[NoDo ROM]HD7_Telstra_WWE_3.04.206.01_Radio_5.66.09.21a_22.4 8.50.21U_NoDo, by ansar

---

Dear forum members,


In the following A, B, C and D sections is described the flashing process

of the NoDo unbranded ROM: RUU_Schubert_Telstra_WWE_3.04.206.01_Radio_5.66.09 .21a_22.48.50.21U_NoDo




A. Pre-Requisites


If your HD 7 is flashed with a ROM of the following release:

1. RUU_Schubert_Telstra_WWE_1.50.841.02_Radio_5.61.09.15a_22.31.50.09U

then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM

In case your HD 7 is flashed with a different of the above 1 ROM but your Firmware version at your phone settings>about>more information

is of the form xxxx.yy.zzzzz.841 i.e. with characteristic value 841

then you can also flash the following NoDo unbranded ROM, but you can comeback only to the above 1 ROM



B. Downloading


You must download the following 2 ROMs:


1. Download this zip ROM file: RUU_Schubert_Telstra_WWE_3.04.206.01_Radio_5.66.09 .21a_22.48.50.21U_NoDo_by_ansar

2. Download this zip ROM file: RUU_Schubert_Telstra_WWE_3.04.206.01_Radio_5.66.09 .21a_22.48.50.21U_NoDo_Signed_by_ansar


Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice



C. Flashing Process


In order to successfully flash the provided ROMs you must follow these steps:


1. Flash the ROM of the above (B.1.) extracted zip ROM file

2. After flashing HD 7 will automatically enter again in bootloader mode

3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]

4. Ignore it and exit from ROMUpdateUtility

5. Now flash the ROM of the above (B.2.) extracted zip ROM file

6. After flashing your HD 7 will boot normally

7. Exit from ROMUpdateUtility and proceed with your brand new ROM

If you do not want them you can delete all operator apps, in order to have more free RAM

Beware, in WP7 deleting an application means it is deleted from ROM



D. ROM Flashing Instructions


In order to flash a ROM follow these steps:

1. Press and hold power-on/off button to power-off the phone

2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode

3. When your phone enters the tricolor screen bootloader mode, release volume-down button

4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable

5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop

6. After completion of (D.5.) above, check the usb message connection on your phone screen

7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted

8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen



Till next version enjoy!!!

Regards, ansar

Ansar, will this work on TMOB ROM like that one you've released (version 2.2 I think) that was from TELSTRA?

The procedure is the same, right?

Thanks,
Cris

Originally Posted by cpimentel

Ansar, will this work on TMOB ROM like that one you've released (version 2.2 I think) that was from TELSTRA?

The procedure is the same, right?

Thanks,
Cris

Hi,

This ROM is addressed for the Telstra operator only

Regards, ansar

Would it be possible to prepare this rom (or another 3.04) for the 401 europe device? Thanks.

Originally Posted by g8brush

Would it be possible to prepare this rom (or another 3.04) for the 401 europe device? Thanks.

Hi,

I have already this: RUU_Schubert_HTC_Europe_3.04.207.01_Radio_5.66.09. 21a_22.48.50.21U

But some networking pros is restricting me to upload it yet

Did you try this one:[NoDo ROM]HD7_HTC_Europe_3.03.502.04_Radio_5.66.09.09a_22.46 .50.21U_NoDo, by ansar

Regards, ansar

I've tested calls and am now in the process of updating from this ROM to the mango beta, but must admit I was a little concerned that I saw an O2 operator logo and it's default region is the UK??

Update:
After running this ROM for 24 hours it appears to work fine on Telstra's network, but I really think this was ment for O2 in the UK. It has O2 branding throughout the phone, including theme colours and splash operator logo.

Hi,

It is on the title, CV 206 is O2 UK operator

Regards, ansar

what?

---

Originally Posted by ansar.ath.gr

Hi,

This ROM is addressed for the Telstra operator only

Regards, ansar

THIS IS A LOAD OF CRAPP AND YET YOU REFUSE TO SHARE HOW YOU GOT TELSTRA ROM FLASHING ON TMOBILE HD7
YOUR A CLASS ACT BRO YOUR LACK OF FLUENCY IN ENGLISH IS NOT AN EXCUSE!!
IF YOU DONT WANT TO SHARE THEN DONT POST ****!!

Whoa, where does all that anger come from. Remember this is a forum where people give freely. You don't have to be part of the discussion or even enjoy the fruits of other peoples labour. However, senior member or not, we don't have the right to attack someone in this manner.

As an aside thanks to Ansar for his development work.

I think you can pm him personally on how he manage to get the ROM.