You to princenoob For This Useful Post: [ Click to Expand ]
 
Hatshipuh
Old
#7  
Senior Member
Thanks Meter 192
Posts: 445
Join Date: Apr 2011
Quote:
Originally Posted by isnwinyetra View Post
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on

<1> setup connection..


I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.

please somebody help for the solution....

Thanks,

There is no solution, I know several cases where people destroyed their Ace this way.
Why do people even bother to pamper with their phones when they have no clue...
 
isnwinyetra
Old
#8  
Junior Member
Thanks Meter 3
Posts: 2
Join Date: Apr 2011
Location: Payakumbuh
Not yet, ok i'll try using usb test jig, but there is any tutorial video to do this thread??

Sent from my GT-I9000 using XDA App
The Following User Says Thank You to isnwinyetra For This Useful Post: [ Click to Expand ]
 
hafizm
Old
#9  
Junior Member
Thanks Meter 0
Posts: 6
Join Date: May 2011
Quote:
Originally Posted by isnwinyetra View Post
Not yet, ok i'll try using usb test jig, but there is any tutorial video to do this thread??

Sent from my GT-I9000 using XDA App
Did it working???
 
u2madhav
Old
#10  
u2madhav's Avatar
Junior Member
Thanks Meter 0
Posts: 5
Join Date: Feb 2011
Thanq... Thanq...
works fine for me.. great job.

Tags
unbrick galaxy ace
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes