Originally Posted by g.n.a.k

Same as you for Data2EXT. I tried:
_ MagDlr + Recovery 3.2.0.1 + System 400 + Normal packages
_ MagDlr + Recovery 3.2.0.1 + System 395 + ...
_ MagDlr + Recovery 4.0.0.0 + System 400 + ...
_ MagDlr + Recovery 4.0.0.0 + System 395 + ...
Each time I partitioned the sdCard with 1gb EXT using minitool (one time recovery to try). I tried installing small packages instead normal ones but same error.
I was desesperate i tried using Clk: same...

I always get the same messages at the first boot:
"android.process.acore is not responding" Wait...
"Process com.android.phone is not responding" Wait...
"Process system is not responding" Wait 10min and... nothing except this white screen and these green HTC letters...

HELP! ^^

I installed Data2EXT cLK but i have the same errors when I boot.
The message disappears when I press wait but the phone is also working slow.
So there is an error somewhere and the boot error appears every time.

WHAT MUST I DO?

Hey for mgldr app2sd do i install base first then app ext then app system ??in that order?

Originally Posted by beston94

Hey for mgldr app2sd do i install base first then app ext then app system ??in that order?

Read First post:

App2SD MAGLDR

1.eclipse_base_2.0.0.0.zip
2.eclipse_app_ext_2.0.0.0.zip

So just flash base then app ext then... extras if you want but not app system.

Originally Posted by birel3107

Hey there,

just one question concerning this rom:

Is there anyone else whose market doesn't work?

If i want to download sth. it just says: "Download is being started" (Download wird gestartet), but nothing happens?!

Keep trying it'll work...usually works by the third try. I have this same problem sometimes. Don't know the cause.

Partitioned with:

misc ya 1M
boot yboot|ro 5M
system ya 400M
cache ya 5M
userdata ya|asize|hr allsize

And installed:

NAND-only MAGLDR
eclipse_base_2.0.0.0.zip
eclipse_app_system_2.0.0.0.zip

can't get nand working ..

Just the green HTC logo like partition is bad or something..

i think same problem as above partition is 230 with the cahce 5 and boot 5

app base in stalled and app exyt installed and stuck on the green htc for 9 minutes now.....

Originally Posted by brandon7gr

Ok here are my results until now:

I would like to tell you that i know how the procedures goes and i had already installed 1.3 of this ROM.

1) So the first attempt was with MAGLDR Data2EXT. I did the task29, i installed magldr, i did the 400mb partitioning and i installed the first three zip files! The installation was successfull, but when i enter my pin the htc setup was not there! I left the phone for about 10 minutes (with small taps in the screen) and sudenly the setup was there. After the setup and the flashing of the new file everything was ok! BUT there were huge pauses in the phone. I did the procedure TWICE just in case, but the same!! I am starting to think that perhaps my 8gb Sandish card is not so quick that's why i have these huge pauses!! (i have to say that i made successfull the 1GB EXT4 in the card...and i did the WHOLE process two times).

2) I installed the 1.3 version just to see that everything is ok! Yeap everything was great. So i thought that maybe install NAND-ONLY to see how it works on 2.0 !! I did again the whole process and when i flash the two files then my phone was stucked to the HTC logo (the green one with the black wallpaper). Again Task29 etc etc and again the SAME! I left the phone about 15 minutes !! (i other cases my phone was working in 5 minutes maximum).

3) I am trying now to install App2SD. (I will tell you results in a while).


Result: There is something weird with the releases or my phone sudenly refuses these roms

P.S. Everytime i did clear wipe etc! So no problem with that.

Ok i am back !! Yes as i was hoping, App2SD is working fine !!!!!

So as i am reading from others and talking about MAGLDR to sum-up:

1) App2SD is working great.
2) Data2EXT is NOT working with some memory cards (making the phone very slow, can't download from market etc).
3) Nand-Only is just not working.

Are these info correct?? Can someone confirm that nand-only is working on his phone so the others can identify the problem?

Originally Posted by g.n.a.k

Same as you for Data2EXT. I tried:
_ MagDlr + Recovery 3.2.0.1 + System 400 + Normal packages
_ MagDlr + Recovery 3.2.0.1 + System 395 + ...
_ MagDlr + Recovery 4.0.0.0 + System 400 + ...
_ MagDlr + Recovery 4.0.0.0 + System 395 + ...
Each time I partitioned the sdCard with 1gb EXT using minitool (one time recovery to try). I tried installing small packages instead normal ones but same error.
I was desesperate i tried using Clk: same...

I always get the same messages at the first boot:
"android.process.acore is not responding" Wait...
"Process com.android.phone is not responding" Wait...
"Process system is not responding" Wait 10min and... nothing except this white screen and these green HTC letters...

HELP! ^^

I gave up...haha...i tried App2Sd and its working fine...guess i am going to stick to App2Sd not Data2Ext...

I have tried every possible method and solution to install Data2Ext....still no luck...guess my phone doesn't like Data2Ext after using few months using of App2Sd... lolx ^^

I really don't know - keeping all instructions I have my Data2Ext working from first boot without any problem. Even beta version before and release version now...

Sent from my HD2

Originally Posted by brandon7gr

Ok i am back !! Yes as i was hoping, App2SD is working fine !!!!!

So as i am reading from others and talking about MAGLDR to sum-up:

1) App2SD is working great.
2) Data2EXT is NOT working with some memory cards (making the phone very slow, can't download from market etc).
3) Nand-Only is just not working.

Are these info correct?? Can someone confirm that nand-only is working on his phone so the others can identify the problem?

Hey, I can confirm this.
Tried 10times to get Data2Ext CLk to work It doens'nt.

App2SD Clk works fine.