[Q] screen - digitizer

---

broken cant find any replasment..any help please?

You tried ebay?

sure did..but there is nothing. i found a uk used seller (he sold over 150 digitizers) but no available any more...

i need a digitizer for that phone (zte blade - orange san fransisco or dell).. i only have it for 2 weeks

Probably just as cheap to buy a new phone.

Originally Posted by sirios6

sure did..but there is nothing. i found a uk used seller (he sold over 150 digitizers) but no available any more...

i need a digitizer for that phone (zte blade - orange san fransisco or dell).. i only have it for 2 weeks

you can find 100% Genuine ZTE Blade Front Fascia + digitizer screen in HERE

Dealsextreme.com

I think this will help you. if it does please THANK me.


Sent from my Blade

Helo.
My gf has ZTE blade, suddenly she wakes up one morning and the digitizer looks like spider net (as ussually noone did that, right...). So this wouldn't be a problem, im IT fan, so the order of new digitizer after a few informations flew to me was placed and the digitize came, even with the tools to replace - it is this one:

ebay

I replaced it and all fitted together, everything was cool, BUT! (here it is, when the trouble starts)
It doesn't recognize touches.

So after the whole summer I had some time to do a little research and found this post in forum on DX site, where they sell the digitizers:

Not valid for ZTE Blade (European) -> Hi all.
I've bought and installed this touch screen. The phone don't recognize it. It doesn't work.
The chip is diferent than the original. The chip's mark of the original screen is synaptics. Although in the screen is printed ZTE like the original.
I suspect that this model is incompatible with the european phone at least.

So does anyone know, how to find the correct model? As everyone, I dont want to spend extra money for something not working with my model.

The model of the phone is this one, so with the TFT screen, not the OLED. already rooted.

Can the problem be caused by the phone beiing rooted? I dont believe that.
Thanks all, xda has always been my best hope in unsolvable problems

Try a more recent rom, like Cyanogen 7.2, I think they changed the digitizer in later models.

Originally Posted by wbaw

Try a more recent rom, like Cyanogen 7.2, I think they changed the digitizer in later models.

There is ICS with CM i think, so it's one of the latest. Are there any other suggestions please? Don't tell me,that XDA won't come up with something

you need to find out exactly what chipset it is & if there is a driver in the kernel for it. if it's a standard blade touchscreen (there have been a few different versions) then it should work in recent cm7 or cm9 & most roms based on those. if there is a working kernel driver for the digitizer, then either your new digitizer doesn't work, there is some other fault on the phone, or you connected it wrong.